9 Best Truck Hitch Receiver | Skip The Drill, Not The Payload

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

The hardest part of buying a hitch is not the hitch — it is matching the receiver to your exact vehicle year and frame. A receiver is a vehicle-specific steel bracket, and the wrong one means holes that miss the frame by half an inch. This guide sorts the practical picks by what they actually bolt onto and how much they are rated to pull, so you can match your truck or SUV on the first try.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Every pick below names its exact vehicle years, its class, and its tow rating, because those three facts decide whether the box on your porch is useful or return shipping. Here is how the best truck hitch receiver options stack up once fitment stops being a gamble.

Top Picks

CURT 13392 Class 3 Trailer Hitch, 2' Receiver, Fits 2007-2018 Jeep Wrangler JK, 2018-2026 Wrangler JL
Best OverallCURT 13392 Class 3 Trailer Hitch4.5+★850+ ratingsThe Wrangler hitch that hides its own steel so your rear end still looks factory. For a Jeep owner, this is the pick that covers two generations in one box.Check price on Amazon
KUAFU Class 3 Trailer Hitch Receiver Compatible with 2006-2018 RAV4 2 Inch
Heaviest Tongue RatingKUAFU Class 3 Trailer Hitch RAV44.0+★100+ ratingsA crossover hitch with a tongue rating that punches well above its vehicle class. Here is the number that makes this KUAFU worth a look: 675 lb of tongue weight.Check price on Amazon
KUAFU Class 3 Trailer Hitch Compatible with 1999-2013 Silverado
Big Truck MuscleKUAFU Class 3 Trailer Hitch Silverado4.0+★100+ ratingsBuilt for the half-ton that actually hauls — 6,000 lb on the ball and 10,500 lb with bars. This hitch gives you the pulling headroom for a car hauler, a loaded utility trailer, or a horse trailer behind a Silverado.Check price on Amazon

How To Choose The Best Truck Hitch Receiver

You are buying two things at once: a steel bracket that must bolt to your specific frame, and a tow rating that must cover what you plan to pull. Get the vehicle match right and the tow ratings are just numbers to compare. Get it wrong and a 10,500 lb rating means nothing if the bolt holes miss your frame.

Match the vehicle years before anything else

A hitch is drilled and bent for one vehicle platform. The CURT 13392, for example, covers 2007-2018 Jeep Wrangler JK and 2018-2026 Wrangler JL — two different generations. If your truck is outside the listed years, the mounting holes will not line up no matter how carefully you measure.

Tongue weight is the number that bites

Gross trailer weight is the total load rolling behind you; tongue weight is the downward push on the ball. A camper or a loaded cargo trailer can hit the tongue limit long before the trailer-weight limit. Compare both against your actual trailer, not the brochure for your truck.

Weight distribution is a separate rating

A weight distribution hitch spreads load across the frame instead of hanging it off the rear. Hitches like the APS model list a distinct weight-distribution figure alongside the standard carrying number, and that second figure is what applies once you add the bars.

Check the box for hardware

Most of these ship with bolts and instructions, but hardware is the single most common gap reported across this category. Open the box and count the fasteners against the parts list before you crawl under the vehicle.

Side-by-Side Comparison

Model Best For Gross Trailer Weight Tongue Weight Vehicle Fit Amazon
CURT 13392★ Best Overall Jeep Wrangler owners who want a clean factory look 5,000 lb 500 lb 2007-2018 Wrangler JK, 2018-2026 Wrangler JL Amazon
KUAFU RAV4 HitchHeaviest Tongue Rating Older RAV4s that need maximum tongue weight 4,500 lb 675 lb 2006-2018 Toyota RAV4 Amazon
KUAFU Silverado HitchBig Truck Muscle Full-size truck owners hauling heavy trailers 6,000 lb 900/1050 lb 1999-2013 Silverado 1500, Sierra 1500 Amazon
VEVOR RAV4 Hitch Recent RAV4 owners who install alone 6,000 lb — 2020-2024 Toyota RAV4 Amazon
APS Hitch Receiver Silverado and Sierra owners wanting long-term rust cover 6,000 lb 600 lb 1999-2013 Sierra 1500, Silverado 1500 Amazon
CURT 13397 CR-V owners hauling a small trailer or bike rack 3,500 lb 525 lb 2017-2026 Honda CR-V Amazon
Draw-Tite 75282 Frontier owners who keep a truck for a decade 5,000 lb — 2005-2026 Nissan Frontier, 2009-2012 Equator Amazon
CURT 13460 Highlander Highlander owners towing a boat or camper 6,000 lb 900 lb Select Toyota Highlander Amazon

Detailed Reviews

★ Best Overall

1. CURT 13392 Class 3 Trailer Hitch

Our pick — 4.5+★ from 850+ verified ratings; the strongest balance of quality and price.

Concealed Main BodyDual-Coat Finish

The Wrangler hitch that hides its own steel so your rear end still looks factory.

For a Jeep owner, this is the pick that covers two generations in one box. The 13392 fits the 2007-2018 Wrangler JK and the 2018-2026 Wrangler JL, which means you are not squinting at year ranges hoping yours lands inside. It carries a Class 3 rating of 5,000 lb gross trailer weight and 500 lb tongue weight — enough for a small camper, a utility trailer, or a hitch-mounted bike rack.

What wins people over is how cleanly it goes on, and this is a hitch the crowd has clearly put to work — 4.5+ stars across 900+ ratings. The installation is the most-praised part of the whole package, followed closely by the build itself. The concealed main body tucks the steel up behind the bumper for an OE look, and the carbon steel wears a gloss powder coat over an A-coat base. Owners describe that finish as hard and glossy, which matters when the rear of a Jeep lives in mud and road salt.

The catch is alignment — that is the one recurring gripe. Some Wrangler frames take the holes cleanly and others need a little persuasion, so plan on a second set of hands and a file rather than assuming a five-minute bolt-up. It is also rated for a weight distribution setup at 400 lb tongue weight, so if you add bars, that lower number governs. Compare that 500 lb standard figure to the KUAFU RAV4 unit’s 675 lb and you can see this one is tuned for the Jeep’s own towing ceiling, not for the heaviest trailer on the lot.

What earns it first place

  • Covers both the JK and JL Wrangler generations in a single part number
  • Concealed body keeps the receiver tucked out of sight under the bumper
  • 5,000 lb gross trailer weight and 500 lb tongue weight for real trailer duty
  • Dual-coat finish — A-coat plus gloss powder coat — for road salt and mud

What to plan around

  • Frame hole alignment is the most common complaint on this fitment
  • Weight distribution drops the tongue rating to 400 lb
  • You will want a helper for the lift into place

Go with this one: Jeep Wrangler owners who want a bolt-on receiver that leaves the rear looking untouched.

Measure first: the fit is vehicle-specific — check your exact model year against the JK and JL ranges before ordering.

Heaviest Tongue Rating

2. KUAFU Class 3 Trailer Hitch RAV4

675 lb Tongue WeightPowder Coated Steel

A crossover hitch with a tongue rating that punches well above its vehicle class.

Here is the number that makes this KUAFU worth a look: 675 lb of tongue weight. That is the downward push the receiver is rated to carry on the ball, and it compares to the 350 lb on the CURT 13392 — nearly double. The gross trailer weight sits at 4,500 lb, and both figures hold whether you tow on a plain ball mount or add weight distribution bars.

It bolts to the 2006-2018 Toyota RAV4 with no drilling and no welding, and it comes with the mounting hardware and instructions in the box. Owners consistently describe the install as roughly a half-hour job, and the quality and fit are the next things they call out. The professional steel is powder coated black to seal out air and moisture, which is the same idea every good receiver uses to keep rust off the welds.

Now the honest part. The bolt hardware is where this one draws complaints — the supplied fasteners have fitment issues for some buyers, and durability feedback is split. Check the bolts against your frame mounts before you commit, and swap in graded hardware if something feels loose. On paper this hauling figure beats the CURT 13392’s 350 lb tongue rating comfortably, but the CURT has a far deeper track record behind it.

Where it shines: a 675 lb tongue rating and a 4,500 lb gross trailer weight on a no-drill, no-weld bracket for older RAV4s.

Where to be careful: the included bolts are the weak link for some buyers, so verify them before the install rather than after.

Reach for it if: you own a 2006-2018 RAV4 and want the highest tongue capacity in this group.

Look elsewhere if: you would rather pay for a longer-proven name and do not need the extra downward capacity.

Big Truck Muscle

3. KUAFU Class 3 Trailer Hitch Silverado

9,000 lb Towing10,500 lb With Distribution

Built for the half-ton that actually hauls — 6,000 lb on the ball and 10,500 lb with bars.

This hitch gives you the pulling headroom for a car hauler, a loaded utility trailer, or a horse trailer behind a Silverado. Max gross trailer weight (the most the loaded trailer can weigh) is 6,000 lb, and with a weight distribution setup (a bar system that spreads the load across both vehicles) that climbs to 10,500 lb. Max tongue weight (the downward push on the ball) is listed at 900/1050 lb depending on setup. That 6,000 lb gross figure matches what the APS and VEVOR units quote for a different vehicle.

Fitment spans a wide slice of GM half-ton history: 1999-2013 Chevrolet Silverado 1500, 2001-2007 Silverado 1500HD, 1999-2004 Silverado 2500, and the matching GMC Sierra 1500, 1500 HD, and 2500 years. It is built as a replacement for part 44563, so if you are swapping out a tired factory receiver, the cross-reference is right there. Heavy-duty steel with a black powder coat resists rust, and the standard 2-inch receiver tube takes ball mounts, bike racks, and cargo carriers.

The honest note: it is a bolt-on job with no modification required, but the maker recommends professional installation, and that is fair advice for a bracket this heavy on a full-size frame. This is a physical install with real leverage involved, not a bench job. What lands well is the construction and the ease of getting it mounted, with owners reporting it pulled a 24ft trailer without issues.

The hauling case: 6,000 lb standard and 10,500 lb distributed — genuine full-size towing capacity for 1999-2013 Silverado and Sierra owners.

The realistic caveat: the maker points you toward professional installation, and for once that is not just boilerplate.

Best matched to: half-ton GM owners whose trailers are heavy enough that 6,000 lb is the limiting wall.

Better left to a shop: if you are not comfortable maneuvering a heavy steel bracket under a full-size frame, book the install.

Easiest Solo Install

4. VEVOR Class 3 Trailer Hitch

3-Piece Split DesignQ345B Steel

A hitch that arrives in three pieces so you never wrestle 39 pounds of steel overhead.

The split design is the whole idea here. Instead of one heavy welded bracket, the VEVOR ships as three sections you mount one wing at a time, then lock together with high-strength bolts. You handle a lighter wing at each stage, but the assembled receiver still weighs 39.2 pounds. Rated at 6,000 lb towing capacity for the 2020-2024 Toyota RAV4.

The material is Q345B steel, a structural grade, finished with a coat the maker lists as wear-resistant, rustproof, and UV-resistant. Hole spacing is drilled to match the RAV4 undercarriage. The bolt kit is unusually complete for this category: M12-1.25 hex bolts, anti-slip washers, M12*30 bolts, M12 flange nuts, M12 flat washers, and a manual all come in the box.

Two things to weigh. First, at 39.2 pounds it is the heaviest receiver in this lineup by a wide margin — lifting it into place under the car is the hard part, so plan on a floor jack or a second person to help position it. Second, the design assumes the split reassembles rigidly, and buyers report the sturdiness and ease of install are what satisfy them. Just do not expect to cinch the bolts finger-tight and call it done — the strength claim lives in the final torque.

The install angle: three separate wings mean no single 39.2 lb lift, and the complete bolt kit plus manual means fewer trips to the hardware store.

The physical reality: heavy steel is heavy steel — the finished bracket still wants a jack or a helper to hold while you thread the first bolts.

Suits you if: you drive a 2020-2024 RAV4 and want to do the job alone with the pieces broken down.

Give it a pass if: you would rather have one solid welded bracket and a helper on hand anyway.

Triple-Layer Rust Guard

5. APS Trailer Hitch Receiver

E-Coated Inside and Out3-Year Warranty

The rust-obsessed pick for a Silverado that lives through salt-belt winters.

Three layers of protection separate this APS from the other GM-fit hitches. The steel is pre-treated, then E-coated inside and out, then finished in black powder coat. That inside coating is the detail that matters — most receivers only protect the surface you can see, while the interior of the tube is where water sits and rust starts. For a truck parked outdoors through salt-belt winters, that interior coating is worth noticing.

The towing numbers are stout: 6,000 lb weight carrying, 600 lb tongue weight, 10,000 lb with weight distribution, and 1,000 lb tongue weight when distributed. It is custom-designed for 1999-2013 GMC Sierra 1500 and Chevrolet Silverado 1500, and the install is a straightforward bolt-on with no drilling. V5 and SAE J684 testing is listed, along with a limited 3-year warranty — the only multi-year coverage in this group.

Alignment is the honest complaint. The mounting holes do not line up perfectly on every truck, and several buyers found the fastener set short of complete. It is 36.3 pounds of carbon steel, so a second pair of hands helps with the alignment anyway. The free rubber hitch cover in the box is a small touch that saves you buying one. The CURT 13392 edges it on overall owner satisfaction, but on corrosion coverage this one goes further.

what separates it: It fights rust better than anything else here, with E-coating (an electrically applied anti-rust coating) inside and out plus powder coat, backed by a 3-year limited warranty — the deepest rust protection and longest warranty in this lineup.

What to check: hole alignment can run off on some trucks, and the fastener kit has come up short for others, so test-fit before you tighten anything.

Worth it for: Silverado and Sierra owners in wet or salted climates who want protection inside the tube, not just on the outside.

Think twice if: you want the simplest possible alignment — this one appreciates a patient helper.

Factory-Look Fit

6. CURT 13397 Class 3 Trailer Hitch, 2″ Receiver for Honda CR-V

525 lb Tongue WeightDual-Coat Finish

A crossover receiver that tucks under the bumper and looks like it came from Honda.

For a 2017-2026 Honda CR-V, this is the factory-fit option — and it shows. The crossbar hides behind the fascia, so from behind the car you mostly see a receiver tube and nothing else. That clean look is the most-praised quality in the reviews, and it is the sort of thing you cannot add later: either the hitch is designed to tuck or it is not.

The rating is 3,500 lb gross trailer weight and 525 lb tongue weight, limited to the lowest-rated towing component on your vehicle — so check your CR-V’s own limit before assuming the hitch is the bottleneck. The dual-coat finish is the same A-coat plus powder coat system CURT uses across its line, co-cured to resist rust, chipping, and UV fade. The 2-inch by 2-inch receiver takes standard ball mounts.

Two practical warnings. One, this fitment requires fascia and undercar trim work, so it is not a pure bolt-on. Two, it may affect the hands-free liftgate on some models — if your CR-V has a kick sensor, verify it still works after the install. The receiver also does not work with vertical-hanging bike racks, so if that is your plan, this is not the hitch.

The look and the fit: a concealed crossbar gives a factory appearance, and the 525 lb tongue rating gives you real capacity for a small trailer.

The fine print: trim work is required, the hands-free liftgate can be affected, and vertical-hanging bike racks are off the table.

Choose it if: you want a CR-V hitch that disappears behind the bumper and handles a small trailer or a standard bike rack.

Rule it out if: your bike rack hangs vertically, or you are not prepared to trim the fascia.

Longest Vehicle Run

7. Draw-Tite 75282 Class 3 Trailer Hitch

All-Welded SteelFatigue and Stress Tested

One part number that covers the Frontier from 2005 all the way to 2026.

Fitment breadth is the argument for this one. The 75282 spans 2005-2026 Nissan Frontier and 2009-2012 Suzuki Equator — two decades of one truck platform in a single receiver. If you keep a Frontier for a long time, that is a bracket you will not need to replace when you trade within the model run. Rated at 5,000 lb towing capacity, with a 2-inch square receiver and 19 pounds of alloy steel.

The build is solid, all-welded steel, and the maker runs each hitch through fatigue and stress testing. It meets and exceeds V-5 and SAE J684 standards, and the two-part black powder coat handles rust and corrosion. Owners describe it as well-built and easy to install, with the fit and the clean appearance rounding out the praise. One comment that sticks: the owner expects it to outlast the truck. For a receiver you bolt on once and keep for the life of the truck, that is the right standard.

The honest snag is alignment. Holes are off by about half an inch for some Frontier owners, while others say it lines up perfectly — the difference traces back to frame variation between years and trims. The included hardware also gets mixed feedback, so confirm the bolts against the parts list on arrival. Build quality is this hitch’s strength: it leads the praise here by a clear margin.

Why it makes the cut: 2005-2026 Frontier coverage, all-welded steel, V-5 and SAE J684 tested, and a build owners expect to stick around.

The known snag: alignment can run off by around half an inch on some trucks, and the hardware gets mixed feedback — test the fit before you torque anything down.

Picks itself for: Frontier owners who want one durable receiver to cover the whole model run.

Hands off if: you are not prepared to deal with possible hole misalignment between frame variations.

Highest Owner Rating

8. Class 3 Trailer Hitch Highlander

900 lb Tongue Weight6,000 lb Towing

The most satisfying hitch in this lineup, and the one with the deepest tongue rating of them all.

Look at the tongue figure on this Highlander receiver: 900 lb. That is the highest standard tongue rating in this entire group, paired with 6,000 lb gross trailer weight. With weight distribution it also holds 900 lb tongue weight. If your camper or boat trailer pushes substantial weight down on the ball, this is the bracket with the most headroom for it.

The build reads like the rest of the CURT line — carbon steel, gloss powder coat, a vehicle-specific design for a custom fit, and SAE J684 safety testing. Installation is the strongest theme among owners, helped by instructions that are easier to follow in the online version than the printed sheet. That is worth knowing before you unfold the printed instructions in your driveway. The fit gets the same praise, with the hitch sitting neatly under the bumper rather than hanging below it.

Two caveats. It fits select Highlander model years only, not every generation of the SUV, so check your year against the listing before ordering. And 900 lb of tongue capacity is only usable if your Highlander is rated to pull that much — your vehicle’s own limit is the ceiling, not the hitch. This one also carries the highest rating in the group at 4.5+, though the pool of buyers behind that number is smaller than the Wrangler and CR-V hitches, so read it as a strong early signal rather than a long track record.

The standout spec: 900 lb tongue weight — the most downward capacity here — with 6,000 lb gross trailer weight and weight distribution compatibility up to the same 900 lb.

The check before you buy: confirm your Highlander’s model year is covered and that the vehicle’s own towing limit supports the tongue weight.

Built for: select Highlander owners towing a boat or camper who need maximum downward tongue capacity.

Look elsewhere if: your Highlander’s year is not on the fit list — check that first, before anything else.

Know the Specs

Gross Trailer Weight (GTW)

The total weight of everything rolling behind the ball — trailer plus cargo. It is the big number on the box, and it is usually the one buyers fixate on. A 6,000 lb rating, like the ones on the KUAFU Silverado, APS, VEVOR, and Highlander hitches, means the receiver is rated for a trailer up to that total. The hitch’s rating is only half the equation; your vehicle’s own towing limit is the other half, and the lower of the two wins.

Tongue Weight (TW)

The downward push the trailer puts on the ball, roughly the weight stacked around the front of the trailer. This is the number that catches people out, because it fills up faster than trailer weight. A 500 lb tongue rating and a 900 lb rating are very different tools — the Draw-Tite runs 5,000 lb towing, while the Highlander hitch runs 6,000 lb with 900 lb of tongue capacity. Check both against your loaded trailer, not the empty one.

Weight Distribution (WD)

A setup with spring bars that shares load between the trailer and the front axle of the tow vehicle. It gets its own rating line because the bars change how much load the receiver takes. The KUAFU Silverado hitch lists 10,500 lb with weight distribution against 6,000 lb standard. A hitch rated for WD is not required to tow, but it is what lets you push toward the heavier end of your vehicle’s capacity.

Receiver Size and Class

The receiver is the square tube at the back, and its size decides which accessories fit. All the picks here are Class 3 with a 2-inch receiver, which is the standard for ball mounts, cargo carriers, and most bike racks. Class 3 hitches are commonly used for light trailers, pop-up campers, and utility hauling. Look for a 2-inch by 2-inch square opening, and match your accessories to it.

Finish and Corrosion

Hitches live under the vehicle where water and salt collect. Powder coat protects the surface; the finish underneath does the deeper work. The CURT picks use a dual-coat system of liquid A-coat plus black powder coat, co-cured together. The APS hitch adds E-coating inside and out, which protects the interior of the tube. The VEVOR unit is rated rustproof and UV-resistant over Q345B steel.

Mounting Hardware and Fit

A vehicle-specific hitch is designed to bolt to your model’s frame using its existing holes. Universal hitches often require drilling. Even with a vehicle-specific design, alignment can vary between model years and trims. Hardware in the box is the wildcard — check the supplied bolts against the parts list on delivery, and have graded replacements on hand if something is missing or undersized.

Common Questions

How do I confirm a hitch receiver fits my exact truck year?
Match the listed model years and trims against your vehicle’s VIN, not the badge on the tailgate. The CURT 13392 covers the 2007-2018 Wrangler JK and the 2018-2026 Wrangler JL as two separate ranges, and the Draw-Tite 75282 covers 2005-2026 Frontier plus 2009-2012 Equator. If your year falls outside the range in the listing, the frame holes will not line up.
What is the difference between tongue weight and gross trailer weight?
Gross trailer weight is the total mass of the trailer and its cargo. Tongue weight is how much of that mass pushes down on the hitch ball. Tongue weight is usually the tighter limit, so check it against your loaded trailer. The CURT 13493 for the Bronco is rated at 3,500 lb gross with 350 lb tongue weight, while the Highlander hitch runs 6,000 lb gross with 900 lb tongue weight.
Do these hitches work with a weight distribution setup?
Several do, and the distribution rating is listed separately because the bars change the load on the receiver. The KUAFU Silverado hitch runs 6,000 lb standard and 10,500 lb with weight distribution. The APS hitch lists 6,000 lb carrying, 10,000 lb distributed, and 1,000 lb tongue weight when distributed. The CURT 13392 lists 400 lb tongue weight under distribution.
Will a 2-inch receiver work with my bike rack or cargo carrier?
A 2-inch receiver is the standard size for most ball mounts, cargo carriers, and bike racks. One thing to verify: the CURT 13397 for the CR-V is not compatible with vertical-hanging bike racks, where the bikes hang from their frame rather than sitting on trays. If you use one of those, choose a different hitch or a different rack.
Can I install a hitch receiver without professional help?
Most of these are bolt-on jobs designed to use your vehicle’s existing frame holes, so a home install is realistic with basic hand tools. The heavier units — the VEVOR at 39.2 pounds, the APS at 36.3 pounds — are easier with a floor jack or a second person to hold the bracket. The KUAFU Silverado hitch’s maker recommends professional installation, and for a bracket that heavy on a full-size frame, that is fair.
What does the hitch class actually change?
Class determines the receiver size and the rating ceiling. Everything in this group is Class 3 with a 2-inch receiver, which is the common choice for light trailers, pop-up campers, and utility hauling. A Class 3 hitch generally uses a 2-inch square tube; the rating still varies by vehicle. The Draw-Tite 75282 is Class 3 at 5,000 lb, while the KUAFU Silverado unit is Class 3 at 6,000 lb standard.
How do I keep the hitch from rusting underneath the truck?
Look at the finish system, not just the color. Powder coat protects the visible surface. The APS hitch adds E-coating inside and out, which protects the interior of the receiver tube where water collects. The CURT line uses liquid A-coat under powder coat, co-cured together. The VEVOR unit lists rustproof and UV-resistant coatings over Q345B steel.
What should I do if the mounting holes do not line up?
First, confirm you have the correct part for your model year and trim — alignment complaints often trace back to a fitment mismatch. If the part is right, check the frame for debris or a bent mount and try threading the bolts loosely before tightening any of them. The CURT 13392 and Draw-Tite 75282 both have alignment quirks on certain model years, so start all bolts by hand before you torque anything.
Does the hitch affect the hands-free liftgate on a CR-V?
It can. The CURT 13397 for the 2017-2026 CR-V is noted to possibly affect the hands-free liftgate, so test the kick sensor after installation. That install also requires fascia and undercar trim work, which is different from a pure bolt-on. If your CR-V has the hands-free feature and you rely on it, plan to verify it once the hitch is on.
Is a custom-fit hitch better than a universal one?
For a truck or SUV, a vehicle-specific design is usually the better path. These hitches are built for exact model years — the CURT 13493 for 2021-2026 Broncos without a factory receiver, the KUAFU RAV4 hitch for 2006-2018 RAV4s — so they bolt to existing holes without drilling. Universal hitches can require modification and may not match your frame’s hole pattern.

The Bottom Line

For most Wrangler owners, the CURT 13392 is the right receiver: it covers both the JK and JL generations, hides its crossbar behind the bumper, and holds a 5,000 lb gross trailer weight with 500 lb tongue weight — the crowd favorite at 4.5+ stars across 900+ ratings. If your trailer loads up the ball, the Highlander hitch carries 900 lb of tongue weight, and the KUAFU Silverado unit reaches 10,500 lb with weight distribution. And if you are installing alone, the VEVOR split-design receiver breaks the job into three lighter lifts. Whichever you choose, check your vehicle’s model year against the fit list before you order, and count the hardware on arrival.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top