Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If your original Xbox One just went dark, the dead external brick on the floor is the likely culprit — not the console. You need the right replacement power supply. The one that fits your machine best depends on one thing above all: enough amperage (electrical current) to run your games without cutting out. The short answer is that a 220W brick pushing 17.9 amps at 12 volts is the target to aim for on the original Xbox One. The YAEYE low-noise brick sits at that mark, so your games keep running, and it stays one of the quieter designs in this group.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Seven bricks below all feed the original Xbox One. They are ranked by how well they hold up, how loud they run, and how well their protection circuits (safety parts that cut power on a fault) guard your console. Every pick here has to pass one test first: it must power the original Xbox One, the chunky model that uses an external brick. It must not be for the S or X versions, which have their supplies built in. The best Xbox One power supply matches your exact console model and its 220W, 12V, 17.9A rating.
Top Picks
How To Choose The Best Xbox One Power Supply
The original Xbox One — the big black box that launched with a Kinect — does not have a power supply built inside. Instead, it uses an external brick that sits on the floor between your console and the wall. When that brick dies, the console goes dead, even if the console itself is perfectly fine. That is why a replacement brick is among the most common purchases for owners of this model. It is also why buying the wrong one is so frustrating.
Match the brick to your exact console model
The single most important step is confirming which Xbox One you own. The original Xbox One uses an external brick with a figure-eight or two-pin power cord. The Xbox One S and Xbox One X have the supply built inside the console and only need a standard power cable. If you own an S or X, none of these bricks will help you. Check the label on the back of your console or on your old brick before you order anything.
Look for 220W and 17.9 amps, not just “Xbox One compatible”
The output spec is the one that determines whether the console runs smoothly or stutters and cuts out mid-game. A brick rated at DC 220W, 12V, 17.9A gives the console what it needs to run games and apps at full load. A lower-output brick may work, but it has less headroom and can trip its own protection circuits when the console draws heavy current. The 20A bricks in this group push even more current, though real-world performance still depends on how stable the internal chip is.
Weigh noise and heat against how quiet your room is
Replacement bricks almost all use a small internal cooling fan. That fan is the main source of the complaints you see in reviews — some run nearly silent, and some hum or whine at a level you notice during quiet scenes. A brick with better heat dissipation runs cooler, which tends to mean the fan kicks on less and the unit lasts longer. If your console sits in a bedroom or a quiet living room, noise should carry real weight in your decision.
Do not overlook the safety circuits
A good brick includes overheat protection, overcurrent protection, and short-circuit protection. These are the circuits that cut power when something goes wrong, rather than letting the fault travel into your console. Look for these in the description before you buy. A cheap brick that skips them is not a bargain if it takes your console down with it.
Side-by-Side Comparison
| Model | Best For | Output | Current | Weight | Amazon |
|---|---|---|---|---|---|
| YAEYE Power Supply Brick★ Best Overall | Most owners, quietest all-rounder | DC 220W | 17.9 A | 0.68 kg | Amazon |
| Prodico LED Display BrickBudget Champion | Troubleshooting with clear lights | DC output, 100-240V input | 10.83 A | 500 g | Amazon |
| KSW KINGDO Quiet Version | Heavy cooling on a budget | DC 203W | 16.5 A | 0.71 kg | Amazon |
| TREE.NB Upgraded Brick | Raw current on a tight budget | DC 200W | 20 A | — | Amazon |
| DINTYOU 220W Brick | Light weight for travel | DC 220W | 17.9 A | 0.62 kg | Amazon |
| SUMLINK Power Supply Kit | Long-term use, brand warranty | DC 220W | 3.76 A | 1.3 lb | Amazon |
| Ponkor Power Supply | Fireproof housing, wide reviews | DC 220W | 17.9 A | — | Amazon |
Detailed Reviews
1. YAEYE Power Supply Brick for Xbox One with Power Cord
Our pick — 4.5+★ from 13,500+ verified ratings; the strongest balance of quality and price.
The 17.9-amp brick that most original Xbox One owners end up happy with.
If you want the safest bet in this category, the YAEYE is it. The YAEYE delivers DC 220W at 12V and 17.9A, which is the current the original Xbox One wants for full-load gaming. The 100-240V auto voltage means you can plug it in anywhere in the world without a step-up converter. It is not an OEM part, but it is built as a direct replacement, and for most owners that is enough.
What wins people over is the sheer number of owners who have replaced a dead brick with this one — it has the highest quality sentiment in the group. The cooling fan and inner structure were revised specifically to improve heat dissipation and cut noise, and the majority of owners describe it as quiet. A few do report a fan that hums more than expected, and a small number have had units fail within a few weeks or months. That pattern is worth knowing, but it is a minority experience against a very large review base.
The dual LED lights give you a quick read on status: orange means standby, green means on. That tells you at a glance whether the brick or the console is at fault. If you want a proven, quiet all-rounder that matches the console’s rated 220W output, reach for the YAEYE.
Where It Wins
- DC 220W at 12V and 17.9A matches what the original console draws at full load
- Revised fan and inner structure cut noise versus older brick designs
- 100-240V auto voltage works in any country without an adapter
- Orange and green LEDs make it obvious whether the brick or console is the problem
Worth Knowing
- Not an official Microsoft part, so it is a replacement rather than OEM
- Some units run louder than the “low noise” label suggests
- A small share of buyers report early failure, which any budget brick carries risk of
Go for this if: your original Xbox One needs a quiet, full-output brick and you want the option with the strongest owner track record.
Think twice if: you need silence in a shared bedroom and cannot tolerate any fan hum at all.
2. Xbox One Power Supply LED Display Power Brick Replacement
A light-up brick that tells you exactly when it is live and when it is not.
This Prodico brick is the entry-level pick, and its clearest advantage is the status display. A red light when the power source is connected and a green light when the adapter is working gives you a diagnostic tool you would otherwise have to guess at. The body is plastic, it takes a two-pin main connector, and it runs on 50-60 Hz with input up to 240V. It is built only for the original Xbox One, not the S or X.
The catch is the current rating. This brick delivers 10.83 amps, which is lower than the 17.9A of the YAEYE above. For light use — dashboard, streaming, casual games — it should be fine. For long, demanding sessions, the lower headroom means less margin. It does include overheat protection that shuts the unit off if it gets too hot, which is a sensible safeguard on a lower-output brick.
If it stops working, the manufacturer’s own troubleshooting step is to unplug it for a few seconds and plug it back in. That is a simple reset, and it does solve some cases. Reliability across buyers is genuinely mixed, though — some units work perfectly and some stop. Treat this as a value pick for a spare or a quick fix rather than a long-term anchor.
What you are buying: a simple, light brick with an honest status readout and a lower 10.83A output, best suited to casual play or as a backup.
Fits best: a second console, a spare setup, or a budget-minded buyer who wants the lights to tell the story.
Pass on it: if your sessions are long and heavy and you want the full 17.9A of headroom.
3. KSW KINGDO Power Supply Brick [Sole New Quietest Version]
Noise was the target here — the fan and inner layout got a redesign to get there.
KSW KINGDO built this brick around a cooling-fan and inner-structure redesign aimed squarely at the noise problem. Output is DC 203W at 12V and 16.5A, with a 100-240V input range at 2.4A. That is a little below the 220W of the YAEYE and SUMLINK picks, so it is not the maximum-output brick in this group. For everyday gaming, 203W is still a healthy figure.
What separates it is the support package. It comes with a 365-day replacement warranty and a 30-day refund guarantee, plus 24/7 email support. That is the most explicit coverage of any brick here. The heat-dissipation holes and built-in cooling fan are there to keep the unit cool during longer sessions, and the LED indicator shows green when working and orange on standby.
The honest trade-off is the same one every brick in this category faces: owner experience with noise is split. The redesign helps, but not every unit lands silent. If warranty confidence matters more to you than a few watts of headroom (extra power in reserve), this is the sensible pick.
The Support Advantage
- 365-day replacement warranty plus a 30-day refund guarantee
- Dedicated heat-dissipation holes and a cooling fan for longer sessions
- Green working light and orange standby light make status obvious
- 100-240V range covers worldwide outlets
The Trade-Off
- 203W and 16.5A sit below the 220W and 17.9A of the top picks
- Noise reports are split even with the quietest-version redesign
Reach for this if: you want a real warranty and have had bad luck with bricks dying without recourse.
Look elsewhere if: you want the absolute highest output rating for the original console.
4. TREE.NB Upgraded Power Supply Brick for Xbox One
It pushes 20 amps — more current than the 17.9A bricks — but there is a real noise trade.
On paper, the TREE.NB is the most current-hungry brick in this group. It is rated at 20A versus the 17.9A of the YAEYE, SUMLINK, and Ponkor picks, which is a meaningful gap if you want maximum headroom for demanding games. It is a 200W replacement brick with dual status LEDs, orange on standby and green when working, and a 100-240V auto-voltage input for worldwide use. The internal hardware includes overheat, overcurrent, and short-circuit protection.
The problem is the fan. Noise is the most-complained-about aspect of this brick by a clear margin — the fan blows loudly enough that owners describe it as a constant background hum. Durability is the second weak spot, with reports of units stopping after a week or failing inside a month. That said, the people whose units work do report the functionality is solid, and it is priced as a budget-friendly option.
If your console lives in a room where fan noise does not bother you and you want the most amperage available, this is worth a look. Just go in with a clear-eyed view that the fan noise is the defining trade-off.
Balanced read: the 20A output is the highest here, but the loud fan and durability reports make this a pick for a tolerant setup, not a quiet bedroom.
Buy it when: you need the most amps and the console sits somewhere fan noise does not carry.
Skip it when: your Xbox One is in a shared or quiet space, where that fan will get noticed fast.
5. DINTYOU 220W Power Supply Brick for Xbox One
At 0.62 kg, this is the lightest 220W brick in the group — easy to pack in a bag.
DINTYOU’s brick hits the same 220W output and 12V 17.9A current as the YAEYE and SUMLINK picks, but it weighs 0.62 kg. For comparison, the KSW KINGDO weighs 0.71 kg. That weight gap matters if you carry your console between houses or set it up in different rooms — the brick is the heaviest single piece to pack. The 100-240V input at 4.91A and 47-63Hz covers worldwide outlet voltage.
This one is specific about which consoles it fits. It is designed for the original Xbox One model 1540 or 1541, and DINTYOU says plainly it is not compatible with the Xbox One S, Xbox One X, Xbox Series S, or Xbox Series X. That clarity is genuinely helpful, since the S and X models do not use an external brick at all and use a standard IEC cable instead. Check your console model before you order.
The cooling design uses airflow vents, fan control, and noise-reduction, plus over-voltage, over-current, short-circuit, and overheating protection. It is a straightforward, no-frills brick that matches the console’s needs. This one has fewer reviews, so the longer-term picture is less proven than the YAEYE — a point worth being honest about.
The right fit: a buyer who needs the full 220W current and packs the console up regularly, wanting the lightest brick available.
The caveat: the smaller review pool means less evidence for long-term reliability.
6. SUMLINK Power Supply Brick for Xbox One
The belt-and-suspenders brick: full 220W output, a 12-month warranty, and a proven fan design.
The SUMLINK is the safest bet if you want a brick that has been road-tested by a very large number of owners. It delivers DC 220W at 12V and 17.9A, matching the YAEYE and Ponkor picks on output. Its standout feature is the built-in smart chip with a Synchronous Rectifier controller — that is the component that handles under-voltage and internal over-temperature protection. In plain terms, it is the circuit that catches a fault before it reaches your console.
The radiator fan system is described as the latest updated design for little fan noise, and for most buyers that holds up. A minority do report a high-pitched noise issue. That is the one honest blemish on an otherwise strong record. It also includes 12 months of warranty and a 30-day money-back guarantee, which is generous for this category.
The weight is 1.3 pounds, so it is heavier than the DINTYOU’s 0.62 kg if you plan to carry it around. The dual LEDs show green for on, orange for standby, and off or blinking when the connection has an error — a useful diagnostic if a game will not boot. If you want the most-proven brick with real warranty backup, the SUMLINK is the one.
Why It Earns Its Spot
- Full DC 220W at 12V and 17.9A output for no compromises during heavy gaming
- Smart chip with Synchronous Rectifier control adds under-voltage and over-temperature protection
- 12-month warranty plus 30-day money-back guarantee
- LED states include an off-or-blinking error signal for connection problems
The Honest Caveat
- A minority of owners mention a high-pitched fan noise
- At 1.3 pounds it is heavier to carry than the DINTYOU pick
Best for: a long-term replacement where warranty cover and the biggest owner base matter more than saving every gram.
Not for: a buyer who needs the lightest possible brick to carry around.
7. Ponkor Power Supply for Xbox One
Fireproof ABS housing and 220W of output make this a sturdy, safe-feeling brick.
Ponkor leans into safety as its main selling point. The housing is made of ABS fireproof material, and the internal smart chip protects against overheating, overcurrent, overvoltage, and short-circuiting. That is a complete set of protective circuits, and the fireproof shell is a detail the other bricks here do not call out. Output is DC 220W at 12V and 17.9A, with a 100-240V input at 4.91A and 50-60Hz — so it travels worldwide without fuss.
The fan and internal design got an engineering pass aimed at quieter, more durable operation. It is described as no-noise, though as with any brick in this group, real-world noise varies unit to unit. Power output is 220W, which matches the top picks. The package includes the brick, the AC power cord, and after-sales service.
One practical warning from Ponkor itself: when you are not using the console, unplug the brick. That is sound advice for any external supply, since it avoids leaving the unit on standby indefinitely. If you want the most safety-forward build with the full 220W output, this is a strong choice.
The standout detail: a fireproof ABS shell plus a full protection suite is reassurance you will not find stated on every brick here.
Worth choosing if: confidence around heat and electrical safety is your top priority.
Look elsewhere if: you need the lightest brick or the widest review base, since this one is less established than the YAEYE or SUMLINK.
Know the Specs
Wattage and Amperage
Wattage is the total power the brick can deliver, and amperage is the current flowing at 12 volts. The original Xbox One draws on a DC 220W, 12V, 17.9A supply. A brick rated below that number has less headroom and may drop power when the console is working hard. Think of it like a water pipe: a wider pipe delivers more flow without straining. If the rating is tight, the console can cut out mid-game. Look for 220W and 17.9A or higher if you want the most margin.
Auto Voltage and Worldwide Use
A 100-240V auto voltage input means the brick adjusts itself to the wall outlet, wherever you are. In countries that run on 100-120V and those on 220-240V, the same brick works without a converter. That matters if you move, travel, or buy a console abroad. Check the label for the full input range, including the amperage figure, before you rely on it overseas.
Protection Circuits
Overheat, overcurrent, overvoltage, and short-circuit protection are the safety nets inside a good brick. Each one cuts power when something goes wrong. Overheat protection detects a unit that is running too hot and shuts it down. Short-circuit protection catches a wiring fault before it can travel into the console. These circuits are why a brick with a full set is worth more than one that skips them.
Console Compatibility
The original Xbox One, model 1540 or 1541, uses an external power brick. The Xbox One S and Xbox One X use a built-in power supply and a standard power cable, so an external brick will not plug into them at all. The Xbox Series S and Series X also use a built-in supply. Always confirm your model before ordering, because this is the single most common mistake buyers make in this category.
Common Questions
Will this power supply fit my Xbox One S or Xbox One X?
Does the wattage rating actually matter for gaming?
Why does my power brick have an orange light instead of green?
How long should a replacement brick last?
Can I use the brick in another country?
Are these bricks official Microsoft parts?
How do I reset the brick if the console will not power on?
Should I leave the brick plugged in when the console is off?
What is the difference between a 200W and a 220W brick?
How loud will the fan on these bricks be?
The Bottom Line
For most people shopping for the best xbox one power supply, the YAEYE Power Supply Brick is the pick that fits best. It delivers the full DC 220W at 12V and 17.9A the console wants, so your games get the power they need. It runs quiet for the majority of owners, and it has the strongest quality record in the group. If you want a real warranty behind your brick, the SUMLINK gives you 12 months and a proven fan design. And if the lightest possible brick for carrying between rooms is what you need, the DINTYOU packs the same 220W output at 0.62 kg.
Before you order, one last check: confirm your console is the original Xbox One, model 1540 or 1541, and not the S or X. That single step prevents the most common mistake in this category. Pick the brick that matches your console model and your noise tolerance, and you will be back in the game.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.