11 Best Transfer Tanks for Pickups | Stop Hauling Cans Up A Ramp

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

A quick note on sizes: not every pick below is the exact size or number you searched — where the exact one is scarce, the nearest same-type option that serves the same purpose is included so you get real, in-stock choices. Each pick’s actual specs are listed.

You already know the routine: five plastic jugs rattling in the bed, a funnel you keep losing, and diesel on your boots before the job even starts. A transfer tank fixes that in one move — a bed-mounted reservoir with a pump and hose that fills your equipment directly. This list covers eleven real tanks, from aluminum rectangles to poly tanks with built-in 12-volt pumps, so you can match one to your truck bed and your fuel type.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

One thing to know before you read: we used flexible, human-like matching here, so not every pick is the exact number or size you typed into the search bar. The nearest same-type tank that mounts in a pickup bed serves the same job. Every entry below is genuinely a bed-mount transfer tank, and this list of transfer tanks for pickups sorts them by what they actually do well.

Top Picks

RDS MFG INC 71083 Rectangular Auxiliary/Transfer Fuel Tank
Best OverallRDS MFG INC 71083 Rectangular Auxiliary/Transfer Fuel Tank4.5+★100+ ratingsA 45-gallon aluminum rectangle that hauls gas without hauling rust along with it. If your truck sees winter roads and you want a tank that won’t rot from the inside out, this is the one to beat.Check price on Amazon
Better Built Steel Transfer Fuel Tank - 36-Gallon, Rectangular, Black
Budget Steel PickBetter Built 36-Gallon Fuel Tank4.0+★300+ ratingsThirty-six gallons of diesel steel with a pump-side shutoff that stops the spill before it starts. Here’s a diesel tank that solves the messiest part of refueling up front.Check price on Amazon
VEVOR Portable Diesel Tank, 58 Gallon Capacity & 10 GPM
Farm WorkhorseVEVOR Portable Diesel Tank, 58 Gallon Capacity & 10 GPM4.0+★300+ ratingsFifty-eight gallons and a 10.6 GPM pump that turns a full tank into a two-fill workday. Picture the tractor sitting in the back forty and the truck sitting at the barn.Check price on Amazon

How To Choose The Best Transfer Tanks for Pickups

Start with the fuel you actually burn, because that single fact knocks out half the field. A tank listed for diesel only is not the one you fill with gasoline, and a tank sold as gasoline-compatible usually wants a specific setup. Once fuel type is settled, the rest — capacity, material, pump or no pump — falls into place fast.

Match the tank material to your climate

Aluminum tanks are sold on one promise you can verify in the listing: no rusting. That matters if your truck lives outside through winter road salt. Steel tanks are heavier and often cheaper to build into odd shapes, but the listing needs to be clear about finish and coating before you trust one to a wet climate. Polyethylene (a thick molded plastic) shrugs off dents and UV, and it never rusts at all.

Decide if you want a pump built in

A bare tank with threaded bungs (the reinforced openings where you screw in fittings) is a blank canvas — you add your own pump later. A tank with an integrated 12-volt pump and hose is a refueling station on day one. The trade-off is straightforward: integrated setups cost more up front and put the pump inside the tank’s footprint, while bare tanks let you pick your own flow rate and nozzle.

Check the footprint against your bed

A 58-gallon poly tank and a 45-gallon aluminum rectangle occupy completely different spaces, and one may fight your fifth-wheel hitch or toolbox. Measure the usable length, width and height of your bed before you buy. Then check how the tank anchors — mounting tabs, ratchet-strap recesses, or a bolt kit.

Side-by-Side Comparison

Model Best For Capacity Material Stated Weight Amazon
RDS MFG 71083 Rectangular★ Best Overall Rust-free gas auxiliary work 45 gallons Aluminum 42 pounds Amazon
Better Built 29211584 SteelBudget Steel Pick Budget diesel with auto shutoff 36 gallons Alloy steel 40 pounds Amazon
VEVOR 58 Gallon DieselFarm Workhorse High-volume farm refueling 58 gallons LLDPE 65.5 pounds Amazon
BreAro 58 Gallon Diesel Fast-flow diesel on a budget 58 gallons HDPE — Amazon
Dee Zee DZ92556NSB Heavy steel bed anchoring 128 liters Alloy steel 70 pounds Amazon
CAMMOO 58 Gallon Fast transfer with lock and straps 58 gallons LLDPE and HDPE 68.8 pounds Amazon
Jobox Crescent 50 Gallon Dual-fuel square steel build 50 gallons Alloy steel 85 pounds Amazon
Trailfx 37024153 Vertical Space-saving vertical aluminum 36 gallons Aluminum — Amazon
RDS MFG 72771 Long-trip diesel capacity 60 gallons Machined aluminum 91 pounds Amazon
JohnDow JDI-AFT58 Premium all-in-one poly station 58 gallons Polyethylene — Amazon

Detailed Reviews

★ Best Overall

1. RDS MFG INC 71083 Rectangular Auxiliary/Transfer Fuel Tank

Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.

45-gallon aluminumNo rusting

A 45-gallon aluminum rectangle that hauls gas without hauling rust along with it.

If your truck sees winter roads and you want a tank that won’t rot from the inside out, this is the one to beat. It holds 45 gallons and it’s built from aluminum — the listing’s blunt promise is “NO RUSTING,” which is exactly the fear that keeps people away from steel tanks in wet climates. Fully welded seams back that up, so the joints aren’t the weak leak point you might expect.

Buyers keep coming back to one thing: build quality. Review pages mention it most, with installation ease a distant second. This tank feels well made, and buyers report it works great as both an auxiliary reservoir and an on-board transfer station for a truck. It also adds real capacity without much weight: at 42 pounds it holds 45 gallons against the Better Built steel tank’s 36, and its aluminum structure won’t rust.

The honest catch: gasoline use here is conditional. The listing allows gas auxiliary fueling only if you siphon from the top of the tank using an electric fuel pump — so a gas setup means buying and plumbing a pump separately. Budget for that, and this tank is a lifetime piece of bed hardware. It’s the top pick for a reason: quality is the recurring theme across the reviews, and it holds up as the strongest all-rounder on this list.

What racks up the points

  • Aluminum construction explicitly sold as rust-free — a real advantage over steel in salty winters
  • 45 gallons on a 42-pound tank keeps payload math friendly
  • Fully welded seams reduce joint leak risk

Where it asks more of you

  • Gasoline needs a siphon-from-top electric pump setup, sold separately
  • Bare tank — no pump, hose, or nozzle included

Built for: the buyer who wants a rust-proof, weld-tight gas auxiliary tank and doesn’t mind adding their own pump.

Worth pausing on: if you want pump-and-hose in the box, a poly all-in-one will save you the extra sourcing.

Budget Steel Pick

2. Better Built 36-Gallon Fuel Tank

Auto shutoffLockable cap

Thirty-six gallons of diesel steel with a pump-side shutoff that stops the spill before it starts.

Here’s a diesel tank that solves the messiest part of refueling up front. Its overfill restriction shuts off automatically at the pump, so you aren’t standing there watching the neck for the gurgle. The 2-inch flush-mounted inlet and outlet bungs let fuel move fast, and a lockable cap keeps curious hands out of your supply. Inside, baffles add strength and stop the contents from shifting on a hard turn.

You feel the build in the numbers: at 40 pounds, it’s a manageable lump to slide into the bed alone. The Dee Zee’s 70 pounds is a two-person lift if you want to be sensible about your back.

The trade-off is durability at the fittings. Steel tanks take road abuse, and recurring notes mention the fill cap and mounting tabs arriving bent or failing over time. One owner found missing hose and clamp hardware in the box, so check everything the day it lands. Its diesel-only spec also rules out gasoline. For a diesel work truck on a tight budget, the auto shutoff alone earns it a spot.

Where the money goes: the automatic fuel shutoff and lockable cap are features you normally hunt for on pricier tanks — you get both on an alloy steel body with a mounting kit and rubber bushings included.

Good match if: you run diesel, want spill-free filling, and can inspect the mounting hardware on arrival.

Pass it by if: you need gasoline capability — this one is spec’d for diesel only.

Farm Workhorse

3. VEVOR Portable Diesel Tank, 58 Gallon Capacity & 10 GPM

10.6 GPM pumpDuplex filter

Fifty-eight gallons and a 10.6 GPM pump that turns a full tank into a two-fill workday.

Picture the tractor sitting in the back forty and the truck sitting at the barn. This tank closes that gap. A 12-volt transfer pump pushes diesel at 10.6 gallons per minute, and the mechanical fuel gauge on the tank tells you when to top off before you start the round trip. The safety fill capacity is 52 gallons against a 58-gallon maximum, so you leave headroom instead of brimming it.

The specs that matter are real here: 140 watts of output from the pump, a 13.1-foot rubber hose, and a duplex filter setup—a front-end filter catching large debris and a premium outer filter pulling out finer particles like metal and colloids before they reach your equipment. The automatic shutoff nozzle stops the flow when the tank is full, and the rotatable adapter fights hose kinking. Grooves on the tank make it secure to transport, and the integrated forklift pocket lets you lift it onto a truck when full.

Owners say a 2004 RAM 3500 gets two complete fill-ups out of a single load — that’s the kind of real-world math that makes the case. The catch is long-term durability: the pump and polyethylene body earn mixed marks over time, and some report leakage at connections. Tighten every fitting on arrival and check the hose ends.

Why owners keep it busy

  • 58-gallon capacity with 52-gallon safe fill — real range for a farm or fleet
  • 10.6 GPM at 140W moves diesel quickly
  • Duplex two-stage filtering keeps fine debris out of your equipment

What to keep an eye on

  • Durability feedback is mixed over the long haul
  • Leakage at connections comes up — check fittings on arrival

Buy this when: you refuel tractors, trucks, or gear daily and need volume plus filtration in one portable unit.

Think twice if: you want a set-and-forget tank for years — inspect and re-tighten connections regularly.

Fastest Flow

4. BreAro 58 Gallon Diesel Transfer Tank with 12V Pump

10.6 GPMBuilt-in filter

A 58-gallon diesel station that wants to be moved — pump, hose, and forklift pockets included.

Some tanks are meant to live bolted down. This BreAro is built to travel. Its integrated forklift pocket lets you lift it onto a vehicle when full, and the empty tank is light enough to handle by hand. The 58-gallon capacity means you stop hauling multiple small containers around job sites, farms, and equipment yards.

The pumping system is the centerpiece. A 12-volt pump delivers up to 10.6 gallons per minute, and the battery cable runs 13.1 feet so you can reach your power source without moving the tank. The automatic fueling nozzle shuts off when the tank is full, and the 360-degree connector cuts down on hose twist. A built-in fuel level indicator keeps you from guessing. Construction is high-density polyethylene — a tough molded plastic that resists scratches, dents, and weather across heat, rain, and snow.

It’s one of the faster-flowing tanks on this list, sharing the 10.6 GPM pump spec with the VEVOR above, and the polyethylene shell shrugs off the dings a steel unit would carry. There’s no mounting hardware in the spec sheet, so plan a strap or bracket setup if you want it locked to the bed rather than shifted around. For mobile fueling across multiple sites, the all-in-one package is hard to argue with.

What you get in the box: pump, automatic shutoff nozzle, 13.1-foot hose, and a fuel gauge — an entire refueling station in one tank.

Reach for this if: you refuel equipment at multiple sites and want to lift the tank on and off with a forklift.

Look elsewhere if: your setup needs it permanently bolted — you’ll be sourcing your own mounting hardware.

Heavy Steel Build

5. Dee Zee DZ92556NSB Transfer Tank

14-gauge steel5 stability baffles

Fourteen-gauge steel with five baffles — built like a toolbox, not a plastic jug.

If you’ve ever watched a plastic tank walk itself around the bed on a rough road, this is the answer. Heavy duty 14-gauge steel forms the body, and a radius curve eliminates the weld pressure points where cracks usually start. Five stability baffles plus a drain plug keep the fuel from sloshing into a wave that fights your steering, and mounting tabs let you bolt it directly to the truck bed instead of strapping it down.

The spec lists capacity as 128 liters, the listing’s own figure for this tank. It’s got the installation and fit story buyers want: the tank’s footprint lands where it should, and the configuration is straightforward. The weight, though, is the headline trade: 70 pounds empty versus the Better Built’s 40 pounds, so get a second set of hands when you set it into the bed.

What takes the shine off is weld quality and durability over time — that’s the recurring theme for steel tanks in this class, and the drain plug and seams are where to look first. Leakage at fittings comes up for some owners. If you need a tank that stays put through years of rough dirt roads, though, the baffles and tabs here earn their keep.

The argument for steel

  • 14-gauge steel with radius-curved body for weld strength
  • Five stability baffles plus drain plug control slosh
  • Mounting tabs bolt it to the bed

What to inspect closely

  • 70 pounds empty isn’t a solo lift
  • Weld quality and durability draw mixed reports over time

Built for: the driver who wants a permanent, bolted-down steel tank that hangs on through rough terrain.

The catch: it’s the heaviest tank here — if you swap tanks between trucks, a lighter unit is friendlier.

Most Feature-Rich

6. CAMMOO Real 58 Gallon Portable Diesel Fuel Transfer Tank

13.2 GPMCombo lock

A 58-gallon poly tank with a faster pump, a combo lock, and DOT compliance in the spec sheet.

You get the strongest all-around feature set of any poly tank in this grouping. For starters, the tank hits the advertised 58 gallons rather than drinking off a chunk of it as headspace. It meets DOT requirements, and the flame-retardant LLDPE-plus-HDPE blend resists UV, rain, snow, wear, and corrosion, with a 6.5mm tank wall that reaches up to 12mm at the thickest part.

The pump story is where it pulls ahead in the marketing: the pump-only spec is 13.2 GPM versus 10.6 GPM on competing poly tanks, and the lab-tested flow with the full hose-and-filter kit is 9.25 GPM versus a 7.9 GPM comparison figure. The diesel-only 260-watt motor has overheat protection, and the 12V-DC requirement is explicit. A dual-layer filtration system catches large debris first, then finer particles, and a built-in fuel gauge keeps you informed.

The extras that make it daily-friendly: a combo lock for fuel security, ratchet straps to hold the tank steady in your bed, forklift pockets, and molded hand grooves for repositioning. The nozzle is aluminum alloy to reduce static, auto shuts off to prevent overfill, and has a lock-in latch. The owner’s manual will require a careful read — the 3rd latch position is the only one to use, and you turn off pump power within 2-3 minutes after shutoff. Operating temperature is 14°F to 104°F with fuel inside, which is where to check if you work in deep cold.

The strongest spec on the sheet: 13.2 GPM pump-only flow and a DOT-compliant body make it a standout for anyone moving diesel at volume.

Pick this if: you want the fastest pump in the poly-tank class with locks, straps, and filtering already included.

One thing to know: the 12V-DC-only spec means no higher voltage, and the manual’s shutoff timing needs following.

Dual-Fuel Square

7. Jobox Crescent 50 Gallon Transfer Tank

Gas or diesel50 gallons

Fifty gallons of square steel that handles both gas and diesel — a rarity on this list.

The fuel-type spec sets this one apart. Most tanks here are locked to diesel or locked to gas, but the Jobox lists both diesel and gasoline as acceptable. It holds 50 gallons in an alloy steel body painted for exterior duty, and it uses internal baffles for extra strength plus slosh control while you drive.

The hardware is where it earns its keep. Two-inch NPT reinforced bungs let you mount a pump on either side of the tank, so you aren’t stuck with the pump pointing the wrong way against your tailgate. Built-in lifting rings help when you’re moving an empty tank, and heavy-duty brackets secure it to the truck bed. A lockable filler cap and coupler prevent excessive pressure buildup. Fit is listed as universal.

The trade-off is weight — 85 pounds empty is the heaviest figure on this list, so plan on a lift assist and a fixture you won’t move often. It’s the answer for the mixed-fleet owner who needs one tank that tolerates both fuels and wants pump mounting flexibility on either side.

What stands out

  • Accepts both diesel and gasoline — unusual flexibility here
  • 2-inch NPT bungs on both sides allow pump mounting either direction
  • Internal baffles plus heavy-duty bed brackets for secure transport

Budget for this

  • 85 pounds empty is a two-person lift
  • Bare tank — pump and nozzle are separate purchases

Best for: the mixed-fleet owner who runs both gas and diesel and wants one steel tank that can handle either.

Skip unless: you can give it a permanent home — 85 pounds makes it poor for frequent swapping.

Vertical Space Saver

8. Trailfx 35 Gallon Fuel Transfer Tank

Aluminum tread plateVented coupler

A vertical-footprint aluminum tank that stands tall and steals less bed length.

Bed space is the constant battle, and this one solves it by going up instead of out. The 37024153 stands vertically, so it fits in the footprint a horizontal rectangle would crowd out — handy if you’re running a fifth-wheel or a toolbox behind the cab. The technical spec lists 36 gallons, and the body is machined from extra heavy-duty aluminum tread plate — the textured diamond-pattern sheet that shrugs off scrapes. It’s built for diesel according to its fuel type listing, and the fit is vehicle-specific.

The hardware included is straightforward: a lockable cap, a coupler that allows venting while keeping pressure from building, and a recessed drain plug for emptying it without spilling on your boots. Aluminum construction means no rust problem, which is a real benefit for a tank that lives outdoors year-round.

The catch is the warranty — 30 days is short compared to the manufacturer warranties on other tanks here, so inspect it completely at delivery. And a vertical tank holds fuel higher up, which some drivers prefer for a gravity-fed line and others don’t want for stability. For a work truck short on floor space, though, a vertical aluminum tank is the smart geometry.

Why the shape matters: vertical mounting preserves bed length for cargo while the aluminum tread plate handles outdoor exposure without rust.

Right for you if: bed length is precious and you want a rust-free vertical tank for diesel.

Watch out: the 30-day warranty window means a thorough inspection the day it arrives.

Long-Trip Capacity

9. RDS MFG INC 72771 Fuel Tank

60 gallonsLocking fill cap

Sixty gallons of machined aluminum for the driver who hates planning around fuel stops.

Most tanks here top out in the 50s. This one goes to 60 gallons — the largest usable capacity on the list — and it’s built from aluminum, so it won’t rust. The finish is listed as machined, and a locking automotive-style fill cap keeps your supply secure. Designed for exterior areas and listed as a universal fit, it goes onto a truck bed without a model-specific bracket hunt.

Owners run these under tonneau covers and report a clean fit, which is the real win: 60 gallons of extra range without breaking your cover’s seal. Gravity-feed setups work well with it, and long RV trips are where this capacity earns its keep. For a diesel truck doing miles between stations, that much reserve changes the whole rhythm of a trip.

The honest limit here is weight and fuel capability. At 91 pounds empty it’s the second-heaviest tank on this list, so think through how often you’ll move it. And fuel capability draws the most negative comment of anything about this tank — the specifics of how you plumb it matter, so read the listing carefully against your intended pump setup before you commit.

The range argument

  • 60 gallons — the largest capacity here
  • Aluminum body with machined finish and locking fill cap
  • Universal fit and low-profile enough to sit under a tonneau cover

Weigh these carefully

  • 91 pounds empty makes it a permanent-install piece
  • Fuel capability is the most-discussed caveat — confirm your plumbing setup first

Made for: long-haul diesel drivers and RV towers who want maximum reserve under a closed cover.

Weigh it against: a lighter tank if you plan to pull this one in and out often.

Premium All-In-One

10. JohnDow Industries JDI-AFT58 Diesel Transfer Tank

Built-in 12V pumpAuto shutoff nozzle

The turnkey diesel station: 58 gallons, a 10 GPM pump, and a lockable cover on one poly tank.

If you want the whole thing sorted on day one, this is the one. The 58-gallon tank is rugged linear polyethylene, and the built-in 12-volt pump delivers diesel at 10 gallons per minute. An automatic shutoff nozzle stops the flow when the tank is full, so you aren’t watching the neck for a spill. A protective, lockable cover keeps the pump and fittings out of the weather and away from wandering hands.

The practical bits are nailed down. Integrated forklift pockets let you lift the tank onto a truck when it’s full, and integrated recesses are built in for securing it with ratchet straps during transport—so the anchor points are part of the tank, not an afterthought. The power cable runs 13 feet and the delivery hose is 13 feet, giving you room to reach the truck or the tractor without dragging the tank alongside.

The trade-off is straightforward: it’s a premium all-in-one, so you’re paying for the pump, nozzle, and cover to already be matched and installed. If you’d rather pick your own pump, a bare tank will save you the integrated cost. But for a fleet or a farm that wants to fill and go, this is the least fuss on the list.

Choose it for: a no-assembly diesel refueling solution with a protected, lockable pump bay.

Only if: you’re ready to commit to an integrated system — swap-in-your-own-pump buyers should look at a bare tank.

Know the Specs

Capacity and usable fill

Capacity is the headline number, but the usable fill can sit below it. Tanks often leave headspace for expansion, so a 58-gallon tank might have a 52-gallon safety fill. Plan your range on the lower figure, not the big one on the label, or you’ll overestimate how far a load goes.

GPM and pump flow

GPM means gallons per minute — how fast the pump moves fuel from tank to equipment. A 10.6 GPM pump moves 10.6 gallons every minute, so a 50-gallon fill takes under five minutes instead of the better part of an hour with a hand pump. Flow drops when you add filters, a longer hose, or a smaller nozzle, so the pump-only spec is a ceiling, not a promise at the nozzle.

Bungs and couplers

A bung is the threaded opening welded into the tank where a pump or fitting screws in. A 2-inch NPT bung is a standard size, so it accepts common pump fittings. A coupler that allows venting lets air in as fuel leaves, preventing pressure or vacuum from building inside the tank.

Baffles and stability

Baffles are internal walls that break the fuel into smaller chambers. Without them, a half-full tank sloshes like a wave, pushing your truck around on curves and turns. More baffles mean less slosh and a more stable ride, especially on a partially filled tank.

Common Questions

Can I put gasoline in a tank listed for diesel?
No — treat the fuel-type spec as a hard limit. The diesel-only tanks here (the Better Built steel unit, the VEVOR, the CAMMOO, the JohnDow) are not listed for gasoline. The Jobox Crescent lists both diesel and gasoline, and the RDS aluminum tanks allow gasoline only if you siphon from the top with an electric fuel pump. Read each listing’s own fuel note before filling.
How do I know if a transfer tank will fit my pickup bed?
Measure your usable bed length, width, and height first, then check the tank’s listed dimensions. Pay attention to the gap between the wheel wells — a low, wide tank like the RDS 71804 is built to sit there, while a tall poly tank takes a different footprint. Also check for a fifth-wheel hitch or toolbox that eats space.
Do transfer tanks come with a pump, or do I buy one separately?
It depends on the model. The VEVOR, BreAro, CAMMOO, and JohnDow tanks include a built-in 12-volt pump and hose. The RDS aluminum tanks, the Better Built steel tank, the Dee Zee, the Jobox, and the Trailfx are bare tanks — you source and install your own pump. A bare tank with 2-inch NPT bungs accepts common pump fittings.
Is a steel or aluminum tank better for a truck bed?
Aluminum tanks are sold on a no-rusting claim, which matters if your truck lives outdoors through wet winters. Steel tanks are strong and often heavier — the Dee Zee is 70 pounds empty and the Jobox is 85. Polyethylene tanks resist dents and UV and never rust at all. Match the material to your climate and how permanent the install will be.
What does GPM mean, and how fast is 10.6 GPM?
GPM means gallons per minute, the pump’s flow rate. A 10.6 GPM pump moves 10.6 gallons every minute, so a 50-gallon fill takes under five minutes instead of the better part of an hour with a hand pump. The pump-only number is the ceiling — filters, hose length, and nozzle size can bring the real flow down, as the CAMMOO’s 13.2 GPM pump-only spec versus its 9.25 GPM tested figure shows.
Why does my tank hold less than it says?
Headspace. Tanks leave room for fuel expansion, so the safe fill sits below the maximum. The VEVOR lists a 58-gallon maximum and a 52-gallon safety fill. The RDS 71804 lists 37 gallons but real usable capacity lands around 32.5 gallons. Always calculate range on the usable figure.
How do I secure a transfer tank in the bed?
Use the anchor method the tank was built for. The Dee Zee and Jobox use mounting tabs and heavy-duty brackets that bolt to the bed. The CAMMOO and JohnDow provide ratchet-strap recesses molded into the tank. The BreAro has no mounting hardware listed, so plan your own strap or bracket setup.
Can I leave a transfer tank full in the truck bed between jobs?
That depends on the tank and the weather. The CAMMOO lists an operating range of 14°F to 104°F with fuel inside, so extreme cold or heat is worth planning around. A full poly tank is heavy — the VEVOR weighs 65.5 pounds empty — so decide whether the fuel stays aboard or gets transferred out before you park it for long.
Do I need to filter diesel before it goes into my equipment?
A filter protects the pump and the equipment downstream. The VEVOR uses a duplex filter — a front-end layer for large debris and an outer filter for finer particles like metal and colloids. The CAMMOO uses a dual-layer filtration system for the same reason. Both are worth cleaning or replacing on a schedule rather than running until flow drops.
What is a bung, and which size do I need for a pump?
A bung is the reinforced threaded opening in the tank where a pump or fitting screws in. Several tanks here use 2-inch NPT bungs, a common size that accepts standard pump fittings. The Jobox runs 2-inch NPT reinforced bungs on both sides so you can mount a pump on either side. Check your pump’s fitting size against the tank’s bung before ordering.

The Bottom Line

For most buyers, the transfer tanks for pickups winner is the RDS MFG 71083 because it pairs a 45-gallon aluminum body that won’t rust with fully welded seams, and build quality is the quality owners keep returning to. If you want a pump and hose in the box on day one, the JohnDow JDI-AFT58 takes the fuss out of the install. And for maximum reserve under a closed tonneau cover, the RDS MFG 72771 and its 60 gallons is the one to reach for.

Whichever you pick, match the fuel type to the tank, check the usable capacity rather than the label, and inspect the mounting hardware the day it arrives. Those three checks catch most of the surprises before they cost you a job.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top