Most pickup owners are best served by a 40–55 gallon transfer tank, while 75–100 gallons suits frequent jobsite or long-route use.
That single number explains why bed volume is the wrong starting point — the right tank size comes from fuel demand, real payload, and the space your bed actually has left.
Work the sizing in the right order and the answer usually falls out on its own.
How Do You Calculate The Right Tank Size?
Start with the gallons you burn between dependable refueling points, then let payload and bed space veto anything that doesn’t fit.
- Estimate required gallons. Divide planned miles by your truck’s real-world mpg, not the window-sticker figure. A truck that averages 13 mpg on a 260-mile loop needs about 20 gallons just for the run.
- Keep a reserve. Don’t plan on draining the tank to its nominal capacity every trip; leave headroom for detours and idle time.
- Check the physical fit. Measure the tank against wheel wells, cab clearance, tonneau covers, toolboxes, gooseneck hardware, and tie-down points. Manufacturers build rectangular, square, vertical, column, and L-shaped tanks precisely because beds differ.
- Run the loaded weight. Diesel runs roughly 7–7.5 lb per gallon and gasoline about 6–6.3 lb per gallon. Add the tank, pump, hose, and mounting hardware, then compare the total against your truck’s payload rating and axle limits. The certification label on the door jamb and the owner’s manual are the authority.
- Confirm fuel compatibility. A tank approved for diesel is not automatically rated for gasoline. Verify the manufacturer’s stated fuel type, pump rating, seals, vents, and electrical requirements.
- Follow the manufacturer’s mounting instructions. Bed rails and light-duty cargo straps aren’t a mounting system unless the tank maker specifically says they are.
Once you know your target capacity, comparing build quality across the popular models matters as much as the number — our tested roundup of transfer tanks for pickups covers the common sizes side by side.
What Do Common Tank Sizes Cost?
| Capacity | Example Model | Listed Price |
|---|---|---|
| 40 gal | BCI Fabrication FT40 (12-gauge steel) | $1,070.00 |
| 45 gal | UWS TT-45-R-T-P | $875.95 |
| 50 gal | UWS TT-50-L-T-P | $1,101.95 |
| 50 gal | WeatherGuard 359-5-01 (black steel) | $1,434.00 |
| 80 gal | RDS 71793 (bright aluminum) | $1,102.52 |
| 85 gal | UWS TT-85-COMBO | $1,584.95 |
| 100 gal | Mills rectangular steel (tank only) | $969.00 |
| 150 gal | Better Built 37224243 | $1,199.00 |
| 200 gal | Better Built 37224244 (white steel) | $1,599.00 |
Those are retailer listings and they move. Installation, pump equipment, freight, tax, and fuel are separate, and the jump from a bare tank to a combo kit with pump, hose, nozzle, filter, and fill cap can run several hundred dollars more — the Mills 100-gallon, for instance, lists at $969.00 tank-only versus $1,546.00 as a complete kit.
What Legal And Safety Rules Actually Apply?
“Transfer tank,” “auxiliary tank,” and “fuel tank” are separate regulatory classifications, and which one you’re dealing with depends on whether the tank transports fuel, dispenses it into another vehicle, or feeds the engine as a permanently connected system.
DOT compliance is model- and use-specific. A manufacturer claiming a tank meets DOT requirements proves nothing about your particular installation, fuel, or transport setup. Federal rules under 40 CFR 63.1105 also require certain tank trucks and railcars in regulated transfer operations to hold current DOT pressure-test certification or meet vapor-tightness standards.
Never exceed your truck’s payload rating, gross vehicle weight rating, gross axle weight ratings, or bed-structure limits. The most common sizing mistake is buying by gallons alone and discovering the loaded weight or the bed footprint doesn’t work.
Common Questions
Can I Put A Transfer Tank In A Short-Bed Truck?
Yes, provided the tank’s footprint clears the wheel wells and cab. Short-bed-friendly sizes generally run 40 to 50 gallons in rectangular or L-shaped designs. Measure the usable bed length and height first, then confirm the manufacturer lists your bed configuration as compatible.
Does A Full Transfer Tank Count Against Payload?
Yes, and it counts heavily. Fuel, tank, pump, hose, and mounting hardware all count against your payload rating. A 100-gallon diesel tank carries up to 750 pounds of fuel alone, so check the door-jamb certification label before buying that size.
Is A Diesel Tank Safe For Gasoline?
Not automatically. A tank marketed for diesel may not be rated for gasoline, and the difference sits in the pump, seals, vents, and electrical components. Confirm the manufacturer’s stated fuel type before putting gasoline anywhere near it.
Sources
- Electronic Code of Federal Regulations. “40 CFR 63.1105 — Standards for Transfer Operations” Supports the DOT pressure-test and vapor-tightness requirements cited in the legal section.
- Knapheide Parts. “Transfer Tanks — Truck Equipment, Bed Accessories” Source for UWS, WeatherGuard, RDS, and Better Built capacity-and-price listings.
- Elite Truck. “BCI Fabrication 40 Gallon Fuel Transfer Tank — Model FT40” Source for the 40-gallon BCI dimensions, steel gauge, and price.