Schlage Connect locks use Z-Wave Plus, so app control, schedules, and voice commands all require a compatible hub.
Setup stalls for most people because Z-Wave hub compatibility with Schlage locks turns on the radio inside the lock, not the brand on the box. A Schlage Connect deadbolt runs on batteries with no Wi-Fi radio, so it cannot reach your phone, router, or voice assistant on its own. Here’s what connects to it, what each hub gives you once paired, and the order that keeps you from pairing twice.
Which Hubs Work With Schlage Connect?
Schlage names Samsung SmartThings, Wink, Ring Alarm, Control4, Blue by ADT, and Honeywell Home, and says the lock works with most Z-Wave hubs and security systems. Support in practice can hinge on the hub’s driver, firmware, and S2 security handling, so check the hub’s own device list before you buy.
| Hub | What It Gives You | Check Before Buying |
|---|---|---|
| Samsung SmartThings | Remote locking, lock status, user-code management, code-entry alerts | Broadest app and automation support |
| Ring Alarm | Lock control from the Ring app, paired at the Base Station | Lives inside the Ring app you already run |
| Wink | Lock control plus Alexa voice commands | Alexa support documented here |
| Control4 | Remote locking and status alerts | Requires the Control4 Z-Wave module |
| Blue by ADT | Z-Wave lock control through the panel | Confirm your panel’s driver |
| Honeywell Home | Z-Wave lock control through the panel | Hub model decides the features |
| Any Z-Wave Plus controller with S2 | Basic locking and status reporting | Feature depth varies by driver |
Alexa and Google Assistant are a separate question. Neither talks to the deadbolt directly: Schlage documents Alexa control through SmartThings and Wink, and states Google Assistant needs integration with a compatible smart-home hub. If voice control is why you’re shopping, choose the hub first and the lock second.
No hub in the house yet? Our tested roundup of Z-Wave hubs for Schlage covers which controllers pair cleanly and which need a driver loaded first.
Schlage Lock Z-Wave Compatibility: What Decides The Outcome
The radio inside the lock decides everything. Schlage Connect is a Z-Wave Plus device with S2 Security encryption and talks only to Z-Wave controllers.
Naming is where people get burned. Schlage sells Connect in both Z-Wave and Zigbee versions, and sells Encode and Arrive as Wi-Fi locks that need no hub. An Encode on Wi-Fi and a Connect on Z-Wave are not interchangeable, and the boxes look similar enough to grab the wrong one. Match the protocol to the hub you own or plan to own, not the finish.
Schlage’s Connect Z-Wave page covers the BE469ZP family, including trim variants such as the Century.
Fit comes before protocol.
Pairing Order That Avoids Doing It Twice
Pair the lock to the hub before adding codes or automations, and exclude it from the old network before moving it to a new one. Hardware first, radio second, rules last.
- Install the deadbolt with a screwdriver and check the bolt moves freely by hand before any batteries go in.
- Load four AA alkaline batteries and keep the programming code from the box.
- Put the hub into Add Device or inclusion mode — the label varies by hub and usually sits under device settings.
- Enroll the lock. Schlage documents QR-code setup and one-button enrollment on supported systems; finish inclusion from the hub’s app or controller.
- Name the lock, then test a locking command from the app while standing at the door, and again from outside the house.
- Moving to another hub later? Run Exclusion from the old network first. A lock still joined to a network it can’t reach will refuse to include anywhere else.
Common Questions
Does Schlage Connect Need A Hub To Work?
Yes, for anything beyond the keypad itself. Code entry, the thumbturn, and built-in codes work with no hub. App control, remote access, schedules, status reporting, and voice commands run through a Z-Wave hub. Without one you still own a solid electronic deadbolt, just not a smart one.
Will A Schlage Connect Lock Work With Alexa Or Google?
Not directly. Alexa needs a compatible hub in between, and Schlage documents that path through SmartThings and Wink. Google Assistant likewise requires integration with a compatible smart-home hub. The lock has no Wi-Fi radio, so no voice assistant can reach it without a controller translating.
Can Two Z-Wave Hubs Control The Same Schlage Lock?
No. A Z-Wave lock belongs to one network at a time. To move it, run exclusion from the old hub first, then include it on the new one. Skipping that leaves the lock holding a stale network ID, and inclusion on the second hub will fail until you clear it.
Sources
- Schlage. “Connect Z-Wave Smart Locks” Product family page covering the Z-Wave Plus models, trim options, and hub requirements.
- Schlage. “Schlage Connect Z-Wave FAQs” Lists compatible systems plus Alexa and Google Assistant requirements.
- Schlage. “Connect Smart Deadbolt Specification Sheet” Supplies access-code count, battery type, dimensions, temperature range, and ANSI/BHMA ratings.