Weber Genesis II Parts Compatibility: Which Parts Fit Which Models? | Fit By Model

Weber Genesis II parts are not universally interchangeable. Fit depends on the grill’s series, generation, control layout, fuel type, and exact model number.

A cooking grate that fits one Genesis II can be an inch too wide for the next. Four details decide whether a replacement part works — series, generation, control layout, and fuel type — plus the model and serial number on the data label at the rear-right of the frame. Treat Weber Genesis II parts compatibility as a matter of eyeballing the old piece and you’ll be shipping grates back.

Which Genesis II Models Actually Share Parts?

Parts swap freely within a series far more often than across series. Weber publishes separate parts collections for the Genesis II 200, 300, 400, and 600 series, and keeps Genesis II LX in its own family.

  • 200 series: E-210, E-215, and E-220 models plus the related 200-series variants Weber lists beside them.
  • 300 series: E-310, E-315, E-330, E-335, S-310, S-315, S-330, S-335, EP-335, and SP-335.
  • 400 series: E-410, E-415, E-435, S-410, S-415, S-435, EP-435, and SP-435.
  • 600 series: the larger configurations, including the E/S-640.
  • Genesis II LX: E/S-240, E/S-340, and E/S-640, documented apart from standard Genesis II grills.

Fuel type splits the list again. Weber labels LP and natural-gas models separately and prints a matching parts diagram for each, so a regulator, manifold, valve, or burner assembly has to match the fuel the grill was built for. Control layout matters too: Weber’s later Genesis 300 series grills with front control knobs are treated as a different configuration from rear-control Genesis II grills.

One more split worth knowing. A part listed for “Genesis” grills doesn’t automatically fit Genesis II — the listing has to name the generation and series.

Genesis II Parts Compatibility: What Weber’s Listings Confirm

Weber’s compatibility statements are narrower than the product photos suggest. Each one covers only the component and model range it names.

Part What Weber Lists It For Where Owners Get It Wrong
Flavorizer bars Genesis II and Genesis II LX, 2017–2022; Genesis 300 series with front knobs, 2022–present Reading the listing as “all Genesis II”
200-series flavorizer bars Genesis II (2016+) 200 series only Ordering these for a 300 or 400
Cooking grates Sold as 200-series sets and as 300-series/LX sets Guessing size from burner count
Sear grates Genesis II/LX 400 and 600 series Assuming they fit a 200 or 300
Heat deflectors Some listed for Genesis II (2016+) and Genesis models Skipping the exact product listing check
Burners and manifolds Model-specific, fuel-specific diagrams Substituting a visually similar burner
Ignition, valves, control panels Matched to the exact model and fuel configuration Fitting a front-control part to a rear-control grill

A flavorizer bar shared across two families is the exception, not the rule, and that grouping never extends to grates, burners, or gas fittings. The gas replacement parts by model collection on Weber’s US site sorts parts by grill instead of by part, which is the faster cross-check.

If you’d rather line up the options first, this tested roundup of Genesis II replacement parts compares the sets owners replace most.

How Do You Confirm A Part Fits Before Ordering?

Match the part to the grill’s data label first, then match the label to Weber’s listing. Weber’s manuals put the data label on the back, right-hand side of the grill frame and tell owners to record the serial number printed there.

  1. Write down the exact model printed on the grill or in the owner manual.
  2. Record the serial number from the rear-right data label.
  3. Open that model’s exploded parts diagram in the manual.
  4. Find the component’s part number on the diagram.
  5. Confirm the replacement listing names your series, fuel type, and control layout.

The check has worked when the listing names your model family and the same part number shows up in your model’s diagram. When it doesn’t, call a local retailer — Weber’s manuals name that option alongside the website, and a counter that stocks Weber parts can pull the diagram with you. Gas components deserve the extra care: burners, valves, manifolds, and regulators should be Weber-approved parts for your fuel type, and no gas connection should ever be modified to force a fit.

Common Questions

Do Genesis II LX parts fit a standard Genesis II grill?

Not unless Weber’s listing says so. Weber documents Genesis II LX models — E/S-240, E/S-340, and E/S-640 — as a separate family, and its cooking grates are sold as 300-series/LX sets rather than as universal fits. Check the product page for your exact model name before buying an LX part for a standard Genesis II.

Can a natural gas part go on an LP grill?

No. Weber labels LP and natural-gas models separately and publishes fuel-specific parts diagrams, so regulators, manifolds, valves, and burner assemblies have to match the fuel the grill was built for. Swapping across fuel types is a safety problem, not just a fit problem — order the part listed for your grill’s own fuel configuration.

Why doesn’t a 300 series grate fit a 200 series grill?

Weber sells cooking grates as separate 200-series and 300-series/LX products, so the two aren’t the same size even when burner counts look close. Grate dimensions can’t be inferred from burner count or lid width. Use the model number and the exploded diagram instead of measuring the old grate and hoping.

Sources

Scroll to Top