Every Whirlpool gas stove part is matched to the complete model number on the rating plate inside the oven drawer or on the oven rim — suffix included.
One missing digit can ship you a burner cap that won’t seat or a valve built for the wrong gas configuration. Whirlpool lists WEG515S0LZ3 and WEG515S0LV3 as separate stoves with separate parts lists, and WFGS7530RV1 and WFGS7530RZ1 get the same treatment.
Where Is the Model Number on a Whirlpool Gas Range?
Whirlpool’s guide places the model and serial label inside the oven drawer or on the oven rim. Pull the drawer and check the panel behind it, then the rim around the oven opening.
Record the model and serial numbers separately: the serial identifies your appliance for warranty and service; parts compatibility runs on the model number. Write it character by character, then read it back against the label. Whirlpool documents show the tail matters — WFGS3530RS0, WSGS7530RV0, WEG515S0LZ3, WEG515S0LV3, WEG745H0LZ5, WGG745S0FE10, WGG745S0FH10, and WGG745S0FS10 all describe different configurations. That final 0, 1, 3, 5, or 10 is not decoration.
Whirlpool Gas Stove Parts: What Decides Compatibility
Compatibility depends on the exact model number plus the component’s position, gas configuration, and finish — not the family name or 30-inch width. Two identical-looking ranges can take different burner caps. From the manufacturer’s parts lists:
| Whirlpool Model | Listed Part | Part Number |
|---|---|---|
| WFGS3530RS0 | Burner-cap kit, black set of four | W11395131 |
| WFGS3530RS0 | Gas valves (three variants listed) | W11509685 / W11509686 / W11509687 |
| WFGS3530RS0 | Regulator | W11620067 |
| WSGS7530RV0 | Burner-cap kit | W11498499 |
| WSGS7530RV0 | Anti-tip bracket | W11379947 |
| WEG745H0LZ5 | Grate kit | W11353429 |
| WEG745H0LZ5 | Burner kit | W11368533 |
| AGG222VDW6 | Hot-surface igniter | W11208965 |
| AGG222VDW6 | Manifold assembly | W11509621 |
W11498499 fits both WSGS7530RV0 and WEG745H0LZ5, but that shared part number is the exception, not the rule. Assume nothing interchanges until a Whirlpool page says it does.
How Do You Verify a Part Fits Your Exact Model?
Search Whirlpool’s parts pages with the full model number and part description, then confirm your model is named as compatible. Whirlpool’s passover-kit page, for instance, states kit W11815213 fits WFG320M0MB and WFG320M0MS — that explicit listing is what to look for.
Model-specific repair-parts lists go further. List W11724166, Revision A, dated March 7, 2024, covers WFGS3530RS0 and breaks the stove into separate gas valves, flame spreaders, orifice-holder assemblies, electrodes, regulator, bake burner, and broiler element. List W11642078 covers WEG515S0LZ3 and WEG515S0LV3; W11711850 covers WEG745H0LZ5.
One trap: a parts-list number like W11724166 is the document’s identifier, not a component. Read the diagram and pull the part number beside the component. When several candidates fit, compare tested Whirlpool gas stove parts picks against your model’s confirmed list. Whirlpool’s numbering guidance lives on its find your model and serial number page, and the WFGS3530RS0 repair-parts list shows a correct match.
Which Mistakes Send the Wrong Part Back?
Most wrong orders trace to a few habits Whirlpool’s documentation flags:
- Dropping the final suffix — the trailing 0, 1, 3, 5, or 10.
- Ordering by a generic description like “Whirlpool 30-inch gas range.”
- Matching by sight instead of by part number and diagram.
- Assuming a whole product family shares components.
- Ignoring burner position, gas type, finish, or whether the part belongs to the cooktop, oven, broiler, ignition, manifold, or regulator system.
Gas-system parts need extra care. Never install a conversion orifice, regulator, valve, or burner without confirming your gas configuration against the exact model. Shut off the gas supply and disconnect power before any work, follow the owner’s manual and local codes, and use qualified service personnel where the law requires it.
Common Questions
Is the number inside the oven drawer the model or the serial number?
Both usually appear on the same label. The model number is the shorter alphanumeric string ending in a suffix character and determines part compatibility; the serial is longer and identifies your individual appliance. Copy both and label which is which.
Why do two nearly identical stoves take different burner caps?
Whirlpool builds variants that share a base designation but differ in finish, gas setup, or revision — WEG515S0LZ3 and WEG515S0LV3 are separate models despite the shared family name, and each carries its own parts list. The reliable answer is the parts document for your exact model.
Can I order a part that lists a different model as compatible?
Only when the seller’s page explicitly names your model too. Shared parts exist — burner-cap kit W11498499 fits both WSGS7530RV0 and WEG745H0LZ5 — but you cannot generalize. Check that your full model number, suffix included, appears in the compatibility list before you pay.
Sources
- Whirlpool. “Find Your Model & Serial Number.” Confirms the rating label sits inside the oven drawer or on the oven rim.
- Whirlpool. “Gas Range Models: WFGS3530RS0,” repair-parts list W11724166 Rev. A. Source for the WFGS3530RS0 part numbers and the March 7, 2024 date.
- Whirlpool. “Gas Range,” WSGS7530RV0 repair-parts list W11749286 Rev. A. Source for the WSGS7530RV0 burner-cap, burner, grate, and anti-tip bracket numbers.