How to Connect a PS4 to a Curved Monitor? | HDMI Setup That Works

A PS4 connects to a curved monitor through the console’s HDMI OUT port and the monitor’s HDMI input — the screen’s curve has no effect on compatibility.

The PS4 only cares whether the display accepts its HDMI signal at a resolution it can send. Get that right and the bend is purely cosmetic — icons, menus, and games land exactly where they should.

What You Need

A PS4, a working HDMI cable, and a curved monitor with an HDMI input. Sony recommends the in-box cable; otherwise use a High-Speed or Premium High-Speed HDMI cable rated for the console. A monitor with only DisplayPort, DVI, or VGA can’t take a plain HDMI cable, and an analog VGA converter won’t reliably carry a protected PS4 signal — you’d need an active digital converter instead.

Two more checks: curved monitors often skip built-in speakers, so plan on plugging headphones into the DualShock 4 unless your model has audio out. And a 144 Hz monitor won’t make the PS4 run at 144 Hz — the console’s documented output tops out around 60 frames per second, depending on the game.

If you haven’t bought the screen yet, our roundup of the best curved monitors for PS4 covers which panels handle 1080p and HDR cleanly.

Step-by-Step Connection

Follow this order (Sony’s setup instructions use the same sequence):

  1. Turn off both the PS4 and the monitor.
  2. Plug one end of the HDMI cable into the PS4’s HDMI OUT port — not the port beside it.
  3. Plug the other end into the monitor’s HDMI input.
  4. Connect the PS4 power cable to AC IN and a wall outlet.
  5. Power on the monitor and switch it to the HDMI input you used.
  6. Power on the PS4.
  7. On the PS4, open Settings > Sound and Screen > Video Output Settings and set Resolution to Automatic, or pick a supported resolution yourself. The screen flickers once and settles — that’s confirmation it took.

For HDR: use the monitor’s HDR-capable HDMI input, turn HDR on in the monitor’s menu, then set the PS4’s HDR and Deep Colour Output to Automatic. Sony specifies a direct console-to-display connection for HDR — no receiver, switch box, or capture card in the middle.

For PS4 Pro 4K: enable 4K on the monitor, select its 4K HDMI input, and set the Pro to Automatic, 2160p-YUV420, or 2160p-RGB, depending on what the monitor supports.

Why the Screen Stays Blank

A black screen almost always traces to input selection, port choice, or a signal mismatch — not a broken console. Confirm the monitor is on the HDMI input you plugged into and the cable is in HDMI OUT rather than a neighboring port. Sony’s troubleshooting guidance recommends reseating both ends, trying another HDMI cable, trying a different HDMI input, and connecting the PS4 straight to the monitor instead of through a soundbar or switch.

Still nothing? If the console boots at a resolution the monitor can’t display, start the PS4 in Safe Mode and choose Change Resolution, which restarts it at 480p so you can see the screen and raise it from there. On a PS4 Pro connected to older HDCP 2.2 gear, Safe Mode option 8: Set HDCP Mode followed by HDCP 1.4 Only can restore the picture, though it caps output at 1080p and drops some 4K and HDR features.

You can also check PlayStation’s picture and sound troubleshooting guide for the same fix list if the display works with another device.

Console Max Output What The Monitor Needs
PS4 (original) 1080p HDMI input, 1080p support
PS4 Slim 1080p HDMI input, 1080p support
PS4 Pro 4K / HDR 4K 60 Hz HDMI input, HDR
1440p curved panel Scaled from 1080p Monitor must accept scaling
Ultrawide curved panel Scaled, letterboxed Monitor must accept scaling
DisplayPort-only monitor Active converter needed HDCP-compatible converter
No-speaker monitor Video only via HDMI Headphones or audio out

Common Questions

Does a curved screen distort the PS4 picture?

No. The curve changes viewing angles, not the signal. The console sends a standard HDMI image and the monitor displays it; the bend doesn’t stretch, crop, or warp the picture. What does affect the image is resolution scaling — a 1440p or ultrawide panel showing a 1080p signal will scale or letterbox it if the monitor supports that behavior.

Can I use a monitor with only a DisplayPort input?

Not with a plain HDMI cable. You need an active HDMI-to-DisplayPort converter that passes the PS4’s signal, ideally one that handles HDCP-protected content. Cheap passive adapters often fail on games and streaming apps because they can’t negotiate copy protection. VGA conversion is the worst option — it’s analog and poorly suited to a digital PS4 output.

Why do I get video but no sound?

Most curved monitors have no speakers. HDMI can carry audio, but only plays it if the monitor has built-in speakers or a headphone jack. Otherwise plug headphones into the DualShock 4 controller — that takes a second and works on every game. Some monitor models also need audio enabled in their on-screen menu before the jack outputs anything.

Sources

Scroll to Top