How to Measure Your Foot for Wide Shoes | Get the Width Right

Measuring for wide shoes means standing with full weight on both feet, recording heel-to-toe length, arch length, and the widest forefoot width — then fitting the larger foot, because “wide” means something different at every brand.

A size 10 wide from one maker can fit like a size 10 regular from another. That single fact is why so many people order wide shoes, wait for the box, and send it back. Getting the numbers right at home takes about five minutes and a sheet of paper, and it cuts the guesswork out of the whole order.

The steps below follow the Brannock Device Company’s own fitting instructions, plus the paper-on-the-floor version for anyone without a device. Read through once, then measure.

Why Does “Wide” Mean Something Different at Each Brand?

Retail width labels are set by the manufacturer, not by a shared standard, so “wide” and “extra-wide” can represent different actual widths from brand to brand and even model to model. Brannock advises contacting the retailer or maker directly for a model-specific width recommendation.

The US Brannock system itself has nine widths: AAA, AA, A, B, C, D, E, EE, and EEE. Each step between them is 3/16 inch, and the width a given letter represents changes with foot length — a D on a size 6 is not the same physical width as a D on a size 11.

Even a shoe with the right nominal width can feel tight. Toe-box shape, upper material, seam placement, and internal construction all change how a shoe fits on your foot. Treat your measured width as a starting point, not a universal conversion chart.

How Do You Measure at Home With Paper and a Pencil?

An at-home trace gives you a workable approximation of both length and width, though it will not capture arch length the way a calibrated device does. Do it late in the day or after normal activity, when feet are at their largest from ordinary swelling, and wear the socks you plan to use with the shoes.

  1. Tape a sheet of paper to a hard floor — carpet distorts the trace.
  2. Stand with full weight on both feet. Do not measure seated; non-weight-bearing measurements understate foot size.
  3. Have someone mark the back of your heel and the tip of your longest toe. The longest toe is not always the first toe, so check both.
  4. Mark the widest points on the inside and outside of your forefoot.
  5. Step off and measure heel-to-toe, then the widest forefoot span, in inches.
  6. Repeat on the other foot. Feet commonly differ in size, so use the larger foot’s numbers.

One trap to avoid: don’t pull your socks backward over the toes while measuring. Brannock’s instructions call for socks that stay snug without drawing the toes back, since that shortens the reading.

Measurement What It Tells You Common Mistake
Heel-to-toe length Your base shoe size Measuring to the first toe instead of the longest
Arch length Ball-of-foot placement; use the larger of this and heel-to-toe Skipping it entirely
Forefoot width Starting point for width letter Assuming the brand’s “wide” matches your number
Both feet Which foot to fit Measuring only one foot
Time of day Peak foot size Measuring first thing in the morning
Standing vs. seated True weight-bearing size Measuring while sitting
Sock choice Real-world fit Measuring barefoot for winter boots

What Does a Brannock Device Measure That Paper Doesn’t?

A Brannock device captures length, arch length, and width in one weight-bearing pass, and its instructions are specific about the order. Remove your footwear and seat one heel firmly in the matching heel cup. Stand with equal weight on both feet, toes flat, and read heel-to-toe at the longest toe.

Then measure arch length separately — from the heel to the ball-of-foot indicator — and compare it with the heel-to-toe number. Generally, the larger of the two determines your shoe size. Brannock’s instructions warn that heel-to-toe alone can produce a poor fit because arch length gets ignored.

Slide the width bar firmly against the widest part of the foot and read the width at the size you just found. Repeat on the other foot and fit the larger one. The device is sold in several versions — men’s, women’s, combination, centimeter, and a children’s model — and they are not interchangeable. A centimeter device returns a shoe size with toe space built in, not a raw foot length, and a UK device reads UK sizing.

Once you have your numbers, the tested roundup of womens wide shoes is a useful next stop, since real fit notes from a specific model beat a generic size chart.

For most people buying one pair, the paper method plus a call to the brand’s sizing line covers the same ground for free. Brannock’s full procedure is documented in Brannock’s fitting instructions.

When Should You Skip Home Measuring?

Home measurement is not a substitute for medical or professional fitting when feet are a health concern. Diabetes, neuropathy, circulation problems, swelling, deformities, persistent pain, or existing pressure injuries all call for professional footwear guidance rather than a paper trace.

For everyone else, the honest limit is this: measurements narrow the field, but they don’t replace trying the shoe. Manufacturing differences and styling mean even a correct number can need compensation. Order from a retailer with free returns, and judge fit at the end of the day when your feet are at their largest.

Common Questions

Should I measure my feet in the morning or at night?

Measure late in the day or after normal activity. Feet swell slightly with ordinary use, so an evening measurement reflects the size your foot reaches during the hours you actually wear shoes. A morning measurement can come out a half size small and lead you to order a shoe that pinches by afternoon.

What if my two feet measure differently?

Always fit the larger foot. A small difference between left and right is normal and very common. Order for the bigger measurement and use the extra room on the smaller foot with a slightly thicker sock or a thin insert, rather than sizing down and squeezing the larger foot.

Is a Brannock device worth buying for home use?

For a household fitting several people repeatedly, the math can work, since a combination device covers men’s and women’s sizing. For a single pair of shoes, it usually isn’t. A paper trace plus the brand’s own width chart and a quick call to their sizing line gets most people to the right size.

Sources

  • Brannock Device Company. “Instructions & Fitting Tips.” Source for the official weight-bearing measuring procedure, arch length guidance, and width bar steps.
  • Brannock Device Company. “Brannock Device Company.” Official product pages listing device models and current prices.
  • Brannock Device Company. “About Us.” Background on the nine-width US system and the 3/16-inch separation between widths.

Scroll to Top