Fill power measures how many cubic inches one ounce of down lofts, so 800-fill down traps more warmth per ounce than 600-fill — but total down weight and coat construction decide how warm a women’s goose down coat actually is.
A coat tagged 800-fill can feel colder than a 600-fill coat on the same rack, because the number describes insulation efficiency, not the amount of down inside. Fill power tells you how much loft one ounce of goose down produces. It says nothing about how many ounces the coat contains, how the baffles are built, or whether wind cuts straight through the shell. Understanding what fill power means for women’s goose down coats starts with separating the loft rating from the warmth it does not guarantee.
What Does Fill Power Actually Measure?
Fill power measures loft: one ounce of down is placed in a cylinder, compressed with a lightly weighted disk for one minute, and its recovered volume is read in cubic inches. A 600-fill sample occupies 600 cubic inches; an 800-fill sample occupies 800. Higher-quality down also springs back faster after being packed, which is why 900 fill sits near the top of what’s commercially available.
That test yields an efficiency figure, never a temperature rating. Insulated jackets in general don’t carry standardized warmth ratings the way sleeping bags do, so a “rated to -20°F” claim on a product page reflects the brand’s own testing, not a universal standard. Two coats with identical fill power can land at very different comfort ranges once down quantity, length, hood, and shell enter the picture.
Fill Power vs. Fill Weight: Why the Second Number Matters More
Fill weight is the actual mass of down in the garment, usually listed in grams or ounces, and it drives warmth far more directly than fill power. A high-loft coat with a thin fill weight loses to a lower-loft coat stuffed with substantially more down. The two numbers work as a team, and a product page that hides the fill weight is telling you less than it appears to.
The down-to-feather ratio is the third piece. Current examples run 80% down/20% feather, 85/15, and 90/10. Down is the insulating plumule; feathers are heavier and add little loft, so a 90/10 fill beats an 80/20 fill at the same fill-power rating.
| Fill Power | What It Signals | Typical Use |
|---|---|---|
| 600 | Solid loft, heavier for the warmth | Long casual coats, everyday cold |
| 700 | Balanced weight and warmth | Three-season town jackets |
| 800 | Strong warmth-to-weight, good compression | Travel and active winter wear |
| 850 | Premium loft, higher cost per ounce | Technical and packable shells |
| 900 | Near the commercial ceiling | Ultralight alpine pieces |
| 90/10 ratio | Less feather, more insulating plumule | Any fill power above |
| RDS certified | Animal-welfare supply chain standard | Ethics, not warmth |
REI’s explainer on how down fill power is measured walks through the same cylinder test, and it’s worth reading before you compare two product pages side by side.
What Construction and Weather Do to That Number
Baffle design decides whether the down you paid for can actually loft. Box-wall baffles use fabric walls between chambers so down fills fully without compression seams, which distributes warmth evenly and eliminates cold spots. Stitch-through construction sews the shell directly to the lining — lighter and cheaper, but each stitch line is a thin, cold seam.
Down also loses its insulating power when wet. It clumps, drops loft, and takes a long time to dry, and even treated down can soak through in heavy rain or full immersion. A water-repellent shell and a hood often matter more on a wet commute than 100 extra fill points. Wind protection, cuff seals, and coat length all change real-world warmth too — a 29-inch center-back length covers more of the body than a hip-length cut at the same fill power.
Care follows the same logic: down garments need specialized washing and drying per the manufacturer’s instructions, and a coat that loses loft from poor drying never performs to its rating again. When you’re ready to compare specific models, this roundup of tested women’s goose down coats puts the fill weights and prices next to each other.
How Should You Compare Two Coats?
Compare fill power, fill weight, down-to-feather ratio, and construction together — never the loft number alone. Start with the fill power to gauge efficiency, then hunt for the disclosed down mass in grams or ounces. Check the ratio (90/10 beats 80/20), then look at baffle type, shell fabric, hood, and length. Factor in whether the down is RDS-certified if animal welfare matters to you — certification speaks to supply chain, not warmth. Finally, treat every price as time-sensitive: retail figures on down coats move with the season, and specs get revised between production runs, so recheck the product page before buying.
Common Questions
Is a higher fill power always warmer?
No. Fill power measures loft per ounce, not total insulation. A 600-fill coat packed with more down can be warmer than a thinly filled 800-fill jacket. Warmth comes from the combination of fill power, fill weight, baffle construction, length, and weather protection — which is why a disclosed down weight matters so much when comparing two coats.
Does fill power apply to synthetic jackets?
No. Fill power is a down-specific measurement with no direct synthetic equivalent, so you cannot compare a down coat’s 800-fill rating against a synthetic jacket’s specs. Synthetic insulation is described by its own weight and construction terms instead, and REI’s down-versus-synthetic comparison covers where each material performs best.
What does RDS certification tell me about a down coat?
RDS certification addresses animal-welfare and supply-chain standards, verified by an auditing body such as IDFL. It says nothing about warmth, fill power, or durability. Treat it as an ethics label, then evaluate the insulation itself through fill power, fill weight, down-to-feather ratio, and how the coat is built.
Sources
- REI. “What Is Down Fill Power?” Explains the loft test and how fill power is measured in cubic inches.
- REI. “Down vs. Synthetic Insulation” Covers how down and synthetic fills differ in warmth and wet-weather performance.
- REI. “How to Choose Insulated Outerwear” Details baffle construction, shell protection, and fit considerations.