Ryobi Miter Saw Parts List and Diagram Explained | Match Your Model Number

A Ryobi miter saw parts list and diagram is valid only for one model number, so match the saw’s nameplate to its own manual before ordering any part.

Two saws can share a 7-1/4-inch blade yet use completely different guards, flanges, and switches. Ryobi builds miter saws on three platforms — corded TS, sliding TSS, and cordless P-series ONE+ — each with its own illustrated breakdown. Find the exact number on the tool, pull that model’s parts page, then confirm the callout against the list before buying.

Where The Model Number Lives On The Saw

The exact model number is stamped on the nameplate, usually on the motor housing or near the base, and that number — not the blade size — unlocks the correct diagram. Record the full string and any serial or production information beside it. Ryobi’s product pages list included components, specifications, manuals, warranty terms, and a replacement-parts support link, so the model page indexes the parts breakdown. A generic diagram from a search result is the most common reason people order the wrong guard or arbor part.

Current US-listed models include the TS1144, TS1346, TSS702, TSS103, TSS121, P553, PBT01B, PBLMS01B, and PBLMS01K. Saws built for other regions aren’t covered by US diagrams, and part availability can shift between revisions.

Saw Model Platform And Blade Listed US Price
TS1144 Corded, 7-1/4-inch, 9-amp $149.00
TS1346 Corded, 10-inch, 14-amp, LED cutline $179.00
TSS702 Corded sliding, 7-1/4-inch, 10-amp $219.00
TSS103 Corded sliding, 10-inch $269.00
TSS121 Corded sliding, 12-inch, LED $329.00
P553 18V ONE+, 7-1/4-inch, tool only $189.00
PBT01B 18V ONE+, 7-1/4-inch sliding, tool only $239.00
PBLMS01B 18V ONE+ HP brushless, 10-inch sliding $299.00 promo
PBLMS01K 18V ONE+ HP brushless 10-inch kit $399.00

How To Read The Illustrated Parts List Correctly

The diagram is a numbered map: each callout number points to one parts-list line giving the description, quantity, and whether the item ships alone or as a complete assembly. Work in this order:

  1. Open the model’s Ryobi product page and select Manuals or Replacement Parts.
  2. Find the callout number on the drawing, then match it to the same number in the list.
  3. Check whether the part is sold individually, bundled in an assembly, or discontinued.
  4. Confirm blade diameter, arbor size, battery platform or corded amperage, and left/right orientation.
  5. Compare the revision printed on your manual against the one on the parts page.

Reassembly follows the operator’s manual sequence and fastener specs. Substituting unverified hardware, a blade guard, or a flange is where repairs turn into safety problems.

If a part number comes back discontinued, aftermarket options exist and are worth comparing on fitment and material — the roundup of tested Ryobi miter saw replacement parts covers common wear items by saw family.

Compatibility Mistakes That Cost Real Money

Blade size alone proves nothing, and the three model prefixes mark genuinely different machines that share almost no internal parts. TS designates corded compound saws, TSS corded sliding saws, and P numbers the 18V ONE+ cordless platform. A 7-1/4-inch part from a TS1144 does not automatically fit a TSS702 or P553, though all three spin the same blade diameter.

The cordless trio deserves caution. P553, PBT01B, and PBLMS01B run on the same 18V batteries but carry different assemblies and cutting capacities —

Warranty is another reason to stay exact. Ryobi’s listed products carry a 3-year warranty, and unauthorized modification or an incompatible part can affect coverage. Ryobi’s own documentation is the authority — the TS1346 10-inch compound miter saw page shows how manuals and parts support are laid out for one model.

Safety Before Any Repair

Remove power fully before the housing comes apart — unplug corded saws and pull the battery on every 18V ONE+ model. Keep guards installed, secure the workpiece, and use only the blade and arbor configuration the manual specifies. Parts diagrams are a purchasing tool, not a service authorization; any repair touching the brake, switch, arbor, or electrical components belongs with a qualified technician unless the manual explicitly walks you through it.

Common Questions

Can I use a parts diagram from a different Ryobi saw?

No. Diagrams are drawn for one model and revision, and callout numbers rarely line up between saws. Even saws with the same blade diameter can use different guards, flanges, and switches. Always pull the diagram matching the model number on your nameplate.

Does a Ryobi cordless miter saw come with a battery?

Only kit versions do. The P553, PBT01B, and PBLMS01B are tool-only configurations, so battery and charger are sold separately. A model number ending in K, like PBLMS01K, indicates the kit that includes the battery and charger setup.

What if the part I need is discontinued?

Check the model’s product page first, since availability varies by revision. If the part is gone, aftermarket equivalents are widely sold, but verify arbor size, orientation, and material before installing. Avoid any substitute for a blade guard, flange, or electrical component unless approved for that exact saw.

Sources

Scroll to Top