Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Replacing worn parts on a Genesis II is the cheapest way to keep a grill you already love — and the wrong part is the only real risk. This guide tells you upfront that it uses flexible, human-like matching for compatible-with-Weber-Genesis-II-series-grills parts. That means not every pick here is the exact number you searched; the nearest same-type part that serves the same purpose is what we point you to. Fitment to Genesis II is stated on every single pick, so read the size line before you order. Match the bar, rack, grate or tube to your Genesis II 300’s measurements and part number, and the grill runs like new again.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Start with the part that died, not with a brand name — flavorizer bars, warming racks, grates and burner tubes each fix a different problem. Below you’ll find nine Genesis II replacement parts sorted by what they actually repair, so you can match one to your grill and get back to cooking.
Top Picks



How To Choose The Best Weber Genesis II Parts
Every pick on this page is a replacement part, not a new grill. So the whole job depends on two questions: does it fit my model, and is it the part that actually failed? Answer those two and you avoid the returns bin entirely. Get either one wrong and you are pulling your grill apart twice.
Confirm “II” before you confirm anything else
The name is the trap. A Genesis II carries a panel that reads GENESIS II, and it was built from 2017 onward. An older Genesis 300 grill reads only GENESIS, and its parts do not interchange with the second-generation 300 series. Walk out to your grill and look at the badge on the front before you order. If the badge says GENESIS II, you are shopping the right shelf.
Match the part to the symptom
Flavorizer bars are the angled steel plates sitting over the burners — when they rust through, grease drips straight onto the tubes and flares start. Cooking grates are what your food touches, so warped or flaking grates mean uneven sear marks. Burner tubes are the gas pipes themselves; a weak, uneven flame usually starts there. The failure is what tells you which part to buy.
Measure, then check the thickness
Replacement parts only drop in when the numbers line up — a warming rack, a grate set and a bar each have their own length and width to match against the original you are pulling out. Thickness matters too. A heavier bar holds its shape longer and spreads heat more evenly, while a thin one can bow under high heat. Heavy is not automatically better for every part, but for bars and grates it is a strong signal of how long the part will last.
Side-by-Side Comparison
| Model | Best For | Part Type | Key Dimension | Material | Amazon |
|---|---|---|---|---|---|
| QuliMetal Genesis II Flavorizer Bars (66795)★ Best Overall | All-around burner protection | Flavorizer bars (5-pack) | 17.2″ x 3.0″ x 2.1″ each | Porcelain-enameled, 20GA | Amazon |
| Unidanho Warming Rack (66044)Most Precise Fit | Adding warming space up top | Warming rack | 25-3/4″ x 6″ | 304 stainless steel | Amazon |
| QuliMetal Foldable Warming RackFolds Flat | Easy cleaning and storage | Warming rack (foldable) | 25.75″ x 6″ warming surface | Food-grade stainless steel | Amazon |
| WEMEIKIT 66795 GS4 Flavorizer Bars | Heavy-duty flame guards | Flavorizer bars (5-pack) | 17 1/8″ x 3″ x 2 1/8″ | 16GA porcelain-enameled steel | Amazon |
| Charbrofire Genesis II Flavorizer Bars | Even heat with thick bars | Flavorizer bars (5-pack) | 17.1″ x 3″ x 2″ | Porcelain-enameled steel | Amazon |
| Hongso Cast Iron Grill Grates (66095) | Sear marks from cast iron | Cooking grates (set of 2) | 18.75″ x 13.25″ each | Cast iron | Amazon |
| SafBbcue 67490 Burner Tube Set | Restoring a weak flame | Burner tubes (3-pack) | 19 3/4″ long each | 304 stainless steel | Amazon |
| Grill Valueparts Cast Iron Grates (66095) | Heat retention across the surface | Cooking grates (set of 2) | 13 1/4″ x 18 4/5″ each | Matte enamel cast iron | Amazon |
| PETKAO GS4 Genesis II Parts Kit | Full refresh in one box | Bars + deflectors + burner tubes | 17 1/8″ bars, 19 1/2″ burners | Porcelain-enameled + stainless steel | Amazon |
Detailed Reviews
1. QuliMetal 66795 Flavorizer Bars
Our pick — 4.5+★ from 8,000+ verified ratings; the strongest balance of quality and price.
Five porcelain-enameled bars in 20GA steel — the direct swap that puts your Genesis II back in service.
If your grill is a Genesis II 300 and the angled plates over the burners have gone flaky and rusted, this is the set to reach for first. You get five bars, each measuring 17.2″ x 3.0″ x 2.1″, and that is the full complement your grill needs — so there is no ordering twice. The part number to check against is 66795, and the fit list covers the E-310, E-315, E-335, S-310, S-335 and SE-335 along with the LX 300 models from 2017 onward.
What earns this the top spot is how the bars behave once they are hot. The porcelain-enamel coating is the shiny, glassy finish baked onto steel. Here it does two jobs: it spreads heat evenly across the bars so you stop chasing hot spots, and it stands up to the grease and heat that kill bare steel. The 20GA thickness is a measure of the steel’s gauge, and a lower gauge means a beefier plate — one that keeps its shape instead of bowing under a hot burn. At 5.59 pounds for the set, there is real metal in the box.
The one honest catch is the fit-versus-model line. These are cut for the Genesis II 300 series, so they will not drop into an older Genesis 300 whose badge reads only GENESIS. Measure and check the badge before you order. Compare a single bar’s 17.2″ length against the 25.75″ span of a warming rack and you can see these are burner-cover parts, not rack parts — they solve the grease-on-burner problem, nothing else.
What a fresh set buys you
- Five bars in one box — enough to do the whole grill in a single order
- 17.2″ x 3.0″ x 2.1″ per bar, cut for the Genesis II 300 series
- Porcelain-enamel finish spreads heat and shrugs off grease
- 20GA steel and 5.59 pounds total — the set has genuine heft
The line to read before clicking
- Built for the II badge; older Genesis 300 grills need a different part
- Bars only — grates and burner tubes are separate buys
Straight swap: the natural first buy if your Genesis II 300 needs its burner covers replaced and you want the job done in one order.
Check first: the badge has to read GENESIS II — the original Genesis 300 takes a different bar entirely.
2. Unidanho 66044 Warming Rack
A 1.5-pound stainless rack that clicks into the 66044 slot and buys you a whole shelf of cooking real estate.
Your top grate is where buns, corn and already-seared steaks go to stay warm without drying out. This rack measures 25-3/4″ x 6″ overall, with a cooking surface of 25 1/4″ x 5 1/4″, and it is the 66044 replacement for the Genesis II and II LX 300 series. Check the fit list carefully — it covers a long run of model numbers, so match yours before ordering, or failing that, measure your original rack and compare.
The build is the story here. The rods are solid 304 stainless steel, the food-grade alloy that resists rust and holds its shape — and because the rods are solid rather than hollow, the rack bears weight better. That matters when you stack a row of foil-wrapped corn on it. It also weighs only 1.5 pounds, so it lifts out with one hand when you want to get at the main grates underneath. Compare that with the 5.59-pound flavorizer bar set above and it is a different job entirely: one part covers burners, the other adds shelf space.
The main thing to get right is the length. At 25-3/4″ this piece is far wider than a 17.2″ flavorizer bar, and if you confuse the two you will have a rack that will not seat. Measure your original. This is also a warming-only part — it does not replace your main grates, so if your cooking surface is warped, look at the grate options further down this list.
The point of the part: extra upper-level room for keeping food hot, in rust-resistant solid 304 stainless that wipes clean in seconds.
Fit is what makes or breaks a warming rack, and this one is cut to the 66044 footprint for a reason. Pair it with a fresh set of flavorizer bars and you have rebuilt the top and middle layers of the grill in one afternoon.
Reach for this if: your original warming rack is gone or rattling and you want the direct 66044 size in solid stainless.
Look elsewhere if: what you actually need is a cooking grate — this adds a top shelf, it does not replace the surface your food sits on.
3. QuliMetal Warming Rack
The rack that folds in half so it fits a dishwasher and a shelf — built for people who clean their grill, not just cook on it.
The folding hinge is the whole pitch, and it is a good one. The warming surface measures 25.75″ x 6″, the same footprint as the 66044 replacement, and it seats the Genesis II 300 series gas grills — the E-310, E-315, E-330, E-335, S-310 and S-335 among them. It weighs 2.23 pounds, which is light enough to lift out with one hand and sturdy enough not to flex when you load a row of buns. The stainless is non-magnetic and corrosion-resistant, so it can take the steam and heat of repeated cooks.
What wins people over is the metal itself — the quality of the stainless comes up more than anything else in owner feedback, with fit close behind. The fold is the bonus: it collapses so the rack can go in a dishwasher, as long as your dishwasher is big enough to take the folded frame. That cleaning angle is what separates a rack you keep for years from one that rusts in the corner of the shed.
The honest trade-off is the hinge. Foldable parts add a joint that a one-piece rack does not have, and a few owners find the stability less solid than a fixed rack and the folding and assembly a little fiddly. Treat the hinge gently and it is fine. If you want maximum rigidity and never plan to fold it, either the Unidanho above or a fixed rack will suit you better. But if you want to run the rack through the dishwasher, this one earns its place.
The value read: a 25.75″ x 6″ stainless warming surface that folds for cleaning, at a budget-friendly price for a part that touches your food directly.
Match the model before you buy — the fit list is long, but the folding rack needs to sit at the right height to leave your main grates clear. Check the surface against your original and this drops in without drama.
Best for: grill owners who want a warming rack they can pull out and clean in the dishwasher instead of scrubbing by hand.
Skip if: you want the rock-solid feel of a fixed, one-piece rack and never fold anything anyway.
4. WEMEIKIT 66795 GS4 Flavorizer Bars
Heavy in the hand and heavy on the scale — these cast-steel bars are built to outlast the grill they sit in.
Here is the number that matters: each bar weighs at least 1.21 pounds, and the set of five comes in at 6.06 pounds total. That is more metal than most third-party bars carry, and it is the clearest signal that these will hold their shape through many hot cooks. The steel is 16GA, formed and shaped as solid cast steel before the porcelain enamel is baked on — the glassy coating that blocks rust and spreads heat.
Each bar runs 17 1/8″ x 3″ x 2 1/8″, with five in the pack, and the part replaces Weber 66795 and 66032. Fit is the thing owners rave about most here, with quality a close second, and the reason is simple: the dimensions match the original. Look closely and you will find two small semilunar cut-outs on each bar, angled on each side so you can see the burner flame while you cook. That window lets you read your flame without lifting a bar.
The one caution is weight, of all things. At 6.06 pounds these are noticeably heavier than the 1.5-pound warming rack a few picks up — good for the grill, but you will feel it the first time you lift the set out to clean. A bar this heavy also needs a firm seat in the frame; set it down flat and check the ends sit flush. Seat each 16GA bar flat with the ends flush in the frame and you get even heat and better searing, cook after cook.
Where it pulls ahead
- Each bar at least 1.21 pounds — real cast steel, not a thin shell
- 6.06 pounds total across the five-bar set
- Semilunar cut-outs let you check burner flames without moving a bar
- 16GA porcelain-enameled finish resists corrosion at high heat
Where it asks something of you
- The heft means a heavier lift when you pull the set for cleaning
- Cut to the Genesis II 300 / LX-340 range — check your badge first
The no-regret pick: if you want the thickest, heaviest bars in this lineup and a flame-check window built in, this is the set.
Be sure of your model: the 66795 number fits the Genesis II 300 series, not the older Genesis 300.
5. Charbrofire Genesis II Flavorizer Bars (66032 / 66795)
Solid porcelain-enameled steel, no hollow-shell trick — and it tips the scale at 6.01 pounds for five bars.
Some third-party bars wrap stainless over ordinary steel to look premium. This set goes the other way: it is solid porcelain-enameled steel through and through, baked with the glassy coating that takes the high heat without rusting through. Each bar measures 17.1″ x 3″ x 2″, five to the pack, and the set weighs 6.01 pounds — nearly as much as the heaviest set above. That weight is the tell that you are getting a dense bar rather than a thin one.
The fit list is impressively broad, and that is where this one earns trust. It covers the Genesis II 300 series from 2017 to current, plus the II LX E-340, S-340, CSE-340 and CSS-340. The part also cross-references Weber 66795, 66032, 67095 and 90235, so if your original number matches any of those, you are covered. Buyers report the fit landing well, with quality right behind it — and the bars keep the burners shielded from dripping grease, which is the whole point of the part.
Read the fine print on the model year, though. This fits the GENESIS II badge, not the older GENESIS 300 from 2007 to 2016, and that distinction catches people out. The other trade-off is the surface finish — it is dark enamel, so use non-metallic tools to keep it from scratching. That small habit adds life to the part. Use non-metallic tools on the dark enamel and these 6.01-pound bars keep their finish through years of cooks.
Why it lands well: solid enameled steel at 6.01 pounds, a broad model fit list, and a cross-reference that covers four Weber part numbers in one buy.
The heat distribution is even and the retention is strong — the bars hold warmth and pass it up to your food instead of letting it escape. For a grill that runs hot and long, that translates to fewer flare-ups and steadier cooking.
Best for: Genesis II 300 or II LX owners who want solid (not shelled) enameled bars and a long model-compatibility list.
Look elsewhere if: your grill badge reads only GENESIS — the 2007-2016 generation takes a different part.
6. Hongso 66095 66802 Grill Grates
Cast iron grates that hold heat like a skillet and throw dark sear marks across a steak.
If your food tastes flat and the sear lines look pale, the grates are usually the reason. Cast iron — a dense, heavy iron that soaks up heat and holds it — is the material that fixes that. Each grate measures 18.75″ x 13.25″, and you get two of them for a total of 18.75″ x 26.5″, giving you 509.31 square inches of cooking surface. That is a proper full-grill footprint, and two grates mean you can lift one to tend the burners while the other stays hot.
The fit list is long and it covers the 2017-and-newer Genesis II 300 series and the II LX 300 series, plus KitchenAid 720-0954 and 720-0954A models. Quality is what owners praise most here, with fit close behind, and the cast iron is the reason — it has the mass to sear hard and the durability to take years of heat. The grates also carry SGS testing, which is a third-party lab check on the material meeting the relevant standards. Set the two 18.75″ x 13.25″ grates in and the cast iron sears like the day you bought the grill.
The honest catch is the length. Grates that run about 3/8″ short of the original are a recurring note — a real mismatch, not a defect. Measure your firebox opening and compare against 18.75″ x 13.25″ per grate before you commit. And if your grill takes the 19 1/2″ size instead, the maker points you to separate part numbers. Cast iron also wants a light oil coat before each cook to keep it from sticking.
The sear payoff: 509.31 square inches of cast iron over two grates, dense enough to hold heat and lay down prominent sear marks.
Check the badge too — this fits the GENESIS II generation, not the older GENESIS 300 from 2007 to 2016. Once you have confirmed the 18.75″ x 13.25″ size and the GENESIS II badge, the grates drop in flush and the cooking surface feels new again.
Best for: cooks who want cast-iron heat retention and bold sear lines across a full 509.31-square-inch surface.
Think twice if: your grill needs the 19 1/2″ grate size — this set is the 18.75″ length and will run short.
7. 67490 Burner Tube Set
When the flame goes yellow and patchy, these three stainless tubes are the fix — one for each burner slot.
A burner tube is the metal pipe the gas flows through to the flame holes, and when it clogs or rusts, the grill cooks unevenly and never gets truly hot. This set gives you three main burner tubes, each 19 3/4″ long, in non-magnetic 304 stainless — the rust-resistant alloy that stands up to heat and moisture better than cheaper steel. The set weighs 1.96 pounds, so it slots in with no fuss.
Fit is what comes up most from owners, with quality close behind and easy installation right there too. The tubes are cut to work with both liquid propane and natural gas Genesis II setups, which matters if you have swapped fuel types. They cross-reference a long run of Weber part numbers — 67490, 67489, 67491, 66074, 66073 and more — so check yours against the list before ordering. If it matches, the swap is straightforward.
The practical caution is the one every burner job carries: confirm your grill model and the length of your original tube before you order. A tube 19 3/4″ long will not drop into a slot sized for a shorter one. Once the three 19 3/4″ 304 stainless tubes are in, a weak, uneven flame turns into a clean, even one — and the whole grill stops fighting you.
Why owners keep coming back to it
- Three main burner tubes, 19 3/4″ long each, one per slot
- 304 stainless resists corrosion and holds heat
- Works with LP and NG Genesis II setups
- Light at 1.96 pounds — an easy afternoon swap
What to sort out first
- Only main burners — no warming or side-burner tubes included
- Length must match your original; 19 3/4″ is not universal
Reach for this if: your flames are weak or uneven and you have traced it to clogged burner tubes on a Genesis II 300.
Look elsewhere if: you are replacing grates or bars instead — this set covers the gas path, not the cooking surface.
8. Grill Valueparts 66095 66802 Cast Iron Grates
Enamel-coated cast iron that keeps heat steady across the whole surface without warping under a hot lid.
Enamel on cast iron is a smart pairing: the iron gives you the heat mass, and the matte enamel coating protects it from rust and stops it sticking. Each grate measures 13 1/4″ x 18 4/5″, and the pair comes to 26 1/2″ x 18 4/5″ for a full cooking surface. Total weight is 4.99 pounds, which is manageable enough to lift a single grate with one hand when you need to get at the burners.
Heat retention is the real benefit — the enamel-coated iron holds a steady temperature across the surface and passes it into your food instead of letting it drift. That consistency means fewer hot spots and more even sears, and the coating holds up without warping or cracking the way thin bare steel tends to. The grates replace Weber 66802, 66095 and 66805, so cross-check your original number. Quality is praised most in feedback, with fit right behind it.
What to know before you buy: the gaps between the bars are wider than some owners expect. That is a real fit note rather than a fault — it will let a little more flame kiss the food, which some cooks like. If you want tight spacing for delicate fish, weigh that up. The maker also suggests coating the grates lightly with oil before first use to build a non-stick surface. Oil the matte enamel lightly before each cook and the cast iron stays non-stick and rust-free.
The heat-retention case: matte enamel cast iron at 4.99 pounds, sized to keep a consistent temperature across a 26 1/2″ x 18 4/5″ surface.
One last tip on compatibility — if your model is not listed in the fit notes, contact the seller before ordering rather than guessing. Getting the size and the coating right is what turns a set of grates into a dependable cooking surface.
Best for: cooks who want an enamel-coated cast-iron surface that holds steady heat and fights rust and sticking at once.
Weigh it up if: you need narrow gaps between the bars — this set runs wider than some, so delicate food may drop through.
9. Grill Parts for Weber GS4 Genesis II/II LX 300 (PETKAO Kit)
One box that rebuilds the whole firebox — five bars, three deflectors and three burner tubes, all matched to GS4.
This is the pick for a grill that needs more than one part. You get 5 snowflake porcelain-enameled flavorizer bars, 3 stainless steel heat deflectors and 3 stainless steel burner tubes in a single order. It weighs 9.44 pounds in total, which tells you the box has real substance. If your Genesis II is overdue for several fixes at once, buying them together beats piecing the job together part by part.
Each bar measures 17 1/8″ x 3″ x 2 1/8″, each deflector 12 1/2″ x 4 1/4″, and each burner tube 19 1/2″ long. The bars shield the tubes from dripping grease, the deflectors sit under the burners across the bottom of the firebox, and the tubes carry the gas. Fit is what owners praise most here, with quality close behind, and the compatibility list covers the GS4 Genesis II 300 and II LX 300 series from 2017 onward, plus the 2022 Genesis 300. The bars alone span the 17 1/8″ length against the 25-3/4″ span of a warming rack — these are burner-level parts, not the top shelf.
The honest limitation is the one-shot nature of a kit. It all fits or it does not, so measure your model and original parts carefully before ordering — if your grill takes the 19 1/2″ bar size instead of 17 1/8″, you want a different set. The deflectors are also a part many people forget they need, so a kit like this is a good reminder that the layers under the burners matter too. Confirm the 17 1/8″ bar length and 19 1/2″ tube length against your originals, and the whole firebox runs like new.
The value read: five bars, three heat deflectors and three burner tubes matched to GS4—the parts that wear out together, bought once.
What wins people over is the completeness — the kit covers the grease-shielding bars, the heat deflectors and the burner tubes so you are not hunting for the third part after you have already installed two. That is the kind of convenience a full refresh needs.
Best for: a Genesis II that needs its bars, deflectors and burner tubes refreshed all at once, bought in a single matched kit.
Check the size first: the bar length is 17 1/8″ — confirm against your original before you commit to the whole box.
Know the Specs
Flavorizer bar gauge and weight
The gauge is a measure of the steel’s thickness, and a lower gauge number means a thicker, heavier plate. That matters because a thick bar keeps its shape under high heat instead of bowing, and it spreads warmth more evenly across your food. Weight is the quickest way to judge a bar without a caliper: a set that tips the scale toward six pounds has more steel in it than one that feels light. Thicker bars also last longer against the grease and heat that kill thin ones.
Warming rack and grate dimensions
A warming rack and a cooking grate look similar but serve different jobs, and their dimensions tell them apart. A warming rack sits up over the main cooks with a long, narrow surface — think 25-3/4″ x 6″ — where food stays hot. A cooking grate set covers the firebox proper, so it runs in both directions, like 18.75″ x 13.25″ per grate. Match the exact length and width against your original, because a rack and a grate will not substitute for each other even if they look close in a photo.
Burner tube length and material
The burner tube is the gas pipe under the bars, and its length has to match the slot it drops into — a 19 3/4″ tube will not fit a shorter slot. Material matters too: 304 stainless is a food-grade, rust-resistant alloy that handles heat and moisture far better than plain steel, so tubes made from it tend to last longer. When the flame turns yellow or patchy, the tube is often the culprit, and a fresh stainless set restores an even blue flame.
Dial in the model year
Genesis II and Genesis 300 sound interchangeable but they are different generations. The second generation wears a GENESIS II badge and its parts are shaped for that grilling unit. The older Genesis 300 from 2007 to 2016 has a GENESIS-only badge and a different part geometry. Always confirm which badge your grill carries before you buy, because the wrong generation turns a simple swap into a return.
Common Questions
Will these parts fit a Genesis II E-310 grill?
How do I know if my grill is a Genesis II or an older Genesis?
How long do flavorizer bars usually last?
Can I replace just the flavorizer bars and not the burners?
Are cast iron grates better than stainless for searing?
What length warming rack fits a Genesis II 300 series?
Do burner tubes work with both propane and natural gas?
Can I put a folding warming rack in the dishwasher?
What should I do if a grate is slightly short of my original?
Do I need heat deflectors under the burners along with new bars?
Will a Genesis II LX 300 take the same parts as a standard Genesis II 300?
The Bottom Line
The part that fails is the part to buy, and the strongest single fix on this list is the QuliMetal Genesis II Flavorizer Bars — five 20GA porcelain-enameled bars at 17.2″ x 3.0″ x 2.1″ each, sized for the Genesis II 300 series and built to bring even heat back to a grill that has lost it. If your flames are the problem instead of your burner covers, grab the SafBbcue 67490 Burner Tube Set — three 19 3/4″ 304 stainless tubes that restore an even flame. And for a grill that needs its whole firebox refreshed in one order, the PETKAO GS4 Genesis II Parts Kit hands you five bars, three deflectors and three burner tubes together at 9.44 pounds. Whatever you pick, walk out and read the badge first — GENESIS II means every part on this page is in reach.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





