Troy-Bilt string trimmers take TrimmerPlus attachments only if the power head is marked attachment-capable; no official model chart exists.
The label on the shaft decides it. Troy-Bilt states attachment-capable status on individual product pages rather than in one master grid, so anyone seeking a troy-bilt weed eater attachment compatibility chart by model hits the same gap: official material names the connector standard and the attachment-capable designation, not a lookup table covering every trimmer sold.
Here is what does exist — which current models carry the wording, what each add-on does, and the one-minute check that settles it for your machine.
Which Troy-Bilt Models Accept TrimmerPlus Attachments?
Only a power head Troy-Bilt labels attachment-capable takes the tools. The TB25CH curved-shaft trimmer is the current listing that states it outright. Mounting is tool-free: an attachment slides onto the coupler and locks without a wrench.
- TB25CH curved-shaft string trimmer (item 41AD25CH766) — the model page names TrimmerPlus attachment capability outright.
- TB304S straight-shaft string trimmer (item 41BD304S766) — from $249.00 MSRP; attachment capability is not stated, so check before buying tools.
- TB25SB straight-shaft string trimmer (item 41AD25SB966) — from $149.00 MSRP; capability unconfirmed in the listing.
- TB25CB curved-shaft string trimmer (item 41AD25CB966) — from $139.00 MSRP; capability unconfirmed in the listing.
- TB25HT hedge trimmer (item 41BD25HT766) — from $249.00 MSRP; this is a hedge trimmer, not a power head, so the add-on tools do not apply.
A shortcut sits in the category navigation: Troy-Bilt tags trimmer listings with a TrimmerPlus® Attachment Capable filter, and anything wearing that tag mounts the tools. The TB25CH page is a prior-year-model listing, so its paperwork uses older form numbers — operator manual 769-24210, parts list 769-24211.
What Each TrimmerPlus Attachment Adds
The blower moves up to 500 CFM, the edger cuts to 2.5 inches deep, and the pole saw runs an 8-inch bar and chain.
| TrimmerPlus Attachment | Job It Handles | Notable Spec |
|---|---|---|
| CB720 add-on blower | Clearing leaves and clippings | Up to 500 CFM air volume |
| TPE720 add-on lawn edger | Edging walks and beds | Hardened-steel blade, 2.5-inch depth |
| TPP720 add-on pole saw | Cutting high limbs | 8-inch bar and chain |
| TPH720 add-on hedge trimmer | Shaping hedges and shrubs | 22-inch dual-action blades, articulating head |
| TPG720 add-on cultivator | Breaking up soil in beds | Adjustable tilling width |
| TPB720 add-on brushcutter kit | Cutting heavy brush | Four-tooth steel blade, J-handle, shoulder strap |
| AS720 fixed line cutting head | Reaching under decks and fences | 34-inch reach, aluminum body |
Item numbers shift between listing years — the fixed-line head appears as both 41CJXL-C902 and 41AJXL-C902 — so match the tool to your power head, not to last season’s price. For a shortlist ranked by real use, our tested roundup of Troy-Bilt attachments is the faster read.
Troy-Bilt Weed Eater Attachment Compatibility: The Check That Settles It
Compatibility comes down to wording, which appears in three places: the product page, the operator manual, and the model tag. Checking any one takes about a minute.
- Find the model tag on the trimmer’s shaft or engine housing. It carries the model name and item number, formatted like
41AD25CH766. - Search that item number on Troy-Bilt’s site and open the product page. Look for the TrimmerPlus® Attachment Capable label or an Attachments line in the specifications.
- Open the operator manual for the same model and read the approved-attachments section. Manuals are filed by form number, and the text names the tools cleared for that power head.
- Skip photo guessing. The official write-up describes a coupler that takes the tools with no hardware at all.
Troy-Bilt’s own guide to multiple-use string trimmers confirms that tool-free connection and adds a detail worth knowing: attachment-capable power heads from Remington, Yard Machines, Craftsman, Bolens, Hyper Tough, Snapper, and Cub Cadet accept the same TrimmerPlus tools.
When it checks out, the product page or manual names TrimmerPlus in plain text. If that word never turns up on the page, in the manual, or on the tag, plan on using the machine as a standalone trimmer.
Common Questions
Do TrimmerPlus Attachments Fit Other Brands Of Power Head?
Some do. Troy-Bilt lists Remington, Yard Machines, Craftsman, Bolens, Hyper Tough, Snapper, and Cub Cadet among brands whose attachment-capable power heads accept TrimmerPlus tools. The deciding factor is the same across all of them: the power head must be sold as attachment-capable. A trimmer from any of those brands without that designation will not mount the tools, and no adapter changes that.
Can A Trimmer Be Converted If It Wasn’t Built Attachment-Capable?
No. The coupler and its mounting hardware are part of how the power head is built, and Troy-Bilt publishes no retrofit kit for turning a standard trimmer into one that accepts add-on tools. If the product page, manual, and model tag never mention attachment capability, treat that machine as a dedicated string trimmer and buy a separate tool for edging or blowing.
Do I Need Tools To Swap The Attachments?
No. The coupler is tool-free: loosen the collar by hand, pull the attachment off, push the next one on, and tighten the collar again. Shut the trimmer off and let the engine cool first, since the coupler sits close to hot parts on a gas unit. When the collar is tight and the attachment will not twist by hand, the mount is seated.
Sources
- Troy-Bilt. “Multiple-Use String Trimmer + Attachments.” Confirms the tool-free coupler, the 500 CFM blower figure, and cross-brand attachment-capable power heads.
- Troy-Bilt. “TrimmerPlus.” Lists current attachment models, item numbers, MSRP, and the TB25CH attachment-capable designation.
- Troy-Bilt. “Attachments.” Matches TrimmerPlus attachments to compatible attachment-capable power heads.