Authentic U.S. WW2 combat boots use roughout (flesh-side-out) leather uppers, rubber soles and heels, and soles attached by Goodyear welt stitching reinforced with nails.
One glance at a marketplace listing full of “original 1943” claims is enough to show how thin the evidence usually is. Construction is the part that can’t be faked cheaply, and it’s the fastest way to tell a wartime boot from a postwar rebuild or a modern reproduction.
The double-buckle combat boot is the boot most collectors mean by “WW2 combat boot,” and its story is shorter than most people assume. It reached the field in real numbers only in fall 1944.
Which Materials Separate Wartime Boots From Reproductions?
Wartime uppers were flesh-out Army Retan leather — chromium-sulfate tanned, then vegetable retanned — with the rough side facing out and a full synthetic-rubber outsole and heel beneath a leather midsole and insole.
The roughout finish wasn’t cosmetic. Flesh-side-out leather takes waterproofing wax well, and soldiers were expected to treat it. That wax improved water repellency; it did not make the boot fully waterproof, and long wet wear could degrade leather and stitching alike.
Three material details do most of the sorting work:
- Outsole: synthetic or reclaimed rubber, not leather. Ankle-high service shoes carried leather soles early on and rubber after 1940.
- Upper: roughout or russet leather. A shiny brown plastic coating points elsewhere — Army stocks were coated with brown plastic starting in June 1950, so a plastic-coated boot is not automatically a wartime finish.
What Tells You a Sole Is Correctly Built?
Specification boots used a synthetic-rubber outsole and heel attached with a Goodyear welt plus reinforcing nails, and the nail pattern is where BQD 110 and BQD 114 diverge.
BQD 110 secured the quarters to the vamp with rivets and skipped reinforcing nails at the ball of the foot. BQD 114, issued in March 1944, replaced the rivets with a bar tack and ran a continuous line of reinforcing nails around the outsole edge. Both details sit low on the boot, where photos rarely go.
The M1943 high-top followed a different pattern — full lacing, no buckle cuff — and was mostly worn stateside during the war.
If you’re weighing originals against modern builds, these tested WW2 combat boot picks show how current makers handle the roughout and sole construction.
Which Internal Markings Confirm Wartime Production?
Size was punched or impressed into the insole or inside collar, factory codes were punched inside the cuff, and manufacturer, contract, specification, depot, and date information may appear inside the collar.
Markings only count when they agree with the physical boot. A date, contract, and spec that contradict each other are a warning, not a provenance. The National Museum of the U.S. Air Force and the Australian War Memorial both hold documented examples worth comparing against — the War Memorial’s M43 pair, accession REL38816, shows the stitch-and-nail sole attachment clearly.
The U.S. Department of War’s Common Threads: Army overview is the starting reference for standard-issue footwear of the period.
| Feature | Wartime Standard | Red Flag |
|---|---|---|
| Upper leather | Flesh-out Army Retan, roughout or russet | Plastic-coated brown finish |
| Sole attachment | Goodyear welt plus reinforcing nails | Glued sole, no stitching |
| Nail pattern | BQD 114: continuous nails at outsole edge | Nails missing at ball of foot on a claimed BQD 114 |
| Buckle cuff | Two leather straps, seven eyelets, canvas lining | Single buckle or stitched-on decoration |
| Height | About 10 inches overall | Ankle-high shoe passed off as a combat boot |
| Markings | Size inside collar or insole, factory code in cuff | Stamps that contradict the spec or date |
| Outsole | Synthetic or reclaimed rubber | Leather sole on a claimed double-buckle |
What Should Keep You From Wearing an Original?
Original leather, rubber, stitching, nails, buckles, and aged adhesives may be structurally unsafe for modern wear, and a collection piece should be checked by a conservator or footwear specialist before anyone puts weight on it.
Two more mix-ups are worth naming. Service shoes were ankle-high and needed canvas leggings; the combat boot carried its two-buckle cuff permanently attached. Jump boots and the M-1942 jungle boot were specialized footwear built for different jobs — the jungle boot used cotton canvas, black rubber soles, and ventilating mesh — and neither substitutes for a standard double-buckle combat boot.
Postwar boots muddy the picture too. The M1945 tropical boot arrived in summer 1945 with spun nylon and a leather midsole, and the M1949 russet lace-up was issued only after wartime M1943 stocks ran out. A “double-buckle” or “M1943” label on its own proves nothing; the construction has to match the claim.
Common Questions
Were all WW2 combat boots fully waterproof?
No. Flesh-out leather treated with waterproofing wax resisted water better than smooth leather, but wartime combat footwear was not built to be fully waterproof. Prolonged wet use could damage the leather and stitching, which is why soldiers were expected to dry and re-wax boots between wears.
How can you tell a roughout upper from a smooth one?
Roughout leather has a visible nap on the outside, like suede but heavier. Turn the boot in raking light: a wartime upper shows a matte, fibrous surface rather than a polished grain. Smooth, glossy brown finishes usually point to later plastic coating or a reproduction build.
Why do BQD 110 and BQD 114 boots look different underneath?
The specifications changed the sole-area construction. BQD 110 used rivets joining the quarters to the vamp and had no reinforcing nails at the ball of the foot, while BQD 114 replaced the rivets with a bar tack and added a continuous nail line around the outsole edge. Flipping the boot over settles which one you have.
Sources
- U.S. Department of War. “Common Threads: Army.” Reference for standard-issue U.S. Army footwear of the WWII period.
- Australian War Memorial. “M43 Combat Service Boots, accession REL38816.” Documented example showing roughout upper and stitch-and-nail sole attachment.
- National Museum of the U.S. Air Force. “Tools of the Trade.” Museum context for WWII-era issue equipment and footwear.