9 Best Ryobi Miter Saw Replacement Parts | Match The Part Number

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your Ryobi miter saw is sitting dead because a handle snapped or the blade guard won’t retract, you don’t need a new saw — you need the one part with the right number stamped on it. Match your exact model number before you click buy, because a guard built for a 12-inch TSS121 will not bolt onto a 10-inch TSS102L. This guide breaks down nine real replacement parts, from a complete handle assembly to a pack of motor brushes, so you can get the saw cutting again instead of shopping for a whole new machine.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Every pick below is a genuine part, and the ones that fit best are the ones whose part number you check twice before ordering. Here are nine Ryobi miter saw replacement parts worth your money and your bench time.

Top Picks

080016005717 Handle Assembly for TTI Ridgid Ryobi TSS102L Sliding Compound Miter Saw with Laser
Best OverallTTI Ridgid Ryobi TSS102L Handle Assembly4.5+★150+ ratingsA snapped handle is the fastest way to retire a good saw — this assembly brings it back If your TSS102L’s handle cracked at the grip or the trigger housing let go, this is the piece that puts the saw back in your hands.Check price on Amazon
Ryobi A18MS01 Miter Stand (4 Pack) Replacement Foot End Cap # 0000220201-4pk
Best For Stand FeetRyobi A18MS01 Miter Stand 4 Pack4.5+★50+ ratingsFour little caps that stop your miter stand from limping across the shop floor A missing foot cap is a cheap problem until it isn’t — the stand wobbles, the saw walks, and you catch yourself shimming a leg with a scrap of plywood.Check price on Amazon
8 Pack 089006017092 Carbon Motor Brush Compatible with Ridgid Tile Saw R4040 R4041S and Ryobi Miter Saw TS1344 TS1345
Best 8-Pack8 Pack Carbon Motor Brush R4040 TS13444.0+★20+ ratingsWhen the saw sparks and sags, fresh carbon brushes are the cheapest resurrection you can buy Carbon motor brushes are the consumable that quietly gives out — they ride against the spinning commutator to feed current into the motor, and…Check price on Amazon

How To Choose The Best Ryobi Miter Saw Replacement Parts

The most common mistake with replacement parts is ordering by the photo instead of the model number on your saw’s data plate. Your saw’s model number is the key to the whole catalog. A blade guard that fits a TSS102L or TS1345L is a different animal from one built for the TSS121, TSS121T, or TSS120L family.

Start With Your Model Number, Not The Photo

Flip your saw over or look at the badge on the motor housing. That string — TSS102L, TS1345L, TSS121, TSS120L, TSS121T — tells you which part numbers will bolt on. A guard keyed to 089240023710 is built for the 12-inch TSS121/TSS121T/TSS120L saws, while a guard keyed to 080016005704 is built for the 10-inch TSS102L and TS1345L. Get that wrong and you’ll be boxing up a part that never touched your blade.

Decide Between Genuine OEM And Aftermarket

A genuine OEM part carries the Ryobi part number and is the exact piece the factory fitted. An aftermarket copy can save money but varies more in fit. When a part is a moving safety component like a blade guard, fit matters more than a few dollars. For wear items like carbon motor brushes, a multi-pack aftermarket set makes more sense because you’ll be replacing them again eventually.

Know Which Parts Wear Out First

Carbon motor brushes are a consumable — they slowly wear down as they carry current to the motor, and a saw that sparks heavily or loses power often just needs fresh brushes. Blade guards crack or lose their return spring. Handles snap at the grip. Foot end caps go missing in a move. Matching the wear item to the symptom saves you from replacing the wrong thing.

Side-by-Side Comparison

Model Best For Fits Saw Model Part Number Item Weight Amazon
080016005717 Handle Assembly★ Best Overall A snapped or loose handle TSS102L (TTI Ridgid/Ryobi) 080016005717 0.33 kg Amazon
Ryobi A18MS01 Foot End Cap (4 Pack)Best For Stand Feet Missing stand feet A18MS01 miter stand 0000220201 22.68 g Amazon
8 Pack Carbon Motor BrushBest 8-Pack Spark-heavy, weak motor TS1344, TS1345 089006017092 — Amazon
Zero Clearance Insert Cleaner, tear-out-free cuts 10in TSS103 RYOBI PARENT 5.9 ounces Amazon
Lower Blade Guard 080016005704 Genuine factory guard TSS102L, TS1345L 080016005704 0.52 kg Amazon
4PCS Blade Guard Assembly Budget guard backup TSS102L, TS1345L 080016005704 0.5 kg Amazon
089240023710 Blade Guard 12-inch saw guard swap TSS121, TSS121T, TSS120L 089240023710 — Amazon
Lower Blade Guard for TSS102L/TS1345L Rugged PC-and-iron guard TSS102L, TS1345L 080016005704 1.1 pounds Amazon
Genuine Ryobi 089240023710 Lower Guard OEM 12-inch replacement TSS121, TSS121T, TSS120L 089240023710 1.5 pounds Amazon

Detailed Reviews

★ Best Overall

1. TTI Ridgid Ryobi TSS102L Handle Assembly

Our pick — 4.5+★ from 150+ verified ratings; the strongest balance of quality and price.

Plastic HandleFits TSS102L

A snapped handle is the fastest way to retire a good saw — this assembly brings it back

If your TSS102L’s handle cracked at the grip or the trigger housing let go, this is the piece that puts the saw back in your hands. It is a replacement handle assembly built for the TTI Ridgid and Ryobi sliding compound miter saw with laser, and it drops on as a bare unit — the handle itself in black and silver, molded in plastic, weighing just 0.33 kg (about 0.7 pounds) so it adds almost nothing to the saw you’re already lifting.

The thing that wins people over is fit. A handle that lines up with the factory mounts, the trigger linkage, and the laser-saw housing is what makes this a clean swap rather than a project. It brings a saw downed by a cracked grip back to the bench, and buyers rate it 4.5+ stars across 150+ ratings — strong for a single replacement part.

The honest catch is that this is one handle assembly, not a full frame or a motor side. It suits the TSS102L family specifically, so check your plate before ordering — a different model number means a different mount pattern. And it ships as the bare handle component, so you transfer your existing hardware rather than getting a box of new bolts.

What Lands Well

  • Factory-style fit that lets the handle bolt back on the TSS102L housing
  • Featherweight 0.33 kg plastic assembly keeps the saw balanced in hand
  • Brings a saw downed by a cracked grip straight back into service

Where It Bites

  • Bare-tool only, so you reuse your existing fasteners
  • Model-specific — wrong saw number means wrong mount

Grab this if: your TSS102L handle is snapped, loose, or the trigger housing is shot and you want the original-style grip back.

Hold off if: your saw is a different Ryobi model — a handle for another housing will not line up.

Best For Stand Feet

2. Ryobi A18MS01 Miter Stand 4 Pack

4 PackGenuine Ryobi

Four little caps that stop your miter stand from limping across the shop floor

A missing foot cap is a cheap problem until it isn’t — the stand wobbles, the saw walks, and you catch yourself shimming a leg with a scrap of plywood. This Ryobi A18MS01 replacement set fixes that squarely. You get 4 caps, each weighing 22.68 g, sold as a 4 Count pack under genuine Ryobi part number 0000220201.

Fit is where this one does its work, and it does it reliably. The caps slip onto the A18MS01 miter stand legs the way the originals did, so the stand sits level again. Anyone who has ever moved house with a folding stand and arrived with two feet short will recognize the fix instantly — the replacement caps bring a stand back to its full four.

The limit worth knowing is scope: this is the foot cap set for the A18MS01 stand, not the saw itself. If you’re chasing a part for the saw head or the blade guard, this is not it. The 4-pack means you re-cap all four legs at once rather than hunting for a pair, which is the sensible way to do it anyway.

Value read: a 4 Count pack of 22.68 g end caps is a small, sensible buy that restores a level stand without replacing the whole A18MS01 frame.

One note: these are specific to the A18MS01 stand — they are not a universal leg cap.

Best match: an A18MS01 stand owner missing one or more feet and tired of a rocking platform.

Wrong tool if: the part you actually need lives on the saw, not the stand.

Best 8-Pack

3. 8 Pack Carbon Motor Brush R4040 TS1344

8 CountCarbon Steel

When the saw sparks and sags, fresh carbon brushes are the cheapest resurrection you can buy

Carbon motor brushes are the consumable that quietly gives out — they ride against the spinning commutator to feed current into the motor, and when they wear short the saw sputters, sparks, and loses its punch. This Potiarey set gives you 8 brushes for the Ryobi miter saw TS1344 and TS1345, and also crosses over to the Ridgid tile saw R4040 and R4041S. Part number is 089006017092.

The count is the whole pitch here. A single-brush part leaves you short in a hurry, but an 8 Count pack means you have spares for the next few servicing rounds on a saw you plan to keep. The brushes are carbon steel, and the install is a few-minutes job with the saw unplugged — power off, basic tools, gloves on, working order back on.

Here’s the trade-off: this is a brush kit, not a motor rebuild in a box. If the commutator itself is scored or the windings are gone, fresh brushes won’t save it. Treat this as the routine wear-item fix — exactly the thing you reach for before you’d ever consider a new saw.

Why the pack wins: 8 Count of carbon steel brushes against the single-piece alternative gives you a service stockpile, not one shot.

Know your fit: built for the Ryobi TS1344 and TS1345 — confirm your model before ordering.

Reach for this: a TS1344 or TS1345 owner chasing weak motor performance or visible arcing.

Not the fix: a motor with mechanical damage that fresh brushes cannot revive.

Precision Pick

4. Zero Clearance Insert Ryobi TSS103

PVCCustomizable

A small PVC plate that tightens the gap under the blade and cleans up your cut edges

If your trim and picture-frame cuts keep tearing out at the back edge, the culprit is usually the wide gap in the factory throat plate. This zero clearance insert closes that gap so the blade is supported right up against the material. It is a PVC insert cut for the Ryobi 10in TSS103 miter saw, weighs 5.9 ounces, and can be customized so the slot matches your blade’s exact size.

What it earns its keep on is cut quality. A tight gap supports the wood on both sides of the kerf, so softwood, hardwood, and thin veneers all come through with less splintering. It also blocks small offcuts from dropping through the slot and jamming up against the blade, which is a safety point worth taking seriously. And by curbing air intake through the blade gap, it takes some of the whine out of the cut.

The catch is that a zero clearance insert is a precision add-on, not an out-of-box drop-in for every saw. It is made for the 10in TSS103, and because it is PVC you cut the slot to fit your own blade rather than getting a pre-slotted plate. That’s a five-minute job, but it is a job.

Precision angle: customizable PVC plate lets you dial the slot to your own blade for cleaner, tear-out-free cuts.

Fit check: built for the 10in TSS103 — other Ryobi 10-inch models need their own insert.

Made for: a TSS103 owner chasing cleaner edges on trim, frames, and veneer work.

Think twice if: you want a pre-slotted plate that drops straight in with no trimming.

Genuine OEM Guard

5. Ryobi Lower Blade Guard Assembly 080016005704

Genuine RyobiFits TSS102L / TS1345L

The factory guard, in the factory part number — the safe swap when the original cracked

When a lower blade guard cracks or its return spring gives up, the saw becomes something you should not run. This is the genuine Ryobi lower blade guard assembly, part number 080016005704, and it fits the Ryobi 10″ compound miter saw models TSS102L and TS1345L. It arrives in black, grey, and clear, weighing 0.52 kg.

What makes this the safe bet is the OEM pedigree. It is a genuine Ryobi part through and through, not a lookalike, so the mounting points and geometry match what left the factory. Fit is the thing that wins people over here, and the guard gets described time and again as an excellent, factory-quality piece. The saw’s protective cover goes back on the way it was designed to.

The plain truth: this is one guard for two 10-inch models. If you run a 12-inch TSS121-family saw, this is not your part — you need the 089240023710 guard instead. And it is a single piece, so confirm the rest of your guard linkage is intact before you fit it.

OEM confidence: genuine Ryobi part 080016005704 matches the original mount for a clean, correct fit on TSS102L and TS1345L.

The limit: model-specific to those two 10-inch saws — 12-inch owners need a different guard.

Right part for: a TSS102L or TS1345L whose lower guard is cracked, stuck, or missing its spring.

Not for you if: your saw is a 12-inch model that takes the 089240023710 guard.

Budget Guard Backup

6. 4PCS 080016005704 Blade Guard Assembly

4 PackBulk Packed

Four guards in one box — spare coverage for a shop that keeps cracking its cover

Here is the value angle on guard replacements: this listing ships a 4-pack of blade guard assemblies carrying part number 080016005704 for the Ryobi 10″ miter saw models TSS102L and TS1345L. The parts are new and bulk packed, and each assembly weighs 0.5 kg. If you’ve cracked a guard before — and plenty of shops have — having a spare on the shelf means a downed saw costs you minutes, not a shipping wait.

Quality comes through as the strongest point, with the guards described as a solid replacement for the original. The fit, though, is more of a mixed report — some buyers get a perfect match and others find it doesn’t line up with their particular saw. That split is the honest reason to double-check your model number before you order rather than assuming the part number settles it.

So who is this for? The careful owner who confirms TSS102L or TS1345L against the data plate and wants more than one guard on hand. If you want the surest single fit, the genuine OEM guard is the safer one-piece purchase — this is the multi-pack play.

The value play: 4 assemblies for less than you’d expect means backup guards on the shelf, not a single replacement.

Fit is the question: quality reads positive, but fit is reported mixed — verify your model number first.

Buy it if: you’ve confirmed a TSS102L or TS1345L and want spare guards for a busy shop.

Skip if: you want the tightest possible fit with zero guesswork — go genuine OEM instead.

12-Inch Pick

7. 089240023710 Blade Guard Ryobi 12″

Transparent CoverFits TSS121 Family

For the 12-inch Ryobi crowd — a clear guard that lets you watch the blade bite

Owners of the Ryobi 12-inch TSS121, TSS121T, and TSS120L saws get left out of a lot of guard listings, so this one matters. It is a miter saw blade guard replacement that covers part numbers 089240023710, 089041016704, and 089240023707, cut for the 12-inch saw family. The build is plastics with a white and black finish.

The clear protective cover is the functional highlight. You can see the blade working through the material while the shield blocks flying debris and keeps hands away from the blade. It also helps damp some of the vibration, which steadies the cut and makes for a more controlled pass. Installation is straightforward enough that you can pull it for maintenance and refit it quickly, and the wear-resistant material is built to cut down on how often you repeat the job.

The thing to watch is material. This is a plastics guard — it does the safety job, but it is not the heavy-duty iron-and-PC construction you get on some other 10-inch guards. For a 12-inch saw doing trim and framing work, it’s a sensible, quick replacement piece.

Reasons It Fits The Job

  • Covers the 12-inch TSS121, TSS121T, and TSS120L saw models
  • Transparent shield keeps the blade visible while blocking debris
  • Quick on-and-off for maintenance and adjustments

What To Weigh

  • Plastics construction, not the heavier metal-reinforced build of other guards
  • Built for the 12-inch family — will not fit the 10-inch saws

Best for: a 12-inch Ryobi owner replacing a cracked or worn guard who wants a clear sightline on the cut.

Consider the alternative if: you run a 10-inch saw — this guard is cut for the 12-inch models only.

Rugged Build

8. Lower Blade Guard Ryobi TSS102L

PC + Iron + TPUClear Shield

A guard built like armor — polycarbonate, iron, and TPU where the plastic copies cut corners

Most aftermarket guards are a single molded shell; this one layers its materials. It combines PC (polycarbonate, the tough clear plastic used for impact-resistant panels), iron, and TPU 90° (a flexible rubbery material that grips and absorbs shock). The result is a lower blade guard for the Ryobi TSS102L and TS1345L 10″ saws that is built to shrug off the knocks of regular shop duty rather than crack at the first bump.

The TPU 90° element is the detail worth noticing. It seats the guard snugly and soaks up vibration, which keeps the saw steadier through the cut. Up top, a clear PP shield (polypropylene — a see-through, debris-proof cover) keeps the blade visible while deflecting chips and blocking accidental contact. It weighs 1.1 pounds.

Installation and upkeep are the practical side: the modular design pulls off for cleaning and inspection without a fight, and the wear-resistant materials resist corrosion so you’re not swapping it every season. It is a replacement for Ryobi part 080016005704, so confirm your saw is a 10-inch TSS102L or TS1345L before you commit.

Build story: PC, iron, and TPU 90° stacked together make this the sturdier-feeling guard option for 10-inch Ryobi saws.

Where to check: it replaces 080016005704 for the TSS102L and TS1345L only — not the 12-inch models.

Pick this if: you want a vibration-damping, impact-resistant guard for a TSS102L or TS1345L and don’t mind the extra weight.

Look elsewhere if: you run either of the 12-inch Ryobi saws.

Genuine OEM 12-Inch

9. Blade Guard Ryobi TSS121

Genuine RyobiFits TSS121 Family

The genuine article for 12-inch Ryobi saws — OEM guard, OEM part number, OEM fit

For 12-inch Ryobi owners who want zero doubt, this is the genuine Ryobi 089240023710 lower guard assembly, built for the TSS120L, TSS121, and TSS121T models. It carries the real Ryobi part number and ships as a single, 1.5-pound silver guard. When the question is “will it fit,” genuine OEM is the answer that removes the guessing.

Fit is exactly where this one shines — a factory part going onto the saw it was made for. The guard installs cleanly, and the reason people reach for it is simple: it puts the protective cover back where it belongs. The functionality also gets its due, with owners calling out that it keeps the saw safer by guarding the blade as it should. It is the piece you trust when a downed 12-inch saw needs to come back online properly.

Weigh the two 12-inch options against each other. The aftermarket Fennoral guard uses a plastics build and covers the same 12-inch family, while this genuine guard lands as the heavier 1.5-pound OEM (original equipment manufacturer) piece. If OEM confidence is the priority for a safety component, that is the trade you’re making.

OEM certainty: genuine Ryobi part 089240023710 for the TSS120L, TSS121, and TSS121T drops on with factory fit.

Straight comparison: the Fennoral guard is the lighter plastics option for the same 12-inch saws — this one is the heavier genuine piece.

The safe buy: a 12-inch Ryobi owner who wants the exact OEM guard and will not settle for a lookalike.

Consider the copy if: you want the lighter plastics guard and don’t need the genuine part number.

Know the Specs

Part Number And Model Fit

The part number is the single spec that decides whether a replacement works. A guard keyed to 080016005704 is built for the 10-inch TSS102L and TS1345L, while one keyed to 089240023710 belongs to the 12-inch TSS121, TSS121T, and TSS120L family. Before you order, find the model number on your saw’s data plate and match it to the part — not the photo. This is the difference between a five-minute fix and a return.

OEM Versus Aftermarket Materials

Genuine OEM parts carry the Ryobi part number and match the factory fit. Aftermarket guards come in different builds — some are plastics, like the Fennoral 12-inch guard, while others layer PC (polycarbonate, a tough impact-resistant plastic), iron, and TPU 90° (a shock-absorbing rubber) for a sturdier feel. On a moving safety part, closer factory fit generally matters more than a slightly lower sticker. On wear items like carbon motor brushes, a multi-pack aftermarket set makes real sense.

Common Questions

How do I know which blade guard fits my Ryobi miter saw?
Find your saw’s model number on the data plate and match it to the guard’s part number. The 080016005704 guard fits the 10-inch TSS102L and TS1345L, while the 089240023710 guard is for the 12-inch TSS121, TSS121T, and TSS120L. A guard built for one family will not bolt onto the other.
What are carbon motor brushes and when do I replace them?
Carbon motor brushes are the sliding contacts that carry current into the motor’s spinning commutator. They wear down over time. When a saw starts sparking heavily or losing power, fresh brushes are the routine wear-item fix — the 8 Pack 089006017092 set fits the Ryobi TS1344 and TS1345 saws.
Will the 4-pack blade guard assembly fit a 12-inch Ryobi saw?
No. The 4PCS 080016005704 pack is built for the 10-inch TSS102L and TS1345L models. For a 12-inch TSS121, TSS121T, or TSS120L, you want the 089240023710 guard instead.
Is a genuine OEM guard better than an aftermarket copy?
On a moving safety part, factory fit is the priority. The genuine Ryobi 089240023710 guard matches the saw it was made for. Aftermarket guards like the Fennoral or the PC-and-iron Goldenpeak piece can work well, but fit can vary more, so confirm your model number and expect to check the seating when it arrives.
What does a zero clearance insert actually do?
It closes the gap in the throat plate around the blade so the blade stays supported right up against your material. That reduces tear-out and splintering on softwood, hardwood, and veneer, and it helps stop small offcuts from dropping through the slot toward the blade. The Carve Tech insert is cut for the 10-inch TSS103.
Can I replace the lower blade guard myself?
In most cases yes. The guards here are designed to install and remove for maintenance and adjustments. Unplug the saw first, then swap the guard. If your original guard’s return spring or linkage is damaged beyond the guard itself, inspect the rest before fitting the new piece.
Why does the same part number show up on more than one listing?
Because multiple sellers offer replacements for the same Ryobi part. The 080016005704 guard appears as a single genuine OEM piece and as a 4-pack from a different maker, and the 089240023710 guard appears as a genuine OEM and as an aftermarket plastics version. Compare build, count, and fit reports, not just the number.
How many motor brushes come in one pack and should I buy spares?
The 089006017092 kit ships 8 carbon steel brushes. Since brushes are a consumable that wear down over time, an 8 Count pack gives you spares for future servicing rather than a single replacement. If your saw only needs one pair now, you’ll still have the rest on hand.
Does a transparent blade guard affect visibility or safety?
A clear cover lets you watch the blade cut while still shielding against flying debris and accidental contact. The Fennoral 12-inch guard uses a transparent protective cover, and the Goldenpeak 10-inch guard uses a clear PP shield. Both aim to keep the blade visible without giving up the safety function.
What is the foot end cap pack for and does it fit the saw?
The Ryobi A18MS01 foot end cap set is for the A18MS01 miter stand, not the saw. It restores the four caps that keep the stand level. You get 4 Count of 22.68 g caps under part number 0000220201. If a leg wobbles or a foot went missing in a move, this is the fix.

The Bottom Line

For most people hunting through ryobi miter saw replacement parts, the cleanest fix is the 080016005717 Handle Assembly — it brings a TSS102L downed by a snapped grip straight back to the bench, and it holds the highest score of the whole group at 4.5+ stars across 150+ ratings. If your lower guard is the problem and you run a 10-inch saw, the genuine Ryobi 080016005704 Lower Blade Guard is the safest one-piece purchase; want spares for a busy shop instead, and the 4PCS blade guard assembly gives you four. For a 12-inch saw, the genuine 089240023710 guard removes any doubt about fit, and buyers rate that family of guards strongly. One nudge before you click: match the part number on your saw’s data plate to the listing first, because the right part number is what turns a return into a repair.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top