9 Best Whirlpool Dishwasher Pump Replacement | Pump It Right

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your Whirlpool dishwasher stopped draining, stopped spraying, or started pooling water in the bottom, you probably do not need a new dishwasher — you need the right pump. The trick is that Whirlpool uses two completely different pumps that fail in completely different ways, and buying the wrong one wastes a weekend. This guide sorts the drain pumps from the circulation pumps and matches each pick to the symptom you are actually seeing.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Start by reading your model plate, then match it against the compatibility lists below before you order anything. The right fitment turns a flooded kitchen into a simple fix, and that is the whole game with a whirlpool dishwasher pump replacement.

Top Picks

OEM Dishwasher Pump W10876537 W10348269 by LinkEZ
Best OverallOEM Dishwasher Pump W10876537 W10348269 by LinkEZ4.5+★700+ ratingsOne white-front drain pump that quietly ends the discontinued-black-pump confusion for good. Here is the thing nobody tells you before you start: Whirlpool phased out the black-front version of this drain pump.Check price on Amazon
AMI PARTS W10348269 Dishwasher Drain Pump
Best ValueAMI PARTS W10348269 Dishwasher Drain Pump4.0+★200+ ratingsThe economical drain fix with a surprising number of crossed part numbers printed right on the listing.Check price on Amazon
Uotnam W11612326 W10805386 Circulation Pump
Top PerformerUotnam W11612326 W10805386 Circulation Pump4.5+★150+ ratingsFor dishes that come out gritty while the tub drains perfectly — this is the spray-arm pump. Different pump, different job.Check price on Amazon

How To Choose The Best Whirlpool Dishwasher Pump Replacement

Two pumps do two different jobs inside your dishwasher, and mixing them up is the single most common expensive mistake. A drain pump pushes the dirty water out at the end of the cycle. A circulation pump pushes that water up to the spray arms during the wash. If water sits in the tub, you want a drain pump. If the dishes come out gritty but the tub empties fine, you want a circulation pump.

Read the Symptom Before You Read the Listing

Standing water in the bottom of the tub points to the drain pump — it is not moving water out. Dishes that stay dirty while the tub drains normally points to the circulation pump — the water never reaches the spray arms. A loud grinding or humming with no water movement can be either one, so pull the model number before you commit to a part.

Find Your Model Plate, Then Search the List

The model plate sits on the inner edge of the door or on the frame behind the door, and it is the only thing that matters for fitment. Every pick here publishes a long compatibility list. Open the listing, use CTRL+F, and search your full model number. If your number is not there, do not buy that pump — a part that looks identical can have a different impeller housing.

Understand Superseded Part Numbers

Whirlpool retires part numbers and replaces them with new ones, so your old pump’s number may not appear on any current listing. A white-front pump can replace a discontinued black-front version of the same unit, which is why the crossing numbers matter as much as the headline one. Write down every number stamped on your old pump before you shop.

Side-by-Side Comparison

Model Best For Pump Type Key Electrical Spec Crosses To Amazon
LinkEZ W10876537★ Best Overall Draining and standing water Drain pump 3.3 L/min flow W10348269, W10724439 Amazon
AMI PARTS W10348269Best Value Budget-conscious drain fix Drain pump 120VAC, 60Hz, 50W, 0.7A 8558995, 661662, 8565839 Amazon
Uotnam W11612326Top Performer Bad circulation, weak spray Circulation pump — W10805386, W10879262, W11521435 Amazon
Whirlpool WPW10531320 Genuine OEM drain swap Drain pump — W10314713, W10531320 Amazon
Luckman W11084656 Wide multi-brand coverage Circulation pump 120V, 0.8A, 60Hz W10854710, W10805387 Amazon
YEECHUN W11084656 Cross-referenced circulation fix Circulation pump — W11612327, W10805387, W10854710 Amazon
KitchenAid WPW10605057 KitchenAid and Jenn-Air machines Pump and motor assembly — 3021439, W10236194, W10534160N Amazon
Whirlpool WPW10757217 Quiet-running circulation rebuild Circulation pump 120V, 60Hz, 2.1A 8193509, 8531020, 8535759 Amazon

Detailed Reviews

★ Best Overall

1. OEM Dishwasher Pump W10876537 W10348269 by LinkEZ

Our pick — 4.5+★ from 700+ verified ratings; the strongest balance of quality and price.

3.3 L/min Flow RateFits About 340 Models

One white-front drain pump that quietly ends the discontinued-black-pump confusion for good.

Here is the thing nobody tells you before you start: Whirlpool phased out the black-front version of this drain pump. This LinkEZ unit is the white-front W10876537, and it works in machines that originally used either the white W10876537 or the discontinued black W10348269. So if you are staring at a black-faced pump in your hand and worrying you cannot find it, this is the part that takes its place.

What you get in the box is the pump itself, rated to move 3.3 liters per minute of wastewater out of the tub. That number sounds dry, but it is the reason a full wash cycle can actually empty instead of leaving a puddle over your heating element. The listing also publishes a compatibility list covering about 340 Whirlpool and affiliated models, including Kenmore, Amana, Jenn-Air, KitchenAid, and Maytag.

Check your model number against the fitment list before you order — the maker’s own instruction is blunt: if your exact model number is not on that list, do not buy it. That is not a sales trick. It is the one honest guardrail that stops a wrong-part return. Buyers report it works like the factory part it claims to be, and 700+ owners have kept it at 4.5+ stars. That 4.5+ star average across 700+ reviews is the highest rating and deepest review base among the drain pumps here.

Where this pump earns its keep

  • Functions as an exact-fit OEM-style pump, which is the trait buyers value most here
  • 3.3 liters per minute of drainage clears a full tub instead of leaving standing water
  • Published compatibility for about 340 Whirlpool, Kenmore, KitchenAid, Maytag, Amana, and Jenn-Air models
  • White front replaces both the older black W10348269 and the current W10876537

What to weigh before you order

  • Sealing quality splits opinion in the reviews — a nuisance wobble at the housing can leave you chasing a drip
  • Noise divides owners; some find it near-silent, others hear a hum they did not have before
  • You must scroll the full model list yourself to confirm your machine

Reach for this if: your tub holds standing water and you want the part that has the broadest documented fitment across the Whirlpool family.

Think twice if: you cannot locate your exact model number on the list — the maker flatly says skip it in that case.

Best Value

2. AMI PARTS W10348269 Dishwasher Drain Pump

120VAC 50W MotorFits Kenmore and Whirlpool

The economical drain fix with a surprising number of crossed part numbers printed right on the listing.

If your symptom is noisy operation, no draining, or a tub that leaks, this AMI PARTS pump is built around exactly those three complaints. The motor is specced at 120VAC, 60Hz, 50W, and 0.7A — plain English: it is the standard household electrical draw for this kind of drain pump, so it plugs into the same harness your old one used. The body is listed at 11.84 ounces, made from ABS plastic and metal.

The real draw here is the cross-reference spread. It replaces 8558995, 661662, 8565839, W10158351, W10084573, W10348269, AP5691922, AP6020066, PS8688439, and PS11753379, which means a machine running a superseded number still has a path to a working pump. Installation gets described as straightforward, and the maker points you to video walkthroughs rather than a printed sheet.

Here is the honest catch on the cheaper side of the market: a small number of owners mention a unit that failed after roughly a couple of months. Weigh that against the majority who had it running like new with no leaks. This is the pump to pick when you have confirmed fitment and want the job done economically — just test the seal on first run.

The fitment math: ten crossed part numbers is a wide net, wider than the LinkEZ drain pump above, so oddball Kenmore and Whirlpool machines have a better chance of matching here.

The trade you make: durability is the recurring weak note rather than the norm — most units run clean, but a short-lived one is not unheard of.

Pick this one when: fitment confirmed and budget is the driver, with a quick leak check after the first cycle.

Walk on by if: your old pump number is nowhere in that crossing list.

Top Performer

3. Uotnam W11612326 W10805386 Circulation Pump

1-Year WarrantyCirculation and Motor Assembly

For dishes that come out gritty while the tub drains perfectly — this is the spray-arm pump.

Different pump, different job. This one is the circulation pump and motor assembly, the part that pushes water up to the spray arms so the wash cycle actually cleans. If your dishwasher fills and drains fine but the dishes are still dirty, that is the tell. The assembly is compatible with Whirlpool, Kenmore, Ikea, and Amana machines and replaces W10805386, W10879262, W11521435, 4978305, AP7193729, PS16744934, and EAP16744934.

It arrives as a single plastic-bodied unit at 0.82 kg, corded electric, with the model number W11612326 stamped on the part. Reliability is what carries this pick: owners praise it for that more than any other trait, which matters more than any single spec for a part buried under the tub. Installation is the other bright spot — the consensus is that it takes about five minutes with no special tools.

One-year warranty coverage backs it, with refund or replacement offered if something goes wrong. The one honest caveat is durability feedback that splits — some owners describe it as good as new, a few report a shorter life. That is typical of aftermarket circulation pumps, and the warranty is the cushion that makes the split acceptable.

Why it climbs to the top of the circulation class

  • Reliability is the trait praised most, ahead of every other aspect
  • About a five-minute swap with no special tools per owner reports
  • Crosses to W10805386, W10879262, W11521435, and AP7193729
  • One-year warranty with refund or replacement offered

The fine print

  • Durability feedback is mixed — most are thrilled, a few are not
  • Model list is long and must be CTRL+F searched rather than eyeballed

The right call for: weak spray, dirty dishes, or a circulation pump you suspect is worn — with the reassurance of warranty coverage.

Not your part if: the tub is holding standing water; that is a drain pump job, not this one.

Genuine OEM

4. Whirlpool WPW10531320 Genuine OEM Drain Pump

Factory PartOne-Year Warranty

The factory-branded drain pump for owners who want the box to say Whirlpool on it.

Some people will not put an aftermarket part in a machine that cost them real money, and this is the pick for that instinct. It is a genuine Whirlpool OEM pump, built to Whirlpool engineering standards, in stainless steel, and it replaces both W10314713 and W10531320. The compatible appliance list names KDTE334GPS, KDTE254ESS, KDPE334GPS, KDTE204DSS, and KDTE334DSS.

Installation is the thing that wins people over here — the pump goes in without tools according to the owner reports, and dishwashers that had quit are running again afterward. Fit is reliable across the listed models, and Kenmore Elite owners specifically have found it a match. A one-year limited warranty from Whirlpool covers the part.

The honest note is on drainage: most report a perfectly dry result, while a handful hit a leak after a couple of washes. That is a seal-seating issue you can head off by checking the housing on install. For anyone repairing a Whirlpool-family machine that still holds value, paying for the factory part is a reasonable hedge against a second teardown.

What the OEM badge buys: stainless steel construction and Whirlpool’s own one-year limited warranty, both of which the aftermarket picks simply do not offer.

What to watch: a small number of units leaked after two washes — check the seal seats fully before you call it done.

Best for: owners who want a factory Whirlpool part and a warranty behind it, especially on a machine worth keeping.

Skip the premium if: your model is not on that short compatible list — fitment is narrower than the aftermarket options.

Most Versatile

5. Luckman Upgraded W11084656 Circulation Pump

120V 0.8A MotorSeven-Symptom Fix

A circulation pump that names seven failure symptoms and matches most of them straight to the listing.

This Luckman circulation pump is the wide-net option for spray and circulation problems. It lists seven symptoms it addresses, from leaking water and abnormal noise to a dishwasher that fills and drains repeatedly without ever entering the cleaning cycle. The motor is rated 120V, 0.8A, 60Hz — standard household current, so no rewiring — and it replaces W10854710, W10805387, W11612327, 4534097, AP6050340, PS12070585, and EAP12070585.

Compatibility is the headline. It covers Kenmore, KitchenAid, Whirlpool, Amana, and IKEA, with long published model lists for each brand. The body is a mix of plastic, rubber, and metal, measures 7.25 by 4.5 by 5.4 inches, and ships as a single replacement unit. The maker also walks you through a six-step install in the listing, from pulling the harness to tightening the hose clamp.

The catch is installation and quality feedback, both of which split. Some find the swap simple, others hit friction getting the new pump seated firmly in the port. Quality draws a similar split, with most owners happy and a few less so. If you have confirmed your model and want a circulation pump that covers a lot of ground, this is a fair middle-ground pick.

Reasons it stays on the shortlist

  • Spans Kenmore, KitchenAid, Whirlpool, Amana, and IKEA compatibility in one unit
  • Fixes seven listed symptoms, including water that will not circulate
  • Six-step install walkthrough printed right in the listing

Room for pause

  • Installation difficulty splits — seating the pump firmly takes patience
  • Quality feedback is mixed, so confirm the warranty terms before ordering

Your move if: you have a multi-brand machine and want a circulation pump with the broadest symptom coverage.

Hold off if: you are not comfortable feeding the pump into its port firmly — that is where installs go sideways.

Premium Pick

6. YEECHUN W11084656 W11612327 Circulation Pump

12-Month Warranty6.1 by 5.1 Inch Body

A circulation pump with a 12-month warranty and a long cross-reference list for the same part number.

Same part number family as the Luckman above, but the YEECHUN listing leans harder into fitment detail — and that is where it earns its premium spot. It replaces W11612327, W10805387, W10854710, 4534097, AP6050340, PS12070585, and EAP12070585, and it publishes separate model lists for Whirlpool, Kenmore, and KitchenAid owners to search through.

It fits a tight space under the tub at 6.1 by 5.1 inches and weighs 0.77 kg, so it drops in where the old pump came out. The build is plastic, metal, and rubber. It is listed as a genuine OEM (original equipment manufacturer — the same part the factory uses) W10854710 cross-reference. It addresses seven symptoms, from no spray to a worn or cracked circulation pump. A 12-month low-maintenance warranty backs the purchase — longer than the other aftermarket circulation pumps here.

Installation is straightforward enough — remove the kick plate, pull the mounting screws, disconnect the harness, swap the pump, reconnect. Follow the wiring carefully, because that is the one step that trips people. Fit and function both land well across the reviews; the honest limit is that this is still an aftermarket part with no factory warranty behind it. If you want the longest warranty on a circulation pump here, this is the one to order.

Coverage that stands out: 12 months is the longest warranty offered on any circulation pump in this guide.

What you accept: genuine cross-reference does not equal factory backing — read the warranty steps so you know how to claim.

Made for: a Whirlpool, Kenmore, or KitchenAid owner who wants long warranty coverage on a circulation pump.

Look elsewhere if: your model is not on the three brand lists in the description.

KitchenAid Fit

7. KitchenAid WPW10605057 by Whirlpool OEM Pump and Motor

FSP Certified PartKitchenAid, Jenn-Air, Whirlpool

The full pump and motor assembly for KitchenAid and Jenn-Air owners who want the factory part.

When the whole pump-and-motor unit is gone, not just the impeller, you need the assembly rather than a bare pump. This is a genuine Whirlpool FSP part, factory certified, engineered to exact specifications, and it fits some models from KitchenAid, Whirlpool, and Jenn-Air. It pushes and circulates water to the spray arms, and it replaces 3021439, W10236194, W10534160N, and W10605057.

Fit is the strength — owners describe it as an exact match to the original OEM assembly, with installs finished in around an hour by careful DIY hands. Cleaning performance comes back to like-new after the swap. The part ships with 30-day returns and 90-day defective returns rather than a full year, so read that fine print before you buy.

The caution worth hearing: durability comes up as a weak note here, and this is the priciest class of pump in the guide besides the top OEM unit. When you are spending premium-part money on a full assembly, confirm the part number against your service manual or a technician first. That step saves you from a costly miss.

Why it holds its spot: factory-certified OEM build and an exact-match fit for KitchenAid and Jenn-Air machines, backed by 30-day returns and 90-day defective returns.

The real limit: durability feedback has weak spots, and the return window is shorter than the one-year coverage on other OEM picks here.

Right for: a KitchenAid or Jenn-Air owner replacing the full motor-and-pump assembly with a factory part.

Check first if: you only need the impeller — a bare pump is cheaper than this whole assembly.

Quiet Operator

8. Whirlpool WPW10757217 Genuine OEM Circulation Pump Assembly

120V 2.1AGenuine OEM

The factory circulation pump that owners say makes the dishwasher run quieter than it did new.

If your dishwasher got loud before it stopped spraying, this OEM circulation pump assembly is the part that addresses the noise directly. It delivers water to the spray arms and is rated at 120V, 60Hz, 2.1A — a higher current draw than the aftermarket circulation pumps in this group, which tells you it is a different class of motor. It replaces a long list of crossed numbers including 8193509, 8193531, 8268378, 8531020, 8531021, 8534941, and 8535759.

Noise and function are the two things owners praise most. Dishwashers that were loud before come back running smooth and quiet afterward. Installation is fast — one report puts it at under two minutes to swap. Fit is also reliable across the listed models. At 7 pounds, this is a substantial part, so plan for the weight when you are lying on your back under the machine.

The honest limit is durability feedback, which splits. That is a small note against an otherwise strong showing. For a factory circulation pump with a 7-pound, 2.1A motor behind it, this is the top of the OEM class — and the quieter wash afterward is why it is worth the price.

The standout: a 120V, 60Hz, 2.1A motor with enough mass (7 pounds) to run smooth and quiet, which owners notice immediately.

Hear the fine print: durability feedback splits, so lean on the factory backing and inspect the housing on install.

Choose this if: you want a genuine Whirlpool circulation pump and quieter operation after the repair.

Only if: your model matches one of the crossed part numbers — the list is long but specific.

Know the Specs

Flow Rate (Liters Per Minute)

Flow rate tells you how fast the pump pushes water out of the tub. A drain pump rated at 3.3 liters per minute moves a full wash load out without leaving a puddle behind. Higher flow is not always better — it must match what the pump housing and hose can handle.

Voltage, Amperage, and Frequency

Voltage (120V) and frequency (60Hz) are the electrical supply the motor expects from your home. Amperage (0.8A, 2.1A) tells you how much current it draws. All of these must match your dishwasher’s wiring — a pump rated for a different voltage simply will not run correctly.

Cross-Reference Part Numbers

Manufacturers retire and replace part numbers, so a replacement may carry several crossed numbers. When your old pump says W10348269 but the listing says W10876537, check the crossing list — it may be the direct replacement for a discontinued version.

OEM vs Aftermarket

OEM stands for Original Equipment Manufacturer — the part is made by the same company that built the dishwasher. Aftermarket parts are made by third parties to fit the same slot. OEM usually carries a factory warranty; aftermarket often costs less and may carry its own coverage.

Common Questions

How do I know if I need a drain pump or a circulation pump?
Check where the water is. If the tub holds standing water at the end of the cycle, the drain pump is not clearing it. If the tub drains fine but dishes come out gritty, the circulation pump is not reaching the spray arms. Each pump handles a different job, and the symptom points to which one.
Will the LinkEZ W10876537 fit my dishwasher if it originally had the black W10348269?
Yes, per the manufacturer. The black-front W10348269 was phased out, and the white-front W10876537 replaces both versions. Confirm your exact model number against the published list before ordering, because fitment is the only thing that matters with a replacement pump.
Where do I find my dishwasher’s model number?
The plate is usually on the inner edge of the door or on the frame behind the door. Copy the full model number and use CTRL+F to search it against the listing’s compatibility list. Do not order until you have matched the exact number.
How long does a circulation pump replacement take to install?
Customers note around five minutes for some circulation pumps and roughly an hour for full pump-and-motor assemblies. The time depends on whether you are swapping a bare pump or the motor unit, and on how accessible the housing is on your model.
What do the crossed part numbers on a listing mean?
They are the other part numbers the manufacturer says the pump replaces. Whirlpool retires numbers over time, so a single pump may cross-reference several. If your old pump’s number is on the list, the part is designed to fit your machine even if the headline number looks different.
Is a genuine OEM pump worth the higher cost over an aftermarket one?
OEM parts are made by the original manufacturer and usually carry a factory warranty. Aftermarket parts often cost less and may carry their own coverage. If the dishwasher is worth keeping and you want factory support, the OEM route makes sense; if it is older and you want the job done economically, an aftermarket pump is a fair choice.
My new pump leaks after installation. What should I check?
Check the seal-seating at the pump housing first. Some leak reports trace back to the housing not seating fully, or to the retaining ring not being tight enough. Confirm the rubber hose is snug on the clamp and that the pump is pressed firmly into its port before you run another cycle.
Can a replacement pump fix a dishwasher that fills and drains without cleaning?
Yes, if the symptom is the circulation pump failing. Some listings specifically flag a machine that fills and drains repeatedly without entering the wash cycle as a circulation pump symptom. If that is your case, a circulation pump replacement is the right part, not a drain pump.
What electrical specs do I need to match on a replacement pump?
Match the voltage and frequency to your household supply, typically 120V, 60Hz in the US. Amperage can vary between models, so the key is that the pump is rated for your machine’s wiring. If the listing shows a different voltage from your original pump, do not use it.
Do I need to drain the dishwasher before replacing the pump?
Yes. Pull the power and shut off the water, then bail or towel out any standing water before you remove the pump. A dry tub makes the swap cleaner and helps you spot where the old seal failed, which can point to the leak you were chasing.

The Bottom Line

For most people, the whirlpool dishwasher pump replacement winner is the LinkEZ W10876537. It carries the highest rating and deepest review base of the drain pumps here, plus the broadest documented fitment across the Whirlpool family. It also handles the black-to-white pump phase-out that trips up so many owners. If your symptom is dirty dishes rather than standing water, grab the Uotnam W11612326, which owners rate highest for reliability among the circulation pumps here. And for a KitchenAid or Jenn-Air machine that needs the full pump-and-motor swapped with factory backing, reach for the KitchenAid WPW10605057.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top