Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If your Whirlpool gas range clicks but won’t light, or a burner knob spins loose in your hand, you probably don’t need a new stove — you need one small part. The tricky bit is buying the right one, because Whirlpool uses different igniters and knobs across model lines, and the wrong part looks almost identical to the right one until you try to fit it. This guide sorts that out for you: which parts are designed to fit which Whirlpool ranges, what each one actually does, and where the real-world trade-offs sit.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you’ll find the parts that buyers report fitting cleanly, plus a plain-English breakdown of whirlpool gas stove parts so you buy once and fix it right.
Top Picks



How To Choose The Best Whirlpool Gas Stove Parts
The first job is not shopping — it’s identifying your range. Every Whirlpool gas range carries a model number on a plate, usually inside the storage drawer, on the frame behind the oven door, or under the cooktop lip. Write that number down before you look at any part. Nearly every mismatch, and nearly every return, starts with a buyer guessing from a photo instead of reading that plate.
Match the symptom to the part, not to the guess
A burner that clicks but never lights points to the igniter, which is the small glowing element that draws current to open the oven’s gas safety valve and let gas flow. A knob that spins freely, cracks, or won’t hold a setting points to the knob itself, not the valve underneath. A wobbly pot or a chipped grate corner points to the grate. Getting the symptom right saves you from buying two parts to fix one fault.
OEM versus aftermarket: what actually changes
An OEM part is built by the original equipment manufacturer to the factory drawing. Aftermarket parts are made by other companies to fit the same numbers. In practice, the fit is usually the same and the price is friendlier, but the connectors in the box and the material of a wear part can differ. Check what’s included — an igniter that ships with ceramic wire connectors saves you a second order.
Read the compatibility list like a contract
A good listing names the exact model numbers it fits, often a long string of them. Find your model in that string. If your model isn’t there, the part is a guess. Some listings also warn you off — one knob listing here tells you plainly not to buy it if the words “Off” and “Ignite” aren’t printed on the side of your existing knob, because a different part number is the one you need. That kind of warning is worth more than any photo.
Side-by-Side Comparison
| Model | Best For | Part Type | Compatible Whirlpool Series | What’s in the Box | Amazon |
|---|---|---|---|---|---|
| Whirlpool W10918546 Igniter★ Best Overall | Oven won’t light, factory match | Oven burner igniter | Replaces WPW10140611, W10140611, 98005652 | 1 igniter + 2 ceramic wire connectors | Amazon |
| Semzohc 5 Pack W10339442 KnobsBest Multi-Pack | Replacing every knob at once | Burner control knob | WFG320, WFG505, WFG510, WFG520, WFG524 | 5 knobs | Amazon |
| NISHCON W10918546 IgniterWidest Compatibility | Multi-brand range coverage | Oven burner igniter | WFG, SF1/2/3, VSF, YSF | 1 igniter + 2 ceramic wire connectors | Amazon |
| Reyhoar W10339442 Knobs | Refreshing a four-burner cooktop | Burner control knob | WFG320, WFG505, WFG510, WFG520, WFG524 | 4 knobs | Amazon |
| Funmit W10766544 Knobs | Upgrading past plastic knobs | Burner control knob | WFG710, WFG720, WFG540 | 5 knobs | Amazon |
| Whirlpool WP9758079 Igniter | Genuine OEM with warranty | Oven burner igniter | WFG515, WFG510, WFG550, WFG525 | 1 igniter | Amazon |
| W11208965 Oven Igniter | Free-standing 30-inch ranges | Oven burner igniter | WFG320, WFG505, AGG222, AGR4203 | 1 igniter + connector plug + 2 ceramic nuts | Amazon |
| atgestore W10432544 Griddle | Turning the cooktop into a flat top | Cast iron griddle plate | WFG540, WFG745, WEE750, YKSDB900 | 1 griddle plate | Amazon |
| Allstare W10447925 Grates | Replacing all four burner grates | Burner grate set | GLT3014, MGR7661, SGS375 | 4 grates | Amazon |
Detailed Reviews
1. Whirlpool W10918546 Igniter
Our pick — 4.5+★ from 400+ verified ratings; the strongest balance of quality and price.
The white OEM igniter that drops straight into the bracket and lights like nothing ever broke
Ignition is the most-praised trait in buyer feedback by a wide margin, and that’s why this sits at the top. What people care about here is simple: you turn the oven on and it lights gas the same way it did the day the range was delivered. Whirlpool builds this as a genuine OEM part, which means it’s made to the factory drawing rather than fitted to it afterwards. It ships as a single igniter with 2 ceramic wire connectors in the box, so you aren’t hunting for a connector while the oven is pulled out.
Installation is short work and it’s the second most-discussed point for good reason. The element is metal with a ceramic finish and matches the original 1.75 x 0.75 x 3.75-inch envelope, so it slots into the existing mounts. One buyer summed up the whole experience with “a breeze to replace.” That’s the shape of the job: kill the breaker, unclip the old element, wire the new one to the two connectors, and re-fit it.
The part it replaces is W10140611 — also sold under WPW10140611, 98005652, PS11770066 and W10918546VP — so if you’ve been searching under an older number, this is the same unit under a newer label. The honest catch is the plug. Compatibility is the one point where opinions split rather than agree, which usually means some ranges have a slightly different connector at the harness end. Check the plug shape on your existing igniter against the photo before you order, and the rest is routine.
Where this one earns its place
- Genuine OEM part built by Whirlpool to the factory spec, not a fitted aftermarket copy
- Ships with 2 ceramic wire connectors, so the whole job is one order
- Matches the original 1.75 x 0.75 x 3.75-inch footprint and drops into existing mounts
- Covers five part numbers, including the older W10140611 and WPW10140611
What to check before you buy
- The harness plug is the one point where fit reports split — compare yours to the photo first
- It’s a single igniter, not a kit, so you supply your own tools and patience
Worth it when: your oven burner has stopped lighting and you want the factory part with the right connectors already in the box.
Pause if: your existing igniter’s plug looks different from the one pictured — that’s the case where a return is more likely.
2. 5 Pack W10339442 Stove Knobs Fit for Whirl-Pool Gas Range
Five black knobs in one box, so a chipped knob doesn’t leave your cooktop looking patched
This box holds 5 knobs, so a five-burner cooktop gets every control replaced in one order. For a cooktop with four or five burners, buying the pack means every control on the front panel ends up looking the same age and shade, instead of one crisp new knob sitting among four faded ones. Each knob is 2 inches across, so they read as the original size on the panel rather than a smaller substitute.
Fit is where this set has done the heavy lifting, and it’s the point buyers raise far more than anything else. The listing names its compatible models in full — WFG320M0BB0 through WFG320M0BW2, WFG505M0BB0 through WFG505M0BW2, plus the WFG510, WFG520 and WFG524 families — and it replaces W10339442 along with WPW10339442VP, 2311008, AP6019877 and PS11753188. The knobs are plastic, the color is black, and they’re meant for indoor use only, which is all a cooktop ever asks for.
What you should know before ordering is that installation gets mixed reactions. The knobs press onto a D-shaped post, and if the post on your particular range has worn or the knob needs real force to seat, the job feels harder than it should. It’s not a defect so much as a tolerance thing on older cooktops. The brand here is Semzohc rather than Whirlpool, so you’re buying a compatible aftermarket knob with the correct part numbers attached — worth knowing, not worth worrying about.
Best-use case: a five-burner Whirlpool range where the knobs have cracked or gone loose and you want the whole panel refreshed in one go.
Fair warning: plastic knobs on a hot cooktop live a hard life — keep them wiped clean and don’t wrench them past the stop.
Reach for this if you want every burner knob matching again and your model number appears in the compatibility list.
Look elsewhere if you have a single damaged knob and no interest in spares — a one-knob order covers that.
3. W10918546 Oven Igniter by NISHCON
One igniter that crosses Whirlpool, Amana, Roper, Maytag and more — if your model is on the list
What you trade for that is brand certainty; what you gain is reach. The compatibility list here stretches well past Whirlpool to Amana, Estate, Roper, Maytag, Magic Chef and Ikea gas ranges, covering the WFG, SF1/2/3, VSF and YSF series plus Amana’s AGG and AGR lines, Roper’s FGP and Estate’s TGP. If your range isn’t a Whirlpool at all, this is the version that’s likely to have your model in it.
The build is ceramic, metal and heat-resistant silicon carbide, and the maker states all three are tested for anti-aging. That test matters for a simple reason: an igniter darkens and discolors as it heat-cycles, and that discoloration is normal rather than a sign of failure. Expect the element to look used after a few months and don’t read it as damage. The box includes the igniter and 2 ceramic wire connectors, and the maker asks you to cut the power before fitting and to avoid touching the element head with bare hands — contamination is the enemy of these parts.
Now the part a buyer deserves to hear clearly. Durability is the sticking point here, and it’s the most-raised concern in the data — the igniter can fail again within months, and quality is a genuinely split question rather than a settled one. A handful also found it didn’t suit their oven. None of that makes it a bad part; it makes it a part with a shorter expected service life than the factory unit. The maker backs it with a 6-month replacement promise for quality problems.
The trade-off in plain terms: you get the broadest brand coverage of any igniter here, at a lower weight and a shorter typical lifespan than the OEM version.
Install note: power off, gloves on, and don’t touch the element head — the maker flags it as fragile and contamination-sensitive.
Choose this if your range is an Amana, Roper, Estate or Maytag rather than a Whirlpool, since the model list runs wider here.
Think twice if you want the longest service life and are willing to pay for the factory part instead.
4. Reyhoar W10339442 Gas Range Knob Replacement
Four matte black knobs sized to the millimetre, for a four-burner cooktop that needs a clean sweep
Start with the measurement, because it’s the reason to pick this set over the five-pack above: each knob is 2 inches across and 1.54 inches tall, drawn to match the original OEM dimensions rather than close to them. On a four-burner Whirlpool range, that means four knobs that sit flush and match each other, with no odd one out.
The material is high-density ABS plastic, which Reyhoar cites for heat resistance and anti-crack performance. The finish is matte black with a powder-coated exterior, which hides fingerprints better than gloss does. Fitting takes minutes and needs no tools: turn the burner to off, pull the old knob straight off the D-shaped post, and press the new one on until it seats. The set replaces W10339442 along with WPW10339442, PS3507188, 2311008, AP6019877, PS11753188 and EAP11753188, and fits the WFG320, WFG505, WFG510, WFG520 and WFG524 series.
The thing to be straight about is seating. Fit is the most-discussed aspect of this set and it’s a split picture — plenty say it sits perfectly, and some find it doesn’t settle snugly on the stove. That’s often a worn D-post rather than the knob itself, and a knob that rides slightly proud still turns the valve fine. Verify your model number before ordering and you’re most of the way to a good outcome. Quality and installation both come out positive otherwise, so this is a solid four-knob set with one tolerance caveat.
Go with this if you have exactly four burner knobs to replace and want the dimensions matched to OEM rather than approximated.
Check first if your existing knobs already sit loose on worn posts — new knobs won’t fix a worn shaft.
5. Funmit W10766544 Gas Stove Knobs Replacement
Stainless steel knobs with a metal insert inside the D-hole, built to outlast the plastic originals
Most replacement knobs are plastic, and plastic is exactly what cracked in the first place. This set is stainless steel, 1.9 inches in diameter and 1.4 inches tall, with a metal insert inside the D-shaped interface and a metal ring around it to keep the mounting face from wearing out. You get 5 in the box, so spares go in the drawer.
The complaints these solve are specific — a burner that won’t start, won’t turn, or won’t stay on. On the WFG710, WFG720 and WFG540 families, this knob replaces 4248219, AP5958476, EAP10067059, PS10067059, W10430807, W10676228, AWP41411 and PD00038742. It fits without tools: pull the old knob straight off — not up or down — and press the new one on. The 0.2-inch D interface is the measurement to compare against your existing shaft if you want certainty before ordering.
There’s a firm warning in the listing that saves a lot of returns: if the words “Off” and “Ignite” aren’t printed on the side of your current knob, don’t buy this one — the part you need is W10594481. That’s unusually clear guidance and worth taking seriously. Beyond that, the one gripe that shows up is stability, with some knobs feeling less locked-in than the originals. It’s the minority report on an otherwise sturdy part, and it usually traces back to the D-post being worn rather than the knob.
Why it stands out: stainless steel body, metal insert, metal ring — the three places a plastic knob fails are all reinforced.
Order check: look at the side of your current knob and confirm “Off” and “Ignite” are printed there before you buy.
Made for a Whirlpool WFG540, WFG710 or WFG720 owner tired of replacing cracked plastic knobs.
Not the one if your knob lacks “Off” and “Ignite” markings — the listing names W10594481 as your part instead.
6. Whirlpool WP9758079 Original Genuine OEM Gas Range Igniter
The factory igniter with a one-year warranty attached to it, for buyers who don’t want to repeat the job
Here’s the difference that separates this from the aftermarket igniters on this list: Whirlpool backs it with a one-year manufacturer warranty. An igniter is a wear part that heat-cycles every time you bake, so a manufacturer standing behind it for a year is the most concrete reassurance available on any part in this category. The element uses an iridium core and replaces 9758079. It fits the WFG515S0ES, WFG510S0AS, WFG550S0HZ, WFG510S0AW and WFG525S0JS models specifically, not a broad cross-brand list.
Performance is what buyers notice first, and it carries this part — the ignition itself is the most-discussed strength by a wide margin. That usually reads as one thing: the oven fires up immediately after the swap rather than needing a second try. Installation runs short, with the whole job reported at under 15 minutes on a range that’s already been pulled out and unplugged. Fit follows the factory mounts, so nothing needs bending to get it in place.
The catch is scope. This is a narrow-compatibility part — five specific Whirlpool model lines — and it’s a single igniter with no wire connectors listed in the box. If your model isn’t among those five, this isn’t your part no matter how good the warranty is. For the buyer whose model is on that short list, the combination of a genuine OEM build and a year of coverage is the most settled option here.
Ideal for a WFG515, WFG510, WFG550 or WFG525 owner who wants the factory part and a year of manufacturer cover.
Wrong pick if your range model isn’t one of those five — check the list before anything else.
7. W11208965 Oven Igniter for Whirlpool Amana
A plug-and-play igniter with the connector already attached, sized for 30-inch free-standing ranges
The detail that makes this one easier than most is in the box: you get the igniter, a connector plug and two ceramic nuts, plus a high-temperature stainless steel cover over the element. That cover is the practical difference — the element sits behind a steel shield instead of out in the open where a bumped pan or a cleaning spray finds it. The maker states its multi-process testing exceeds the OEM standard and that the element reaches 2000-2800F within 1 minute, so the oven comes up to heat fast.
It’s aimed at 30-inch free-standing gas ranges, with Whirlpool and Amana models including AGR4203MNB0, AGR6303MMW0, WFG320M0MB0, WFG505M0BS4 and AGG222VDW6 on the list. The replacement numbers are W11506321, W11613927, 4977065, AP7193166, PS16744629, W11590294. Because the connector plug is included and pre-fitted, you aren’t splicing wires to a loose ceramic nut at the harness end — the electrical connection arrives assembled.
What this part is designed to fix is a specific cluster of symptoms: a gas smell while the oven runs, a burner that won’t glow or glows weakly, an oven that takes too long to heat or doesn’t heat at all, uneven or weak flame, and an igniter that’s stopped drawing enough amps. The caution worth hearing is durability, which shows up as a concern in the data alongside strong reliability praise — the two coexist, which suggests a batch or installation variable rather than a uniform weakness. Wear gloves, cut the power, and don’t touch the element head.
What you’re paying for: a pre-fitted connector plug, a stainless steel heat cover, and two ceramic nuts — the whole connection in one order.
The honest caveat: reliability is praised and durability is questioned in the same set of feedback, so treat it as a part with some variance.
Fits your job if you own a 30-inch free-standing Whirlpool or Amana range and want the wiring connection to arrive ready-made.
Hold off if your model number isn’t in the compatibility list — this part is model-specific despite the wide brand appeal.
8. atgestore W10432544 Cast Iron Griddle Replacement
A 19.7-inch cast iron slab that turns two burners into one wide flat top
This isn’t a repair part — it’s an upgrade, and the measurement is what sells it. At 19.7 inches long and 8 inches wide, the plate spans across two burners, giving you one continuous cooking surface instead of two separate rings. You gain the ability to sear, flip and slide food across a single flat plane — fried rice, quesadillas, cheese steaks, eggs, pizza. Anyone who has tried to cook a proper smash burger on a round grate knows why the flat surface matters.
The material is matte enamel cast iron, and the enamel coating is the practical bit — cast iron rusts when it’s left damp, and a coating holds that back. It’s thick and heavy enough to hold heat after the burner drops, which is what gives you a proper sear rather than a steam. It’s compatible with W10432544 and W10432539 across Whirlpool, KitchenAid, JennAir, Kenmore and Maytag cooktops, and the fit list runs to models like WFG540H0AH2, WFG745H0FE0 and YKSDB900ESS0. Check your model and the dimensions of your cooktop before ordering.
Two things to plan for. First, it needs seasoning before the first cook — wash it, oil it, heat it — and it only becomes non-stick once that’s done. Re-oil after washing and it stays that way. Second, the weight: at 4.52 kg, this is a plate you lift with both hands and store carefully rather than toss in a drawer. That’s normal for cast iron and not a fault, but it’s the reason some buyers use it as a permanent fixture on the cooktop rather than a stored accessory.
Best-use case: a Whirlpool, KitchenAid or JennAir gas cooktop owner who wants a griddle surface without buying a separate appliance.
Before first use: season it with oil and heat, or everything will stick — and mind the 4.52 kg weight when you lift it out.
Worth adding if you cook flat-top food regularly and your cooktop’s model number is on the compatibility list.
skip it if you want a drop-in set-and-forget accessory — cast iron asks for seasoning and hand-washing.
9. Allstare W10447925 Stove Grates Replacement, 4 Pack
Four cast iron grates that make a tired stovetop look like it just came off the showroom floor
Each grate in this set is 8.8 inches by 8.3 inches and 1.75 inches tall, and there are 4 of them, so the whole cooktop gets rebuilt at once. That’s the point — a single chipped grate leaves the rest looking shabby, and four matching porcelain enamel cast iron pieces restore the visual line. The set is heavier and thicker than the standard bars, which matters in daily use: heavier cast iron holds heat and radiates it into the pan, and it resists the scratching that thin grates suffer.
The porcelain enamel coating is what makes these workable — it means they can go in the dishwasher, which plain cast iron cannot. That’s the practical difference in maintenance: no scrubbing a rust-prone surface by hand. The set replaces W10447925 along with W10166295, W10165803, 8522858, 8522851, 8053455, WP8522858, WPW10166295 and a long list of older numbers, and fits Whirlpool GLT3014 series, Maytag MGR7661 series and Kirkland SGS375 series ranges. Compare your original grate size and model before ordering.
The trade-off is fragility in transit. Porcelain enamel is a coating on cast iron, and it can chip if the parcel takes a hard hit, which is why the maker offers a 30-day reship or exchange. In use, durability is a mixed picture rather than a clean win — a minority have seen the enamel crack and break away over time. Value for money splits too, with some buyers finding the set a bargain and others finding it on the steep side. Clean, careful handling keeps these going, and the reship window covers the arrival risk.
Correct choice for a cooktop with several chipped or stained grates where you want the whole surface matching again.
Be careful if you handle rough — porcelain enamel chips, so lift rather than drag and keep an eye on the 30-day window.
Know the Specs
Igniter: what the part actually does
An igniter is a small element that heats up and draws electrical current to open the oven’s gas safety valve. Gas only flows once that valve opens, which is why a failed igniter means the oven won’t light at all — even though the burner looks fine. Match the part number, not the photo, because igniters for different ranges look nearly identical.
OEM versus aftermarket compatibility
An OEM part is built by the original manufacturer to the factory drawing; an aftermarket part is made by another company to fit the same numbers. Both can work. The difference shows up in the box — connectors included or not — and in the material of a wear part. Always find your model number in the listing before ordering.
Knob shaft fit and the D-post
Gas range knobs press onto a D-shaped post, so the shape and depth of the D-hole is what decides whether a knob seats snugly. If a new knob sits proud, the post is often worn rather than the knob being wrong. Check the D-interface size before you buy.
Grate material and heat
Cast iron holds heat and radiates it into cookware, which is why a heavier grate cooks more steadily than a thin one. Porcelain enamel over cast iron adds rust resistance and makes the grate dishwasher-safe — but the coating can chip if handled roughly or dropped in transit.
Common Questions
How do I find my Whirlpool range model number before buying a part?
Is the W10918546 igniter the same as W10140611?
Will a WFG540H0ES0 knob fit a WFG320M0BB0 range?
Why does my new igniter look discolored after a few months?
Do I need to shut off the power to replace an oven igniter?
How do I know if I need knobs or a whole new valve?
Can I put porcelain enamel cast iron grates in the dishwasher?
Does the cast iron griddle work across all four burners?
What’s the difference between an igniter and a spark module?
Is a heavier cast iron grate really better than a thin one?
The Bottom Line
For most people, the whirlpool gas stove parts answer is the Whirlpool W10918546 Igniter, because it’s the factory part, it arrives with two ceramic wire connectors, and it covers the common W10140611 replacement numbers most owners are searching under. If your range sits outside the Whirlpool lineup — an Amana, Roper or Maytag — the NISHCON W10918546 Igniter reaches further across model lines for a comparable job. And if the igniter is fine and the burners won’t light, the Semzohc 5 Pack W10339442 Knobs gets every control matching again in one order.
The one part most buyers overlook is the knob family split — the W10339442 and W10766544 sets fit different series, so your model number decides it. Get that right, and a stove that felt broken is a ten-minute fix.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





