Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Buying a Troy-Bilt attachment is mostly a fit question, not a features question. Every tool on this list snaps onto an attachment-capable Troy-Bilt powerhead, but the coupler, the drive shaft shape, and the model of your trimmer decide whether it actually works. Get those right and one gas powerhead runs the edger, the string head, and the hedge blade off a single engine.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A coupler is the socket where the attachment plugs into your powerhead, and it is the one thing worth checking twice before you buy any of these. Below you will find the exact numbers that make the best Troy Bilt weed eater attachments snap on and stay tight.
Top Picks



How To Choose The Best Troy Bilt Weed Eater Attachments
The wrong attachment does not just underperform — it will not seat in the coupler at all. So start with your own powerhead, not with the attachment photos. Grab your trimmer’s model number off the engine housing and match it to the compatibility line before anything else.
Check the coupler and the drive shaft shape first
The coupler is the collar on your powerhead where the attachment slides in. Several attachments here are built for a 1-inch diameter tube with a square drive shaft connector, which is the common shape across attachment-capable Troy-Bilt, Remington, and Craftsman units. If your shaft is splined or a different diameter, the tool will not lock down.
Watch the rotation direction too. One flexible-shaft attachment on this list is built with its anti-rotation positioning point on the right side of the user and cuts to the left, so it does not suit every powerhead orientation.
Match the head type to how you actually trim
A bump-feed head lets you release fresh line by tapping the spool on the ground mid-job — no stopping, no opening the cap. A fixed-line head takes pre-cut lengths you insert by hand, which is quicker to load but requires you to carry spare segments. Both spool-style replacements on this list are cut-and-replace jobs done in seconds.
Know which attachments refuse electric power
Gas powerheads run these attachments well because the engine delivers torque through the shaft without overheating. One edger here explicitly warns against electric or battery-powered units because the motor can overheat and damage the tool. If you run a battery trimmer, buy the attachment whose listing confirms your exact model.
Side-by-Side Comparison
| Model | Best For | Cutting Width | Tool Type | Weight | Amazon |
|---|---|---|---|---|---|
| Trimmer Plus 41BJLE-C902 Edger Attachment★ Best Overall | Crisp sidewalk and driveway edges | 7.5 inches | Steel edger blade | 6.6 pounds | Amazon |
| Replacement Spool for Troy-Bilt TB22 TB25CB TB25SB TB252SBest Value | Cheap refresh for a tired trimmer head | — | String spool | 11.3 ounces | Amazon |
| Trimmer Head Replacement for BL110 & TB22Kit Pick | One-box spool and cap kit | — | Bump-feed spool kit | 6.7 ounces | Amazon |
| MTD Troy-Bilt 753-08561 Bump Head Assembly | Exact TB35EC replacement | — | Bump head assembly | 6.4 ounces | Amazon |
| 16 in. Articulating Hedge Trimmer Attachment | Reaching hedge tops without a ladder | 16 inches | Hedge trimmer blade | — | Amazon |
| Flexible Strimmer Attachment for Troy-Bilt Powerheads | Trimming under bushes and fencing | — | Flexible shaft trimmer | 4.6 pounds | Amazon |
| String Trimmer Attachment for MTD Troy-Bilt Gas Trimmer Head | Budget head swap on listed models | 10 inches | String trimmer head | 3 pounds | Amazon |
| TrimmerPlus TPH720 22-inch Hedge Trimmer Attachment | Wide sweep on long hedge runs | 22 inches | Hedge trimmer blade | 3.13 kg | Amazon |
| TrimmerPlus AH721 22-Inch Dual Hedger Attachment | Heavy hedge trimming season after season | 22 inches | Hedge trimmer blade | 6 pounds | Amazon |
Detailed Reviews
1. Trimmer Plus 41BJLE-C902 Edger Attachment
Our pick — 4.5+★ from 400+ verified ratings; the strongest balance of quality and price.
A wheel-guided steel blade that turns a scruffy walkway into a razor line.
If your yard’s problem is a fuzzy border where the grass creeps over the concrete, this is the tool that fixes it. The 7.5-inch steel edger blade cuts a clean channel, and the adjustable blade reaches down to 2.5 inches of depth for a trench-like edge. A 3.75-inch wheel carries the weight along the pavement so you are not fighting the tool as you walk.
What wins people over is the build — quality is the most-praised thing about this attachment by a wide margin, and functionality sits right behind it. The angle of the boom is set so you get a clear viewing path down at the blade, which means you can see the cut line instead of guessing at it. It connects to attachment-capable trimmers from Troy-Bilt, Remington, Craftsman and more, and Trimmer Plus backs it with a 2-year limited warranty.
Here is the catch, and it is a real one: do not run this on an electric or battery-powered unit. The maker warns that the motor can overheat and damage the tool. Ease of use and fit both draw mixed feedback, so confirm your powerhead is gas and attachment-capable before you buy. As for size, this is a wide piece at 35.5 inches across and 6.25 inches long — noticeably broader in the box than the flexible strimmer below, which measures 4.34 inches wide and 37 inches long, so store it flat.
Where this edger earns its spot
- 7.5-inch steel blade digs a real edge, with 2.5 inches of adjustable depth
- 3.75-inch wheel rolls along the pavement so the cut stays straight
- Boom angle gives you a clear view of the blade while you work
- 2-year limited warranty covers parts and labor for 24 months
What to weigh before ordering
- Maker warns against electric or battery powerheads — gas only
- At 6.6 pounds it is one of the heaviest pieces on this list
- Fit varies by trimmer model, so verify your exact powerhead
The sharpest call: Buy this if you have a gas attachment-capable Troy-Bilt and a sidewalk or driveway that needs a hard, clean line.
Think twice: Battery-trimmer owners should look elsewhere, because this blade is not built for that motor.
2. Troy-Bilt TB22 TB25CB TB25SB TB252S Replacement Spool
The spare spool that gets a stalled TB22 back into the grass the same afternoon.
The strength of this spool is the parts list it replaces. It is built for the TB22 family — TB22, TB22EC, TB25SB, and the 252S — and it also replaces a long run of numbered components: 753-06571 gearbox parts, 753-1155 inner reels, 953-1156 reel line spool assemblies, and 791-180120 bump heads. It crosses over to Remington Rustler and Wrangler models, Bolens BL110 and BL160, Hyper Tough H2500 through H2520, Cub Cadet CS202 and CC4165, and Craftsman WC205 through WC2200.
Fit is the entire game with a spool, and this one is designed to drop into small bump heads rather than be trimmed to size. Functionality is what people talk about most with this part, with quality close behind — it does the job it was cut for.
Weigh the size honestly: at 11.3 ounces this spool is heavier than the OEM bump head assembly below, which checks in at 6.4 ounces. That extra heft is line and plastic, and you will feel it slightly in the balance of a curved-shaft trimmer. It is also a single spool, not a kit, so if your cap and spring are worn, the PEHUAP set further down includes both. Bottom line: the cheapest way to stop a dead trimmer from sitting in the garage.
Why it earns the value label: It is a direct replacement across an unusually long list of model numbers, so the odds of it matching your trimmer are high.
The trade-off: One spool only, and at 11.3 ounces it changes the feel of a light curved-shaft unit.
Reach for this if: You own a TB22-family, Remington, Bolens, or Hyper Tough trimmer and just need line back in the head.
Look elsewhere if: Your cap or spring is also shot — the kit pick two spots down bundles all three.
3. BL110 & TB22 Trimmer Head Replacement
Three pre-wound spools, a cap and a spring — one box, one afternoon, back to trimming.
This kit solves that by shipping 3 pre-wound dual-line spools, each carrying 18 feet of 0.095-inch line, plus a replacement cap cover and a trimmer head spring. When the bump head finally cracks, you already have the fix in the garage.
It fits the Troy-Bilt TB22 at 41CDZ25C766, the TB22EC at 41ADT22C966, the TB25SB at 41AD25SB966, plus the TB625EC and 252S. Beyond Troy-Bilt it covers Bolens BL110, BL160, and BL250, Remington Rustler and Wrangler models, Craftsman WC205 through WC2200, Cub Cadet CS202 through CC4025, MTD 753-1155 and 753-1156, and Hyper Tough H2500 through H2520. The line is twisted ABS-plus-nylon, and the spools are built to be swapped in about 30 seconds without special tools.
Compare it to the MTD bump head assembly below — that one is a single OEM part measured at 7 x 7 x 7 inches, while this spool cartridge is 2.55 x 2.55 x 0.9 inches and stacks easily in a drawer. Quality draws the strongest reactions here, though value gets mixed opinions, so read the listing against your model before clicking. Note the 0.095-inch line diameter: it is a heavier gauge than some trimmers ship with, so confirm your head takes it.
The good: Three spools plus the cap and spring cover a full season of breakage in one purchase.
The caveat: Value feedback is mixed, and the 0.095-inch line needs a head rated for it.
Right choice for: Anyone who has already broken a cap or lost a spring and wants spares on the shelf.
Not for you if: Your head is fine and you just need one refill — the single spool above is the leaner buy.
4. MTD Troy-Bilt 753-08561 Bump Head Assembly Left Hand
Genuine MTD number 753-08561, built for one trimmer and one trimmer only.
This is the part you buy when you want the exact factory piece and nothing else. It carries the real MTD part number 753-08561 and is listed for the Troy-Bilt TB35EC string trimmer. There is no universal fit story here — the maker’s own guidance is to check your equipment owner’s manual to verify compatibility before ordering.
At 6.4 ounces it is lighter than the aftermarket spool above by a small margin, and that lighter head keeps a short trimmer feeling balanced in the hand. Backyard fixers who want the factory part without a dealer trip will recognize the value.
The honest limit is coverage. If you do not own a TB35EC, this head is not for you, and the listing does not promise anything else. That narrowness is the point: a genuine MTD part number beats an aftermarket guess every time. Best moment for it: the day your factory bump head finally strips its threads.
Buy it once: TB35EC owners get the factory-correct part with the right MTD number on the box.
Not for: anyone with a different Troy-Bilt model, since this one is listed for a single trimmer.
5. 16 in. Articulating Hedge Trimmer Attachment Universal
A 37-inch reach that puts the top of the hedge within arm’s length instead of under a ladder.
Hedge trimming on a powerhead attachment is a reach problem before it is a cutting problem, and this 37-inch shaft puts the blade over the hedge top from the ground. The head locks anywhere from 75° to 90°, so you can angle the blade over the top of a hedge and cut level without climbing. The 16-inch dual-action blade handles a 0.75-inch cutting capacity, which covers most residential shrub growth.
It fits attachment-capable units from Troy-Bilt, Remington, Craftsman, Yard Machines, Yardman, Snapper, Bolens, Murray, Ryobi, Greenworks, and Kobalt, and the coupler takes a 1-inch diameter tube with a square drive shaft connector. The blades are high carbon steel.
Size it against the edger above: this blade is 16 inches wide versus that edger’s 7.5 inches, so it clears a much wider pass per stroke. Fit is the strongest reaction this attachment draws, and the value lands well, though performance and build quality split opinion — some units hold up and some do not. The square drive shaft connector and 1-inch coupler are the two things to check against your powerhead before you order. For the hedge-lined yard: this is the reach you want.
What stands out: 37 inches of shaft plus a 75° to 90° articulating lock keeps you on the ground.
What to know: Build durability is mixed, so treat the blade with care and store it dry.
Pick it when: Your hedges are tall and your powerhead has a 1-inch coupler with a square shaft.
skip it if: You want a wide 22-inch sweep — the TrimmerPlus models below cover more ground per pass.
6. Flexible Strimmer Attachment for Troy-Bilt’s Family Grass Powerhead
A whippy lower boom that bends under shrubs where a straight shaft cannot follow.
A straight shaft trims open lawn well but cannot bend under fencing or shrubs. This flexible shaft attachment adds 34 inches of extended reach so you can trim under bushes, around fencing, and in the tight corners a rigid shaft cannot enter. The package includes the flexible shaft trimmer attachment, 3 teeth blade, and a line trimmer head.
Its boom is built from lightweight heavy-duty aluminum, which keeps the whole thing at 4.6 pounds while you are holding it out at arm’s length. The fixed line head takes pre-cut lengths that insert by hand, so reloading takes a moment instead of a tool.
Shape is where it surprises you. Length-wise it measures 37 inches against the edger’s 6.25 inches, so it is a long, slim piece in the garage, and its 4.34-inch width makes it easy to hang on a wall hook. Do check the rotation: the maker states the anti-rotation positioning point sits on the right side of the user and that the cutting direction turns left. It is listed as fitting Craftsman and Troy-Bilt powerheads and more, but the listing urges a careful look before you buy. One clear caution: confirm your powerhead’s rotation setup matches, or the head will fight you.
Pulls its weight for: Yards with foundation shrubs, chain-link fencing, and corners a straight shaft skips.
Confirm before buying: The right-side positioning point and left-turning cut rule out some powerheads.
7. String Trimmer Attachment for MTD’s Troy-Bilt Gas Trimmer Head System
A light head swap for specific Troy-Bilt models — if the head stays put.
This is the pick for a very narrow set of trimmers, and the listing is upfront about which ones. It names the Troy-Bilt 41AD272S766 straight shaft brushcutter and string trimmer, the 41CDZ25C766 TB22 25cc curved shaft gas trimmer, the 41BD304S766 17cc straight shaft unit, and the 41BD25HT766 hedge trimmer, plus Hyper Tough H2510 and H2520 and Craftsman WS2200, WC210, WC2200, and WS205.
At 3 pounds with a 10-inch cutting width, it is the lightest and narrowest head here, and the package throws in a tool set so you are not hunting for a wrench. That low weight makes it easy to hold for a full pass along a fence line.
Be honest about the reviews before you commit. The head has a habit of spinning off, durability complaints come up repeatedly, and quality feedback runs negative. Functionality is mixed at best. Compare it to the OEM assembly above — that one is a single genuine part with a factory number, and if your model is listed for it, the factory part is the safer purchase. Only worth it if: your exact model is on the list and you accept the head may need re-tightening.
The draw: 3 pounds, a 10-inch cut, and a tool set in the box for the lightest carry here.
The honest risk: Spinning heads and durability gripes are the recurring theme, not one-offs.
Consider it if: Your trimmer model appears exactly in the listing and you want the lightest swap.
Steer clear if: You can use the OEM MTD part instead — that route has fewer moving failures.
8. TrimmerPlus TPH720 22-inch Hedge Trimmer Attachment
Twenty-two inches of double-sided blade that eats a hedge side-to-side without turning the machine.
Long hedge runs reward a wide blade, and this one cuts 22 inches on both sides through 7/16-inch gaps. That means you sweep one direction and cut with both edges, so a long row takes fewer passes. The articulating head locks anywhere from 0 to 135 degrees to reach the tops and the awkward shoulders of a hedge.
The case is full metal for heavy use, and the maker backs it with a 2-year limited warranty. It fits attachment-capable units from Troy-Bilt, Remington, Craftsman, Yard Machines, Yardman, Snapper, Bolens, Murray, Ryobi, Greenworks, and Kobalt, with a 1-inch powerhead coupler and a square drive shaft connector at.205 inch female with.200 inch across flats.
Compare the gap against the AH721 below — this one runs 7/16-inch gaps, and that one runs ¾-inch gaps, which is the difference between trimming growth and powering through thicker stock. Reliability is where opinions split: plenty say it works well, and some report it stops running after about 10 minutes of use. Size the use case around that, and give it cool-down breaks on big jobs. Best for a homeowner with a long formal hedge who does not run the tool flat out.
The case for it: 22-inch double-sided blades plus 0-135° articulation cover big hedges in fewer strokes.
The catch: Some units quit after a short run, so plan cool-downs and keep the receipt.
Fits your routine if: You trim long hedge rows on a gas powerhead and want a wider blade than 16 inches.
Should give you pause if: You run the trimmer nonstop for hours — this head prefers breaks.
9. TrimmerPlus AH721 22-Inch Dual Hedger Attachment
The hedger that has done this job longer than anything else on the list.
The AH721 is the longest-established hedge attachment here, and the one to pick when you want a proven 22-inch blade over a cheaper gamble. Its 22-inch double-sided blades run ¾-inch gaps — noticeably wider open than the TPH720’s 7/16-inch gaps — and the articulating head locks from 0 to 135 degrees. The full metal case takes heavy use.
What wins people over is plain function: functionality and quality are the two things buyers react to most strongly, and the blade is well-liked for cutting performance and ease of install. It works across Stihl and Ryobi powerheads, fits the Husqvarna 128LD, and is compatible with attachment-capable units from Troy-Bilt, Remington, Craftsman, Yard Machines, Yardman, Snapper, Bolens, Murray, Ryobi, Greenworks, and Kobalt. The coupler accepts a 1-inch tube with a square drive shaft connector at.205 inch female and.200 inch across flats.
Weight is the honest trade-off. At 6 pounds, it is still a heavy blade to hold out at arm’s length, so a long session wears on your arms. Durability feedback also splits, which is normal for a metal blade taking real abuse. The verdict is simple: the higher-rated, higher-count hedge pick on this page, and the one most likely to still be cutting in a decade of seasons.
Why it takes the top hedge slot
- 22-inch double-sided blades with ¾-inch gaps for thicker growth
- 0-135° articulating head reaches tops and shoulders without a ladder
- Full metal case built for heavy-duty hedging
- 2-year limited warranty, and works across Stihl, Ryobi, and Husqvarna 128LD powerheads
What to accept before buying
- 6 pounds of blade out at arm’s length is tiring on long jobs
- Durability feedback is mixed, so keep the blade clean and the metal dry
- 1-inch coupler and square drive shaft required
The one to reach for: Anyone with a heavy hedge load who wants the most-proven 22-inch blade on the page.
Only skip if: Your arms are done after ten minutes of overhead work.
Know the Specs
Cutting Width
Cutting width is how much material the tool clears in one pass — the full blade span on an edger or hedge attachment, stated in inches. A 7.5-inch edger blade slices a narrow channel along concrete, while a 22-inch hedge blade sweeps a much wider face of growth. Wider is not automatically better: a long blade adds weight out at arm’s length, so match the width to what you trim most.
Coupler and Drive Shaft
The coupler is the collar on your powerhead where the attachment locks in, and the drive shaft is the spinning rod that carries power from the engine to the tool. Most attachments here ask for a 1-inch diameter tube with a square-shaped drive shaft connector. If your powerhead has a different coupler size or a splined shaft, the tool will not seat. Check both before ordering.
Blade Gap and Cutting Capacity
On hedge attachments, the blade gap is the opening between the teeth — how thick a branch the blade can take. The TPH720 runs 7/16-inch gaps and the AH721 runs ¾-inch gaps, which changes how the tool handles softer growth versus thicker stock. Cutting capacity works the same way on the 16-inch model, which handles up to 0.75 inches.
Bump Feed vs Fixed Line
A bump-feed head releases fresh line when you tap the spool on the ground, so you keep trimming without stopping. A fixed line head uses pre-cut lengths that insert by hand — quicker to reload, but you stop to fit new segments. Both spool replacements here install in seconds, and the kit with 0.095-inch line ships three spools plus a cap and spring.
Common Questions
Will this edger attachment work on my battery-powered Troy-Bilt trimmer?
How do I know which Troy-Bilt trimmer models the spool replacements fit?
What is the difference between the TPH720 and the AH721 hedge attachments?
Can I use a 16-inch hedge attachment instead of a 22-inch blade?
What coupler size do these Troy-Bilt attachments need?
Is a fixed line head or a bump-feed head easier to reload?
How can I tell if my Troy-Bilt trimmer is attachment-capable?
What size trimmer line does the spool kit use?
Why does the flexible strimmer attachment cut in a different direction?
Do these attachments come with a warranty?
The Bottom Line
For most gas-powered Troy-Bilt owners, the troy bilt weed eater attachments pick that delivers the most day-to-day use is the Trimmer Plus 41BJLE-C902 Edger Attachment — a 7.5-inch steel blade on a wheeled boom that will tidy every walkway you own. If hedging is the real job, the TrimmerPlus AH721 brings 22 inches of ¾-inch-gap blade and the strongest track record of any hedge option here. And if your trimmer head is simply worn out, the Replacement Spool for the TB22 family is the lowest-stakes fix on the page. My one nudge: measure your coupler and write down your model number before you order anything — that five-minute check is the difference between a tool that snaps on and a return label.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





