How To Find The Right Whirlpool Washer Parts By Model Number | Match The Suffix

Whirlpool washer parts must be matched to the full model number on the identification label, including the trailing revision character — the plain series name is not enough to pick a compatible part.

Getting the part right the first time comes down to one string of characters printed inside the lid rim, and skipping any part of it is how people end up returning the wrong pump twice.

The good news is that Whirlpool publishes a model-specific parts list for nearly every washer it has sold, and those lists are free. This guide covers where the label hides, how to read it, and how to turn that number into an exact part before you pay for anything.

Where Is The Model Number On A Whirlpool Washer?

Whirlpool’s model and serial number guide places the washer identification label inside, on the rim. Customer Care lists three more spots to check if the rim is worn or unreadable: behind the control panel on the back, inside the lid at the bottom right corner, or on the back of the base frame toward the left.

Open the lid and look along the top edge of the opening first. The label sits flat on that rim on most top-load models. On front-loaders, check the door opening rim and the back panel.

  • Inside the lid rim — the primary location on top-load washers
  • Back of the control panel — visible from behind the machine
  • Inside the lid, bottom right — common on older top-load units
  • Back of the base frame, left side — often overlooked

Photograph the label before you leave the laundry room. Detergent residue and age fade these stickers fast, and a clean phone photo saves a second trip with a flashlight.

Why The Last Character Of The Model Number Decides The Part

The full model identifier includes characters after the base number, and Whirlpool’s repair-parts lists treat those variants as separate machines with separate parts. A washer labeled WTW4855HW and one labeled WTW4855HW0 are not the same entry in Whirlpool’s catalog, and neither is interchangeable with a WTW6157PW0 or a front-load WFW5720RW0.

That trailing character is a revision or configuration code. Different documents, different parts, different machines.

Copy the whole string exactly as printed, letters and digits and the final character. Do not round it off, do not drop the suffix, and do not trust a seller page that lists only the series.

How To Turn That Number Into The Exact Part

Enter the complete model number into Whirlpool’s manuals search to pull the owner’s manual and any available repair-parts list for that exact machine. Both documents name parts, and the repair-parts list is the one that pairs each component with its official part number and illustrated position.

  1. Type the full model number — suffix included — into the search bar on Whirlpool’s manuals and literature page.
  2. Download the model-specific owner’s manual and the repair-parts list when one is published for your model.
  3. Find the failed component by its illustrated position and description in the parts list.
  4. Note the official part number printed beside it, not the name alone.
  5. Search that part number in Whirlpool’s parts catalog, which is separate from the accessories section.
  6. Compare the seller’s compatibility note against your full model number before checkout.

Whirlpool’s repair-parts list for the WFW5720RW0 shows how the document is laid out, with part numbers listed beside each illustrated component.

Once you have the number, sourcing gets easy. If you would rather compare aftermarket and OEM options side by side before ordering, this roundup of tested Whirlpool washer parts lines up the common replacements with their compatible models.

What Goes Wrong When You Skip The Label

Most wrong-part orders trace back to four habits: using only the marketing series name, dropping the final suffix, confusing the model number with the serial number, or trusting a visual match. The serial number identifies your individual unit; the model number identifies the configuration the parts list is built around.

Parts documents also get revised. A part pulled from another brand’s washer or a lookalike Whirlpool model is not a match, whatever the photo suggests.

Keep the old part until the new one is installed. Connectors, mounting points, and hose sizes are the fastest way to catch a mismatch before you are elbow-deep in the machine.

One safety note before any repair: unplug the washer and shut off both water supply valves.

Common Questions

Can I Use A Part From A Similar Whirlpool Model?

Only if the part number matches your own model’s repair-parts list. Whirlpool publishes separate documents for closely related washers, and components like control units and drain pumps often differ between them. A similar-looking machine in the same series is not proof of compatibility. Confirm the official part number against your full model identifier before ordering.

What If The Model Label Is Faded Or Missing?

Check the other three locations: behind the control panel, inside the lid at the bottom right, and on the back of the base frame toward the left. If every label is unreadable, call Whirlpool Customer Care at 1-866-698-2538 with the washer’s serial number and purchase details. The serial alone will not pull a parts list, so the model is what you need to recover.

Does The Serial Number Ever Pick The Part?

No. The model number identifies the appliance configuration and is what Whirlpool’s parts lists are organized around. The serial number identifies your individual unit and matters for warranty claims and service records, not for matching a replacement component. Write down both, but search with the model.

Sources

Scroll to Top