Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your Xbox One will not switch on, and the little brick on the floor is the reason. The short answer to which replacement is worth buying: the YAEYE 220W brick is the strongest overall pick. It feeds the console the full 220W at 12V and 17.9A, which is the exact output the original Xbox One expects. Check your console model first: the original Xbox One takes an external brick, while the One S and One X do not.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A failed brick leaves the console dead, and the wrong one will not bring it back. This breakdown covers output ratings, fan noise, and which bricks fit which console so you can pick a reliable Xbox One Console Power Supply without guessing.
Top Picks
![Power Supply Brick Compatible with Microsoft Xbox One [Sole New Quietest Version]](https://m.media-amazon.com/images/I/71T9kEsKZhL.jpg)
How To Choose The Best Xbox One Console Power Supply
A power brick is a voltage converter, not a generic accessory, and its output has to match your console’s spec exactly. Match the output and the console boots as it did on the factory brick. Miss it and the console stays dark.
Match the output first, not the label
The original Xbox One wants DC 12V at 17.9A, which is 220W of power. A brick rated for 203W at 12V and 16.5A delivers less, so it works harder to keep up. Look at the output line stamped on the brick and compare it to your old one before anything else.
Confirm your console model
The external brick fits only the original Xbox One. The Xbox One S and Xbox One X draw power straight from a standard IEC cable with no brick at all. If you own a One S or One X, none of these bricks apply to you.
Weigh the noise trade-off
Every brick here has a cooling fan inside, and the fan is what owners notice. A firmware-improved cooling design keeps things quieter, but a brick sitting open on a shelf will still hum. Give it airflow and keep it off carpet.
Check the input range if you travel
Auto voltage 100-240V means the brick accepts the wall current in most countries. That saves you carrying a step-up converter when you move the console between regions.
Side-by-Side Comparison
| Model | Best For | Output | Input Range | Weight | Amazon |
|---|---|---|---|---|---|
| YAEYE Power Supply Brick★ Best Overall | All-round replacement | 220W / 12V 17.9A | 100-240V | 0.68 kg | Amazon |
| KSW KINGDO Quietest VersionQuietest Pick | Quiet-first buyers | 203W / 12V 16.5A | 100-240V | 0.71 kg | Amazon |
| TREE.NB Upgraded Brick | Budget-minded replacement | 200W replacement class | 100-240V | — | Amazon |
| DINTYOU 220W Brick | Model 1540/1541 owners | 220W / 12V 17.9A | 100-240V | 0.62 kg | Amazon |
| SUMLINK Power Supply Brick | Long-term daily gaming | 220W / 12V 17.9A | 100-240V | 1.3 lb | Amazon |
| YCCSKY Advanced Quiet Version | Quiet fan focus | 220W / 12V 17.9A | 100-240V | — | Amazon |
| Microsoft OEM Power Supply Kit | Official-part purists | 220W / 12V 17.9A | 100-120V | — | Amazon |
Detailed Reviews
1. YAEYE Power Supply Brick for Xbox One
Our pick — 4.5+★ from 13,500+ verified ratings; the strongest balance of quality and price.
The brick that matches the console’s original appetite spec for spec
If your original Xbox One suddenly goes dark, this brick restores the exact 220W output it was built for. The brick pushes DC 220W at 12V and 17.9A — the same output stamped on the factory unit — plus 5Vsb at 1.0A for standby. That 5Vsb rail keeps instant-on working, so the console wakes from standby as it always did.
What wins people over is the build and the fit: it is the top positive theme in the feedback from thousands of owners, and the second-biggest is that it works as a straight replacement. The fan gets mixed reports — some find it genuinely quiet as advertised, and others hear a constant industrial-fan drone. Heat dissipation got real attention in the design, so keeping the vents clear makes a difference.
Plug it in anywhere and it copes: the input accepts AC 100-240V at 4.91A and 47-63Hz, so a European or Asian wall socket works with a plug adapter alone. Two LED lights tell you the state at a glance — orange on standby, green when the adapter is on. The honest catch is that the auto voltage and the price tag do not buy you a lifetime guarantee; some units are reported to stop working after a few weeks. It is a like-for-like replacement, not a permanent upgrade over the original part.
What earns its place
- Matches the original output exactly: 220W, 12V, 17.9A
- Runs on AC 100-240V across regions with only a plug adapter
- Color-coded LED for standby and on states
- Over-heated, over-current, and short-circuit protection built in
Where it asks for care
- Fan noise is hit or miss across units
- Not compatible with Xbox One S or Xbox One X
- A few units reportedly fail early, so keep the packaging
Buy it if: you want the closest match to the original brick’s power spec and a brand with a big track record.
Look elsewhere if: a dead-silent fan is your top priority, or your console is a One S or One X that never needed a brick.
2. Power Supply Brick Xbox One Sole
For the player who hears the brick over the game audio
This brick is marketed around silencing its fan, and the cooling design is where the builder put the work: a revised inner structure and a high-quality cooling fan, plus heat-dissipation holes cut into the shell. The output lands at DC 203W at 12V and 16.5A, with 5Vsb at 1A for standby. That is below the 220W the YAEYE pushes, so if your setup pushes the console hard, the YAEYE is the safer match.
Owners generally see the quality as strong and the value as sensible — many say it beats repairing or replacing the whole console outright. The noise picture is genuinely split, though. Some owners call it very quiet, and others find it pretty noisy in a quiet room. A green light means working and an orange light means standby, so you can tell what state the brick is in without leaning in to listen.
The warranty is the standout detail here: 30 days for a refund and 365 days for a replacement, with email support seven days a week. That is the sort of cushion a commodity brick rarely offers. The honest caveat is that the “quietest” claim is a design intent, not a guarantee — and the smaller wattage output is the real spec trade-off you accept to get it.
Why the quieter fan matters: the cooling fan gets redesigned internals and airflow holes, so the brick is built to run without broadcasting its presence.
The wattage you trade: 203W and 16.5A sits below the 220W benchmark, so heavy gaming sessions leave less headroom.
Reach for this if: a noisy brick is the reason you are replacing in the first place, and you want a long warranty behind the swap.
Think twice if: you want the full 220W output or your console sits in a cabinet where any fan noise is noticeable.
3. Upgraded Power Supply Brick Xbox One
A spare brick that travels, wired for wall sockets worldwide
The headline here is the amperage: this brick is rated at 20 A, which is above the 17.9A output on the YAEYE. It comes as a complete set — the adapter and the charger cord are both in the box — so you do not have to hunt down a separate cable the day the old one dies.
The input handles AC 100-240V auto voltage, so a trip with the console in tow does not need a converter, only the right plug shape. Two LED indicators mirror the other bricks: orange is standby, green is working. Safety is covered by CE and FCC certification, and 24/7 email support rounds out the after-sale side.
The honest picture is more mixed on sound and long-term life. The fan is the loudest recurring theme in owner feedback, and a fair number of units reportedly quit within a week or did not make it a month. That still leaves plenty of buyers who found it a working, affordable fix. Treat it as a sensible short-term replacement, not a brick you plan to rely on for years.
Fits the job
- Rated at 20 A, a higher amperage than several rivals
- Adapter and cord both included
- Auto voltage 100-240V for travel
- CE and FCC certified for safety
Costs you confidence
- Fan noise is the most-reported drawback
- Durability reports are hit and miss
- Not compatible with the One S or One X
A good fit for: a quick, low-cost revival of a console you simply want switched back on.
Better skip if: you need a brick that will stay quiet and last through daily sessions for a long stretch.
4. DINTYOU 220W Power Supply Brick for Xbox One
Specified to the console model, so there is no guesswork
This is the brick that tells you exactly which console it is for. It is designed for Xbox One model 1540 and 1541, and it puts out DC 12V at 17.9A — the full 220W — so the console gets the power it was built for. You verify your model first, and then the fit is guaranteed.
Cooling is handled by airflow vents and a fan with a noise-reduction design, which matters for long gaming sessions. Four protection layers sit inside: over-voltage, over-current, short-circuit, and overheating. Input is AC 100-240V at 4.91A and 47-63Hz, so it travels too. The box includes the brick and a power cord, nothing extra to buy.
Here is the catch worth taking seriously: this is original-Xbox-One-only hardware. It will not touch the One S, One X, Series S, or Series X — all of those run from a standard IEC cable with no external brick. If you own one of those consoles, this brick is the wrong purchase, full stop. Check the label on your old supply before you order.
The model-first move: naming models 1540 and 1541 removes the fit risk that trips up other brick listings.
The catch: cross out the One S, One X, Series S, and Series X — this brick only fits the original console.
Matches up with: the buyer who knows their console model and wants the full 220W at 12V and 17.9A without paying a premium.
Wrong choice for: anyone on a One S, One X, Series S, or Series X, since those consoles never used a brick.
5. SUMLINK Power Supply Brick for Xbox One
A steady daily driver that keeps the console switching on
The SUMLINK runs a smart chip that handles over-heating, over-current, over-voltage, and short-circuit protection, plus under-voltage and internal over-temperature protection. That is a lot of safety logic packed into a replacement brick. Output is DC 220W at 12V and 17.9A, with a 5Vsb at 1.0A standby rail, matching the console’s original appetite.
Functionality is the theme that carries this one — owners consistently report it just works, and quality is the clear second. A new-generation synchronous rectifier controller inside keeps the supply efficient without a pile of extra parts. The dual LED tells you what is going on: green for power on, orange for standby, off or blinking if the connection is faulty. That blinking state is a useful early warning your cable is loose.
The SUMLINK has become one of the more established names in the category. The honest catch is noise: buyers report the fan runs quieter than many rivals, yet some owners hear a high-pitched whine. A 12-month warranty and a 30-day money-back window soften the risk. If you want maximum current on paper, the TREE.NB wins; if you want a known name with a return window, this one fits.
What stands out
- Full 220W at 12V and 17.9A output
- Smart chip with five layers of protection
- Dual LED signals connection faults with off or blinking states
- 12-month warranty plus 30-day money-back window
The real limits
- Some owners hear a high-pitched fan noise
- Input is listed for the global voltage range, so double-check your plug
- No Xbox One S or One X fit
Pick this one when: you want a brick with visible fault signals and a year of cover behind it, at a sensible price.
Keep looking if: you are especially sensitive to a high-pitched fan tone in a quiet room.
6. YCCSKY Xbox One Power Supply Brick [Advanced Quiet Version]
Big ownership base, with the fan as both its star and its weak point
The output here is the full spec: DC 220W at 12V and 17.9A, with 5Vsb at 1A for standby — matching the YAEYE and SUMLINK exactly. The cooling fan was the focus of the build, mentioned in its own right as an upgraded part. If your old brick ran hot, the revised fan design is the reason to consider this one.
Quality is by far what brings people in, with replacement as the clear second theme — owners see it as a straightforward swap for the original part. The noise story is split down the middle: some hear a genuinely quiet brick, and others find it louder than the part it replaced. The build itself is compact and covered by a plug form factor that sits neatly on a shelf.
One practical tip from the manufacturer matters for the green light: make sure the brick follows the required voltage, and if the power supply is still on while the console is off, that is the reason. The durability note is honest — some owners mention a lifespan of only a few months, so this is a replacement part you buy knowing it may need swapping again sooner than you would like.
What the fan work buys: a cooling design built to run cooler and quieter than the brick it replaces, on the same 220W output.
The part to weigh: durability is the honest open question, with some owners getting only a few months out of it before it stops.
Fits well if: you want full 220W output and a reworked cooling fan from a brand with a huge ownership base.
Weigh the risk if: you expect the brick to outlast the console without another swap down the line.
7. Microsoft OEM Power Supply Kit for Xbox One
The factory part, for the buyer who will not settle for a lookalike
This is the Microsoft-branded OEM brick, built as an official replacement for the Xbox One power supply. It puts out DC 220W at 12V and 17.9A with a 5Vsb at 1A standby rail, so the power figures are identical to the third-party bricks here. The difference is the badge on the box and the complete set.
The kit ships with the Microsoft OEM adapter and a US-version power cable that runs long — an advantage if your console sits far from the wall socket. Input is AC 100-120V at 4.91A and 47-63Hz, so it is US-voltage only. If you plan to use the console abroad, this brick needs a voltage converter in many regions because it is set to the US range.
Owners who have the official kit praise its build quality; the split is over value. Some call it the right spend for a genuine part, and others say it costs more than the job calls for. This is the peace-of-mind pick, not the value pick. It is overkill for a console that only needs a working brick, so a budget buyer should look at the YAEYE instead.
The official-kit advantage: a long cord and the Microsoft OEM badge, with the same 220W at 12V and 17.9A output as the rest.
Region catch: the input is 100-120V, so it is built for US wall sockets, not international travel.
Go official if: you want the factory part and a cord that reaches, and you are switching on a US-voltage socket.
Otherwise look to: the third-party bricks that handle 100-240V and cost a good deal less.
Know the Specs
Output: 12V and 17.9A (220W)
Output is the power the brick feeds the console. The original Xbox One wants DC 12V at 17.9A, which adds up to 220W. A brick rated at 203W at 12V and 16.5A delivers less, so it works harder under load. Match the output line on the brick to the one on your old supply, and the console behaves as it should.
Input: Auto Voltage 100-240V
Input is the wall current the brick accepts. A rating of AC 100-240V at 4.91A and 47-63Hz means the brick handles most countries’ sockets. You still need a physical plug adapter to fit the wall, but no step-up or step-down converter. A brick rated only 100-120V is set for the US range and may need a converter abroad.
Standby: 5Vsb at 1.0A
The 5Vsb line is the low-power standby current that lets the console wake from sleep. Every brick here supplies 5Vsb at 1.0A, so the instant-on behavior and boot-up flow stay as you remember them.
Cooling and Fan Noise
Each brick here runs a cooling fan, and the fan is what owners notice most. A design with improved heat dissipation and airflow holes runs quieter. Place the brick on a hard surface with clear vents and it sheds heat better and runs calmer.
Common Questions
Will this brick fit my Xbox One S or Xbox One X?
What does the green and orange LED on the brick mean?
Is 203W enough for the original Xbox One, or do I need 220W?
Can I use one of these bricks on a 240V socket in another country?
Why does my power brick fan run so loud?
Do these bricks cause overheating or damage to the console?
How long should a replacement brick last before I replace it again?
Is a third-party brick as good as the Microsoft OEM part?
Do I need to buy a separate power cord with the brick?
Will my console’s instant-on mode work with these bricks?
The Bottom Line
For most people hunting for the right xbox one console power supply, the YAEYE is the pick: it gives you the full 220W at 12V and 17.9A (watts and amps, the power and current your console draws), dual LED status lights, and protection against overheating, over-current, and shorts. It is the closest thing to putting the original brick back in. If a loud fan is your reason for replacing, the KSW KINGDO quietest version trades some wattage — 203W at 16.5A — for a redesigned fan and a year of replacement cover. And if you want the factory part with a long cord for a US socket, the Microsoft OEM kit is the safe, official choice. One nudge worth repeating: confirm your console is the original Xbox One before you spend a penny, because the One S, One X, Series S, and Series X never used a brick.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.