9 Best Whirlpool Washer Parts | Drain Pumps That Fit Right

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

The tricky bit is that Whirlpool builds machines under a dozen brand names, so the part that fits one washer may not fit yours. This guide covers nine replacement parts people actually buy for Whirlpool-family washers, sorted by what each one fixes and which machines it fits.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Before you order anything, copy the model number off the washer lid or door frame and match it against the fit list below — that one step prevents most returns. Every pick here is a genuine or OEM-standard replacement, and the list below covers the best Whirlpool Washer Parts for the three failures that hit most often: draining, filling, and shaking.

Top Picks

OEM Washer Pump W10425238, W10605427
Best OverallOEM Washer Pump W10425238, W106054274.5+★700+ ratingsThe pump that ends a flooded laundry floor for a wide spread of Whirlpool-family washers. Start with the part number, because that is what makes this one the safest bet in the group.Check price on Amazon
TOMOON W10276397 Washer Drain Pump
Budget ChampionTOMOON W10276397 Washer Drain Pump4.5+★500+ ratingsAn entry-level drain pump with an unusually long warranty wrapped around it. What sets this pump apart is the warranty backing, which is stated as 10 years.Check price on Amazon
Beaquicy W11096268 Water Inlet Valve
Fill-Fix PickBeaquicy W11096268 Water Inlet Valve4.0+★750+ ratingsWhen your washer fills at the wrong temperature or not at all, this is the part on the back panel. The inlet valve controls water flow into the tub, and this one has two threaded ports measuring 1.06 inches across.Check price on Amazon

How To Choose The Best Whirlpool Washer Parts

The most common mistake is buying by brand name alone. Whirlpool builds washers that sell as Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, and Inglis — and the same drain pump often serves several of them. What separates a part that works from one that leaks is the part number and the model list, not the logo on the box.

Start with the symptom, then the part number

A washer that won’t drain, hums but won’t spin, or throws an F9 or E1 error usually points to the drain pump. Water that won’t stop filling, arrives at the wrong temperature, or triggers E1, F8, FL, LF, or LO codes usually points to the water inlet valve. A tub that bangs and walks across the floor during the spin cycle points to worn suspension rods. Naming the symptom first narrows you to the right family of parts in one step.

Read the fit list, not the headline

Every good listing prints the washer model numbers it fits — things like WTW7300DW1 or MHW5500FW0. Find your model on that list before you order. If your model appears under a different brand name in the same list, that is normal, because the same pump assembly carries across brands. When you cannot find your model, contact the seller with it before buying.

Genuine OEM versus OEM-standard aftermarket

Genuine Whirlpool parts come from Whirlpool and carry their own warranty, often a year. Aftermarket parts are made to match the original and frequently cost less, and many carry their own warranty terms that can run longer. The honest difference shows up in durability — some aftermarket pumps and valves outlast expectations, and some fail early. Check what the listing promises for warranty before you commit.

Side-by-Side Comparison

Model Best For Part Type Electrical / Flow Spec Fit Notes Amazon
OEM Washer Pump W10425238, W10605427★ Best Overall Whirlpool-family drain failures Drain pump 120 volts Replaces W10605427, W10799064 and more Amazon
TOMOON W10276397 Drain PumpBudget Champion Budget-minded Whirlpool, Maytag, Kenmore owners Drain pump 120V, 60Hz, 85 watts, 0.95A Fits Whirlpool, Maytag, Kenmore, Amana, Roper Amazon
Beaquicy W11096268 Inlet ValveFill-Fix Pick Washers that won’t fill or hit the wrong temperature Water inlet valve 120V 60Hz, two 1.06-inch threaded ports Replaces W11220230, W10632527, W10758829 Amazon
Semzohc W11210459 Inlet Valve Leaks and irregular fill on WTW-series washers Water inlet valve Two threaded ports Fits Whirlpool WTW4616, WTW5000DW1, Kenmore 110 series Amazon
AMI PARTS W10780048 Suspension Rod Kit A tub that shakes and walks during spin Suspension rod kit 23.6-inch rod length 4 rods, 4 balls, 4 bushings included Amazon
AMI PARTS 280187 8181684 Drain Pump Motor Front-load Whirlpool and Kenmore drainage Drain pump motor 110–127V, 60Hz, 85W, 1.4A, 45 L/min Replaces 8181684, 285998, 8182819 Amazon
Whirlpool WP3363394 Genuine OEM Drain Pump Buyers who want the factory part, no substitutes Top-load drain pump 10 liters per minute flow Replaces 3363394, 8235, 64076, 63347 Amazon
TOMOON WPW10730972 Drain Pump Assembly Duet and Maytag 2000/3000/4000 series repairs Pump and motor assembly AC 120V, 60Hz, 80 watts Replaces WPW10730972, W10130913, 8540024 Amazon
Whirlpool W11513255 Genuine OEM Inlet Valve Genuine-part fill repairs with compression fittings Water inlet valve assembly 0.75-inch compression inlet Replaces W11385821 Amazon

Detailed Reviews

★ Best Overall

1. OEM Washer Pump W10425238, W10605427

Our pick — 4.5+★ from 700+ verified ratings; the strongest balance of quality and price.

Replaces 5 Part Numbers120 Volts

The pump that ends a flooded laundry floor for a wide spread of Whirlpool-family washers.

Start with the part number, because that is what makes this one the safest bet in the group. The W10425238 pump also replaces W10605427, W10799064, W10799065, W10903216, and W10918044, so one box covers several different machines. It runs on 120 volts, which is the standard household circuit a washer plugs into. It weighs 2.6 pounds, so it is a solid little unit you can hold in one hand while you work.

A drain pump does one job: push the dirty water out of the tub after the wash and rinse. When it fails, you get standing water, an unfinished spin, or a washer that hums and does nothing. Owners consistently find this one goes in without fuss, and the money-saving angle is real — the listing’s most-repeated praise centers on skipped repair calls, and owners note it drops straight in where the old pump sat. If you want the water gone without paying a technician, this pump is the straightforward route.

The catch that matters is durability, where opinions split. Most pumps hold up well, but drainage and longevity are the two areas where a minority of buyers report trouble, and a slow drain after the swap is more often a hose or filter issue than the pump itself. Check your drain hose routing and clean the filter before you blame the part. It holds a 4.5+ rating, earned largely on its fit list of dozens of Whirlpool, Maytag and Crosley model numbers.

What buyers keep coming back to

  • One part number covers W10605427, W10799064, W10903216 and more, so fewer wrong-part returns
  • Fit list names dozens of Whirlpool, Maytag and Crosley washer models by number
  • 120-volt standard circuit — no adapter or rewiring to worry about
  • Owners routinely report it slotting in as an exact replacement

Where it can fall short

  • Durability is the mixed note — a minority find the pump fails sooner than the original
  • Persistent slow drainage often traces back to a clogged filter or a kinked hose, not the pump

Go with this one if: your washer won’t drain and your model number sits anywhere on its long Whirlpool-family fit list.

Think twice if: your model is not listed — an unlisted machine means a wrong-size housing and a return.

Budget Champion

2. TOMOON W10276397 Washer Drain Pump

120V / 85W10-Year Warranty

An entry-level drain pump with an unusually long warranty wrapped around it.

What sets this pump apart is the warranty backing, which is stated as 10 years. For a part this cheap, that is the headline. The engineering is ordinary but correct: 120 volts, 60Hz, 85 watts, 0.95 amps, and a pump body rated to 105 class. It fits most top-name brands — Whirlpool, Maytag, Kenmore, Amana, Crosley, Inglis, Roper and Admiral — and replaces WPW10276397VP, B40-3A, AP6018417, and LP397 among others.

Installation is reported as simple, and the fit is praised heavily. A Phillips-head screwdriver and channel locks will do the job, and owners mention getting the water flowing again without calling anyone. One point to plan for: the impeller on this pump is fixed and does not come out, so lint and hair collect in a sealed chamber over time. Cleaning your washer filter every month or two, especially after a load of towels or pet bedding, is the maintenance routine that keeps it running.

Honest caveats: the noise level splits buyers, and durability is not absolute — some pumps last years, a few give out within a year, which is the risk you take on an aftermarket part. Also fit the drain hose correctly at 60–90cm height before you blame the pump; too low a hose mimics a pump failure exactly.

Best for budget repairs: if a washer won’t drain and the priority is spending the least possible while still getting a working part, this pump fits the bill, and its fit list is extremely broad across Whirlpool-family brands.

One part to plan around: the sealed, non-removable impeller means debris builds up, so a filter-cleaning habit is not optional here.

Worth it when: you want the lowest outlay and the longest stated warranty — 10 years is a real commitment.

Pass if: you want a pump you can open and clean, since this one is sealed shut.

Fill-Fix Pick

3. Beaquicy W11096268 Water Inlet Valve

Two 1.06-Inch Ports120V 60Hz

When your washer fills at the wrong temperature or not at all, this is the part on the back panel.

The inlet valve controls water flow into the tub, and this one has two threaded ports measuring 1.06 inches across. Blue and red mesh inserts mark the cold and hot lines, so you cannot easily mix them up. Each port has its own solenoid — a small electric switch that opens and closes the water flow — so the washer can send hot, cold, or both based on the wash setting. If your machine hits error codes E1, F8, FL, LF or LO, fills with the wrong temperature, or won’t fill at all, this is the part to check first.

Fit coverage is wide, reaching Whirlpool, Kenmore and Maytag models and replacing W11220230, W10632527, W10758829, W10853296, AP6329544 and more. Installation is described as straightforward — unplug the washer, shut off the water, then swap the valve with screwdrivers, pliers and a wrench. The listing promises 5 years of after-sales support, which is a meaningful cushion on a part this inexpensive.

Where this valve gives buyers pause is long-term reliability. Reliability reports run mixed, with some mentioning failure well inside a year and cracking over a longer stretch. It is also the lowest-rated valve here at 4.0+. That said, plenty of these valves go in and work, and the wide compatibility makes it the practical choice when you need a fill fix and cannot find a genuine part fast.

Fill-fix coverage: broad model compatibility across Whirlpool, Kenmore and Maytag is what sells this valve, along with the 1.06-inch threaded ports that match standard hot and cold hoses.

Longevity caution: if a decade of service is what you expect, this is not that part — the durability record is genuinely mixed.

Reach for it when: your washer won’t fill or keeps landing on the wrong temperature, and you want the widest model coverage available.

Look elsewhere if: you want a factory-backed part with the strongest reliability reputation — look at the genuine Whirlpool valve below.

WTW-Series Match

4. Semzohc W11210459 Water Inlet Valve

Two Threaded PortsKenmore 110 Series Fit

Built for the WTW and 110-series crowd who need an exact fill-valve swap.

This valve targets a specific slice of the Whirlpool family: the WTW4616, WTW4816, WTW5000DW1 and WTW5000DW2 models, plus Maytag MVWC-series and Kenmore 110-series washers. It has two threaded ports and replaces W11210459, AP6329217, W10701459, W10838319, W10869799, W11025984 and W11038711. If your washer leaks, fills irregularly, runs at the wrong temperature, or refuses to stop filling, this is the part designed to address all four.

Where this one shines is the fit. Owners describe it dropping in as an exact replacement, and the reported install is very easy — the swap takes normal tools and no special skill. The valve body is plastic, which is lighter than the steel-bodied genuine options and note if you are comparing feel, but it does the job it is built for.

The honest limit is lifespan. A recurring durability note runs through the reviews, with some valves giving out around the five-month mark and others within a few weeks. That is a real risk, and it is worth knowing before buying. The flip side is that plenty of buyers get their fill problem solved and are glad they spent the money instead of hiring a technician. It sits at 4.3, with fit praised and lifespan the recurring complaint.

Why the fit wins people over

  • Exact-match replacement for WTW4616, WTW4816 and WTW5000DW1 models
  • Handles leaks, bad fill, wrong temperature and overfill in one part
  • Reported install is as simple as it gets for a valve swap
  • Replaces seven different part numbers, so fewer wrong orders

What you should know

  • Durability has genuine reports of early failure, with some giving out within months
  • The plastic body is lighter than genuine metal-bodied valves, if that matters to you

Right for you if: your model matches the WTW or 110-series list and you want a straightforward fill-valve swap.

Better elsewhere if: a long service life matters more than a cheap install — read the genuine options first.

Shake Stopper

5. AMI PARTS W10780048 Washer Suspension Rod Kit

23.6-Inch Rods4 Rods + Balls + Bushings

The part that stops a Whirlpool tub from banging across the laundry room floor.

If your washer vibrates, rattles, or walks during the spin cycle, the suspension rods are usually the reason. This kit ships with four rods, four suspension balls and four suspension ball housings, one set per corner of the tub. Each rod measures 23.6 inches long, and together they dampen the tub’s movement so it stays put through the fastest spin. The kit weighs 1.4 pounds total and fits a long list of part numbers, including W10257088, W10349193, W10748952, AP5971398 and more.

What people talk about most is how completely this kit fixes the shaking. Once the old, worn rods come out and the new ones go in, the washer runs smooth again and quiet returns to the spin cycle. The metal construction holds up, and a 1-year warranty backs it. Owners also note the kit costs a fraction of a new washer, which makes it the sensible fix when shaking is the only problem.

The length is where a buyer should be careful. There are notes that these rods run longer than some applications expect, so measure your old rods before ordering. If your existing rod is shorter than 23.6 inches, this is the wrong kit. It holds a 4.0+ rating, with functionality the most-praised point and fit complaints occasional.

The fix that earns the praise: customers note a washer that used to bang and walk around the room now runs balanced and quiet, and the metal rods and a 1-year warranty back up the claim.

The catch to check first: the 23.6-inch rod length is longer than some applications, so measure before you buy to avoid a fit problem.

Pick this if: your tub shakes and wanders during spin and the old rods are the culprit.

Skip if: your rods are shorter than 23.6 inches — this kit’s length will be the wrong fit.

Front-Load Workhorse

6. AMI PARTS 280187 8181684 Drain Pump Motor

A high-flow drain pump for front-loaders that need water gone fast.

Front-load washers drain differently than top-loaders, and this pump is built for that job. It runs on 110–127 volts at 60Hz, draws 85 watts at 1.4 amps, and pushes water at 45 liters per minute. It can lift water 1.5 meters, which matters when the drain standpipe sits high. It replaces 8181684, 285998, 8182819, 8182821 and 1200164 among others, and the listing notes compatibility with Kenmore, Whirlpool, Maytag and KitchenAid machines.

Reviewers point out the install is manageable, with the swap taking a few screws and normal tools. Reviews most often mention the pump working as expected, followed by easy installation and the savings versus a service call.

The honest caution here is durability, where feedback is genuinely split. The pump’s working life varies, and some shoppers say it giving out after a year or so. There is also a noise note, with a small share describing more noise than expected during the drain cycle. The fix symptoms are clear — no drainage, water leakage, no spin, or a pump that makes a racket — and this part is meant to cure all of them.

Flow you can count on: at 45 liters per minute and a 1.5-meter lifting height, this pump moves a full tub fast, and that is its defining spec.

Worth knowing: durability is mixed, so treat this as a solid economical fix rather than a lifetime part.

Best for: front-load Whirlpool and Kenmore owners who need a high-flow drain pump and a straightforward install.

Look elsewhere if: you need maximum longevity — this pump’s life is not guaranteed to be long.

Genuine OEM

7. Whirlpool WP3363394 Genuine OEM Drain Pump

Genuine Whirlpool10 L/Min Flow

The factory part, made by Whirlpool, for buyers who refuse to gamble on aftermarket.

Genuine OEM means Whirlpool designed and built this pump for its own appliances. It meets their engineering standards, and it ships with a 1-year warranty straight from the manufacturer. The part replaces 3363394, 8235, 64076, 63347, 62516, 3352492, 3348015 and 21024. It is a top-load drain pump with a 10-liter-per-minute flow rate, and it fits Whirlpool models including WET4024EW, LTE5243DQ, LTG5243DQ, CAM2742TQ and MAT14PDAWW. It weighs 9.92 ounces.

The trade-off against the cheaper pumps above is that you are paying for certainty rather than flow. The 10 liters per minute rate is modest compared to the 45 liters per minute of the front-load motor, so this pump is the right fit only when your top-loader calls for this specific part. Compatibility is narrower too, covering a shorter list of models. But for the buyer who wants their appliance running on the parts Whirlpool built for it, that is the point.

Factory certainty: Whirlpool’s own engineering and a 1-year warranty make this the safest build-quality choice in the group.

Narrower fit: the 10 liters per minute flow and short model list mean this is not a universal pump — check your model first.

Choose it if: you want the genuine part and your model appears on its compatibility list.

Not for you if: your washer needs a higher-flow pump or a model not listed here.

Duet Specialist

8. TOMOON WPW10730972 Drain Pump Assembly

120V / 80WPump + Motor Assembly

A full pump-and-motor assembly for the Duet and Maytag 2000 to 4000 series.

This is not just a pump — it is the whole pump and motor assembly, rated AC 120V, 60Hz, 80 watts. That matters for front-loaders because the pump and motor come out together, and buying the assembly saves you from splitting the pair. It fits Whirlpool, Kenmore, Amana, Inglis and Maytag machines, particularly the Duet line and Maytag 2000, 3000 and 4000 series. It replaces WPW10730972, W10130913, 8540024, W10117829, AP4308966, PS1960402 and a long list of related numbers.

Buyers report install times under 15 minutes, which makes this a genuinely quick fix. It is noted as quieter than the original in some cases, and an exact match for the factory part. The repair calls for a 1/4-inch nut driver, a 5/16-inch nut driver, a flathead screwdriver and pliers — regular tools, nothing exotic. One thing the listing flags: the plug connector may need modifying on some models, so check that before you start.

Durability and leakage are the two areas where the record wobbles, so keep an eye on the fittings after the install. And be sure you disconnect the power before you begin — the pump runs on mains current. For the Duet owner facing error codes F21, F33, SD or F02, this assembly is the targeted fix.

Fit for the Duet: the pump and motor ship as one unit, so you replace both at once and skip the guesswork of splitting the original pair.

Check before you start: the plug connector may need modifying on some models, and a minority see leakage or short life — inspect the fittings after install.

Go here if: you have a Whirlpool Duet or Maytag 2000/3000/4000 series washer that won’t drain and the codes point to the pump.

Reconsider if: your model needs a connector change you are not comfortable making.

Genuine Inlet Valve

9. Whirlpool W11513255 Genuine OEM Water Inlet Valve

Genuine Whirlpool0.75-Inch Compression Inlet

The factory inlet valve, built to Whirlpool’s own standards, with a one-year warranty.

This is the genuine Whirlpool part, which means factory engineering and a 1-year manufacturer warranty. It is a water inlet valve assembly with a 0.75-inch compression inlet, replacing W11385821. It fits Whirlpool and Admiral machines, and its metal body and stainless-steel exterior finish give it a more substantial feel than plastic-bodied aftermarket valves. The assembly weighs nothing worth worrying about during install.

The brand promise is the story here: This is Whirlpool’s own factory valve, built to the same spec as the part it replaces. If your washer won’t fill, fills at the wrong temperature, or throws the usual fill error codes, this is the correct factory replacement. The slightly higher price is the trade for that certainty and the warranty backing.

One compatibility note deserves prominence: this valve fits a shorter list of models than the aftermarket valves above, so confirm your model before you buy. It also uses compression fittings rather than the threaded ports on the aftermarket valves — a different connection style that matters if you are switching from one to the other. The feedback on record is small-sample but positive, with functionality and installation praised.

Genuine reassurance: Whirlpool’s own engineering and a full 1-year warranty, with a metal body and stainless finish that feels built to last.

Narrow fit: the shorter model list and compression connection style mean you must match your washer before ordering.

Worth the extra if: you want the genuine factory valve and your model is confirmed on its list.

Not the one if: you need a threaded-port fit or a model that is not covered here.

Know the Specs

Voltage and amperage on a pump

Most Whirlpool-family drain pumps run on 120 volts, the standard household circuit a washer uses. The amperage figure tells you how much current the motor pulls — 0.95 amps on one pump here, 1.4 on another. Both are normal for a drain motor. The voltage matters mostly as a confirmation: if a listing says 240 volts, it is not the right part for a standard North American washer circuit.

Flow rate in liters per minute

Flow rate is how fast the pump can move water out of the tub. A pump rated at 10 liters per minute drains slower than one rated at 45 liters per minute, which matters on larger or front-load tubs. Check your original part’s flow rate if it is printed on the body, or match the model number to the listing’s fit list to confirm the right spec.

Port size and connection type on an inlet valve

Inlet valves connect to the hot and cold water hoses behind the washer. The port size — 1.06 inches on one valve, 0.75 inches on another — must match your hoses, and the connection type (threaded or compression) matters too. A threaded port screws on, while compression uses a fitting that tightens down. Check which style your washer uses before ordering.

Part numbers and fit lists

A single replacement part often replaces several different part numbers, because the manufacturer uses different codes across model years. The listing’s replace list and fit list are your proof of compatibility. Find your washer model number on the lid, door, or frame, then match it against the fit list in the listing. That one step prevents the most common cause of returns.

Common Questions

How do I find my Whirlpool washer model number?
Open the washer lid and look on the frame, or check the door frame on a front-loader. The model and serial number usually sit on a sticker inside the lid opening or behind the lower front panel. Copy the model number exactly, including any letters after the numbers, and match it against the fit list in the part listing. Getting the number right is the single best way to avoid a return.
What part do I need if my washer won’t drain?
A washer that won’t drain, hums without spinning, or leaves standing water usually needs a drain pump. The OEM W10425238 pump, the TOMOON W10276397 pump, the Whirlpool WP3363394 genuine pump, and the TOMOON WPW10730972 assembly all handle this job for different model families. Check whether your washer is a top-loader or front-loader and match the model number before you choose.
Why does my washer fill at the wrong temperature?
The water inlet valve controls hot and cold flow, so a valve that is failing can send the wrong temperature, leak, or refuse to fill. The Beaquicy W11096268, Semzohc W11210459 and Whirlpool W11513255 valves all address this. If your machine shows E1, F8, FL, LF or LO codes, the inlet valve is usually the first part to check.
Is a genuine Whirlpool part better than an aftermarket one?
Genuine parts come from Whirlpool and carry their own warranty, often a year, and they meet the factory engineering standard. Aftermarket parts are made to match the original and frequently cost less, and some carry warranty terms that run longer. The durability record on both sides has honest variation, so check what the listing promises for warranty and fit before you buy.
How long should a replacement drain pump last?
There is no single answer — durability in the listings here is the most consistently mixed note. Some pumps run for years, and a minority fail within the first year. Keeping the pump’s filter chamber clean, especially after towels or pet bedding, and routing the drain hose at the right height helps extend the life. A warranty gives you a cushion when a part does not hold up.
Why does my washer shake during the spin cycle?
Violent shaking and a tub that walks across the floor usually point to worn suspension rods. The AMI PARTS W10780048 kit ships with four rods, four balls and four bushings — one set for each corner. Measure your old rods before ordering, because a length mismatch is the most common fit failure. Once the rods are replaced, balance and quiet return to the spin.
How high should the drain hose be installed?
The TOMOON W10276397 listing specifies 60–90cm for the drain hose height. A hose that lies flat on the floor or sits too low can cause slow drainage or noise during the spin drain, and that mimics a pump failure. Check the hose height and look for kinks before you decide the pump is at fault.
What tools do I need to replace a washer drain pump?
Most drain-pump swaps need only basic tools. The TOMOON WPW10730972 assembly calls for a 1/4-inch nut driver, a 5/16-inch nut driver, a flathead screwdriver and a pair of pliers. The TOMOON W10276397 pump asks for a Phillips-head screwdriver and channel locks. Always unplug the washer and shut off the water before you start.
Can a drain pump fit more than one washer brand?
Yes. Whirlpool builds machines that sell under several brand names — Whirlpool, Maytag, Kenmore, Amana, Crosley, Roper, Inglis and Admiral — and the same pump often serves them all. The OEM W10425238 pump fits a long list of Whirlpool, Maytag and Crosley models, and the TOMOON W10276397 pump covers Whirlpool, Maytag, Kenmore, Amana, Roper and more. Match the model number, not the logo.
What does the plug connector warning mean on a pump assembly?
The TOMOON WPW10730972 listing notes the plug connector may need to be modified on some models. That means the wiring plug on your washer may not slip straight into the new pump on every application. Check the compatibility list and the seller’s notes before ordering, and confirm whether your model falls into the group that needs the modification.

The Bottom Line

If you want the safest single choice, the OEM W10425238 pump is the one — it replaces five part numbers, covers an enormous model list, and holds the strongest rating in the group. If cost is the priority and you want a warranty that keeps going, the TOMOON W10276397 is the budget pick worth grabbing.

And when the tub is the problem, not the water, the AMI PARTS W10780048 suspension kit is the one to reach for — four rods, four balls and four bushings, sized to steady a washer that has been shaking itself loose. Check your model number against the fit list, and the right part is a ten-minute fix.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top