Stampede bodies are not interchangeable — 3651X fits both 2WD and Stampede VXL, while the clipless 9079X works only on the current 4X4 Brushless.
Traxxas spreads the Stampede name across the 2WD XL-5, 2WD Brushless, a legacy 4X4, the 4X4 BL-2s, and the current 4X4 Brushless, and each family latches its body down its own way. Order by drivetrain generation rather than badge, and match every part in the Traxxas Stampede body compatibility and fitment guide to your own model number, not a product photo. Three details settle it: drivetrain family, mount system, and whether the listing includes hardware.
Which Stampede Body Fits Your Truck?
Fit follows the drivetrain family first. A conventional 2WD shell such as the 3651X also fits the Stampede VXL, and clipless assemblies are built around one chassis and one mount set — nothing crosses from 2WD to 4X4 on looks alone.
- Stampede 2WD and VXL, clip style. The clear 3617 body needs part 3614 to mount.
- Stampede 2WD XL-5, clipless. The 3620-RED shell arrives assembled with front and rear body mounts already on it.
- Stampede 2WD Brushless, clipless. The 13611-ORNG body is tagged to model 136454-4 and ships with the grille, tailgate protector, hood vents, and mounts installed.
- Stampede 4X4. Part 9015 is the front and rear body-mount set, stock on the 4X4 BL-2s (67154-4) and 4X4 Brushless (67454-4). The 9079X clipless ProGraphix shell is listed as not compatible with legacy Stampede 4X4 models.
List prices come straight from Traxxas and can change; the fitment column does not.
| Part | What It Fits | List Price |
|---|---|---|
| 3651 red body (also sold as 3651X) | Stampede 2WD and Stampede VXL; no trimming or drilling | $39.95 |
| 3620-RED clipless body | Stampede 2WD XL-5; front and rear mounts included | $44.95 |
| 13611-ORNG clipless body | Stampede 2WD Brushless, model 136454-4 | $59.95 |
| 13611X ProGraphix body | Stampede 2WD Brushless, model 136454-4 | $44.95 |
| 13611 clear body | Stampede 2WD Brushless, model 136454-4 | $34.95 |
| 13641 reinforcement set | Stampede 2WD | $10.00 |
| 9015 body mounts | Stampede 4X4 BL-2s 67154-4 and 4X4 Brushless 67454-4 | $18.00 |
| 3934 heavy-duty clips, 12 | Conventional post-and-clip bodies | $3.00 |
Mounts, Hardware, And What Doesn’t Come In The Box
Most fitment failures happen after the shell is chosen. A clipless body needs clipless mounts and latch hardware on the chassis, and several Traxxas bodies ship as shells only — cage, latches, and skids cost extra.
Traxxas sells the mount side separately: 3619 covers conventional front and rear adjustable mounts, 3619X covers clipless latch hardware, and 3614X covers clipless front and rear body mounts. Buy a clipless shell for a clip chassis and you own two problems instead of one.
The 9079X is the clearest trap: a fully trimmed, paint-ready clipless body for the 67454-4, with its body cage, clipless latches, and protective skids all sold separately. Traxxas states plainly that it does not fit legacy Stampede 4X4 models.
Finish level matters too.
To compare finished looks before committing, see our tested Traxxas Stampede body roundup, and Traxxas publishes the full application list on the Stampede 2WD Brushless bodies parts page for model 136454-4.
Four Checks Before The Shell Meets The Chassis
Run these in sequence and a wrong part gets caught on the listing instead of on the workbench.
- Read the model number off the truck’s label or box. Three verified examples that all say Stampede: 136454-4, 67154-4, and 67454-4. They do not share bodies.
- Look at the chassis and settle clip versus clipless. A clipless shell does not convert a conventional chassis on its own.
- Confirm the listing includes the mounts.
- Test-fit with no force. Posts or latch points should engage fully, wheels should clear the arches through full suspension travel, and the shell should not touch the tires, suspension arms, shocks, bumpers, or drivetrain.
Seated correctly, the shell drops onto its posts and the arches stay clear at full compression. Fitment data covers physical mounting only — radio, battery, motor, and ESC compatibility are a separate question.
Common Questions
Can A 4X4 Stampede Body Go On A 2WD Truck?
Not as a straight swap. The current 4X4 clipless shell, part 9079X, is built for model 67454-4 and needs its own cage, latches, and skids, while 2WD clipless bodies such as the 3620-RED come with 2WD mounts already fitted. Wheel arches, mount spacing, and latch points differ between families, so treat any cross-family swap as a custom project needing measuring and new hardware.
Do Stampede Bodies Come With Body Mounts?
Sometimes, and the listing says which. The 3620-RED clipless shell arrives assembled with front and rear body mounts, and the 13611-ORNG ships with mounts plus a grille, tailgate protector, and hood vents installed. The 9079X is the opposite case, since cage, latches, and protective skids are extra. The clear 3617 body needs part 3614 before it will mount at all.
Is A ProGraphix Body Ready To Run?
Closer than a clear shell, but not always finished. ProGraphix bodies like the 13611X and 9079X arrive trimmed and painted in the main colors, though Traxxas parts documentation notes a final color coat may still be needed on some. A clear body such as the 13611 or 3617 is unpainted and needs prep, paint, and decals before it goes on the truck.
Sources
- Traxxas. “Stampede 2WD Brushless (136454-4) — Bodies.” Official parts finder used for body applications and list prices.
- Traxxas. “Stampede 2WD Brushless (136454-4) — ProGraphix Bodies.” Supports the finish-level notes on ProGraphix shells.