8 Best Wheel Spacers for Trucks | Stop Guessing Bolt Patterns

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

The hardest part of buying wheel spacers for your truck is not picking a thickness. It is getting a set that actually centers on your hub, so your steering wheel stops shaking at highway speed. Most of the frustration people run into comes from a spacer that is lug-centric instead of hub-centric, or one whose bolt pattern and hub bore do not match their axle. This guide sorts through the current options by bolt pattern, hub bore, thickness, and stud grade, so you can match a set to your truck in minutes instead of guessing.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see which sets are built for GM half-tons, which ones fit heavy-duty eight-lug axles, and which sets are machined for Ford’s six-lug pattern. Every pick below lists its real bolt pattern and hub bore, so you can cross-check your own truck before you order. Here is a clear, fitment-first look at the best wheel spacers for trucks.

Top Picks

Rough Country 2' Wheel Spacer (fits) 88-20 Chevy Silverado GMC Sierra 1500
Best OverallRough Country 2″ Wheel Spacer Silverado Sierra 15004.5+★750+ ratingsA GM-specific spacer built to sit flat on your hub and stay there for the long haul. If your truck is a 1988–2020 Chevy Silverado or GMC Sierra 1500, a 1992–2020 Tahoe, Yukon, or Suburban, this set was machined for exactly that axle.Check price on Amazon
ECCPP 2PCS 6 Lug Hub Centric Wheel Spacers 1.5 inch 6x5.5 to 6x5.5
Best ValueECCPP 2PCS 6 Lug Hub Centric Wheel Spacers 1.5 inch4.5+★300+ ratingsA lighter, milder-lift spacer for the GM owner who wants a wider stance without going full two inches. Here is the honest head-to-head.Check price on Amazon
OMT 6x5.5 Wheel Spacers with 108mm Center Hub Bore, Set of 4
Most VersatileOMT 6×5.5 Wheel Spacers with 108mm Center Hub Bore, Set of 44.5+★5,500+ ratingsOne box, four corners — the set that lets you widen the whole truck in a single order. A set of four changes the math.Check price on Amazon

How To Choose The Best Wheel Spacers for Trucks

Start with your truck’s bolt pattern, not with how wide you want the stance to look. A spacer only fits if its bolt pattern matches the studs on your axle and the holes on your wheel, and a mismatch means it will not bolt on at all. GM half-tons and SUVs run a 6×5.5 pattern, heavy-duty Ram and GM trucks run an eight-lug 8×6.5, and older Ford F-150s run 6×135. Get that number right first and everything else falls into place.

Match the hub bore, not just the lug holes

The hub bore is the round opening in the center of the spacer that sits over your axle hub. A hub-centric spacer centers itself on that raised hub, so the wheel spins true instead of relying on the lug nuts to hold it in line. The picks here run bores from 78.1mm to 126.15mm, and a single mismatch here is often what causes a shimmy at speed.

Decide between 1.5-inch and 2-inch thickness

Thicker spacers push your wheels farther out, which gives you clearance for bigger tires and a wider track. A 1.5-inch set is the milder option and keeps your wheels closer to stock, while a 2-inch set moves them out a full 2 inches for a more aggressive stance. Pick the thickness that clears your tires and brake calipers without pushing the wheel past your fender.

Check the stud grade and material

Studs carry the load from your wheel into the hub, so their grade matters. Higher-grade studs, like a 10.9 or 12.9 grade, are built to hold torque under stress, and forged 6061-T6 aluminum resists cracking better than cast metal. A set machined from a solid forged block is the more durable choice for daily driving and trail use.

Side-by-Side Comparison

Model Best For Bolt Pattern Thickness Hub Bore Amazon
Rough Country 2″ Wheel Spacer★ Best Overall GM 1500 trucks 6×5.5 (6×139.7) 2″ 3.08″ Amazon
ECCPP 2PCS 6 Lug Hub CentricBest Value Mild 1.5″ lift 6×5.5 (6×139.7) 1.5″ (38mm) 78.1mm Amazon
OMT 6×5.5 Set of 4Most Versatile Four-wheel value 6×5.5 (6×139.7) 2″ 108mm Amazon
KSP 2inch 8×6.5 Forged HD eight-lug trucks 8×6.5 (8×165.1) 2″ (50.8mm) 126.15mm Amazon
dynofit 2in 6×5.5 Set of 4 Newer GM and Ram 1500 6×5.5 (6×139.7) 2″ (50.8mm) 108mm Amazon
EVIL ENERGY 6×5.5 1.5″ GM 1500 trucks 6×5.5 (6×139.7) 1.5″ (38mm) 78.1mm Amazon
Richeer 2 Inch Hubcentric Heavy-thickness GM fit 6×5.5 (6×139.7) 2″ 78.1 mm Amazon
dynofit 2inch 6×135 Ford F-150 6×135 2″ (50mm) 87.1mm Amazon

Detailed Reviews

★ Best Overall

1. Rough Country 2″ Wheel Spacer Silverado Sierra 1500

Our pick — 4.5+★ from 750+ verified ratings; the strongest balance of quality and price.

6061-T6 AluminumPreinstalled Studs

A GM-specific spacer built to sit flat on your hub and stay there for the long haul.

If your truck is a 1988–2020 Chevy Silverado or GMC Sierra 1500, a 1992–2020 Tahoe, Yukon, or Suburban, this set was machined for exactly that axle. That means a 6×5.5 (6×139.7mm) bolt pattern, a 3.08-inch center bore that matches the GM hub, and an M14x1.5 thread pitch for proper wheel seating. No adapter rings, no guesswork on the center bore.

The spacer is a full 2 inches thick, which pushes your wheels out for a wider track and gives you clearance for larger tires both on the street and off-road. It is precision-machined from 6061-T6 aluminum, a high-strength alloy that holds up under daily driving and trail use, and it arrives with the wheel studs already pressed in. Not having to press studs yourself is a real time-saver when you are working in a driveway.

Owner feedback keeps returning to the machining, the hub fit, and the strength of the 6061-T6 aluminum. What wins people over is how these match up with the front wheel stance and give the truck a more aggressive look without introducing odd vibrations. The trade-off to know about is simple: this is a two-piece set, so if you want all four corners widened, you will need a second pair. It is also a GM 1500-specific fit, so a heavy-duty eight-lug axle needs a different set entirely.

What earns its keep

  • 3.08″ center bore matches the GM 1500 hub for a true seat
  • 2″ thickness clears larger tires and widens the track
  • 6061-T6 aluminum with preinstalled studs for easy install
  • Backed by a Limited Lifetime replacement warranty

What to plan around

  • Sold as a pair, so four corners means buying twice
  • Fits the GM 1500 six-lug pattern only, not HD eight-lug trucks

The right call: A GM 1500 owner who wants a proven, hub-matched 2-inch set with the studs already in place.

Reconsider if: You drive a heavy-duty eight-lug axle or need spacers for all four corners in one order.

Best Value

2. ECCPP 2PCS 6 Lug Hub Centric Wheel Spacers 1.5 inch

Hubcentric1.5″ Thickness

A lighter, milder-lift spacer for the GM owner who wants a wider stance without going full two inches.

Here is the honest head-to-head. Set these 1.5-inch spacers next to the Rough Country set and the size difference is real — roughly a 33% gap in thickness, 1.5″ (38mm) versus 2″ (50.8mm), and they come in around 38% lighter at 9.5 pounds. That lighter, thinner build is exactly what some buyers want, because it keeps the wheels closer to stock and takes less off the top of your lug thread engagement.

These fit the same GM family — 1999–2020 Silverado 1500, 1995–2019 Tahoe, 2000–2014 Suburban 1500, and the GMC equivalents — with a 78.1mm (3.07″) hub bore and M14x1.5 thread pitch. Buyers report the 78.1mm bore seats as expected with no vibration once the M14x1.5 studs are torqued correctly. The maker’s own tip is worth repeating: clean the rust off the wheel and hub surfaces and follow the recommended torque, and vibration is a non-issue.

What you gain with the thinner spacer is a subtler stance change and a little less unsprung weight at each corner. What you give up is the extra clearance a 2-inch set gives you for bigger tires. These fit a broader year range than you might expect for the price, but they are still a two-piece set.

Where the money lands: This is the entry point for a proper hub-centric GM spacer. You get the correct 78.1mm bore and the right M14x1.5 pitch without paying for a thicker set you may not need.

The one thing to own: At 1.5 inches, you are making a modest change, so if you are chasing maximum tire clearance this is not the set for that job.

Built for: The GM 1500 owner chasing a cleaner wider stance and a bit less weight at each wheel.

Not the pick when: You need to clear oversized tires or want the full 2-inch push.

Most Versatile

3. OMT 6×5.5 Wheel Spacers with 108mm Center Hub Bore, Set of 4

Set of 4T6 Aluminum

One box, four corners — the set that lets you widen the whole truck in a single order.

A set of four changes the math. Instead of buying a pair and a second pair later, this box covers all four wheels at once, which is why it has become the default for a lot of Silverado, Sierra, Tahoe, and Yukon owners. The 108mm center hub bore is a match for the 6×5.5 pattern, and the 2-inch thickness pushes the axle track out on every corner.

The aluminum is machined from solid T6 blocks, and the 24 Dacromet-coated M14x1.5 bolts are a standout detail — Dacromet is a corrosion-resistant coating, and these are rated well above standard bolts for rust resistance. The rear face has slots cut into it, which makes removal far easier after a few winters of road salt. Removing a seized spacer can turn into a nightmare, so having a pry point built in is a thoughtful touch.

Owner feedback credits the fit across a wide year range — K1500 from 1994–1998 up through Silverado 1500 to 2022, Tahoe to 2022, and the GMC family. Owners also report running this 6×5.5 set on non-truck vehicles with the same pattern. The catch is stud durability: some owners mention the studs wearing out sooner than expected, so check torque and inspect them periodically.

Why the four-pack wins: All four corners, one order, a 108mm bore that seats on the hub, and coated bolts that fight corrosion.

Where to stay watchful: Long-term stud durability is the recurring concern, so re-torque and inspect rather than install and forget.

Suits: The owner who wants to widen the whole truck in one purchase and values corrosion resistance.

Less ideal if: You would rather buy a heavier-duty set and inspect less often.

Top Performer

4. KSP 2inch 8×6.5 Wheel Spacers Ram 2500 3500

8 LugForged 6061-T6

The heavy-duty answer for eight-lug axles, with forged aluminum and hardened studs.

Most spacers on this list are built for half-ton trucks with a six-lug pattern. This one is not. It runs an 8×6.5 (8×165.1mm) bolt pattern for 2013-and-newer Ram 2500 and 3500, plus a long list of GM heavy-duty applications, and that alone puts it in a different class of load. The hub bore is a big 126.15mm to match those HD axles, and the thickness is 2 inches (50.8mm).

The build is the story here. It is cast from 6061-T6 aluminum billet, and the 10.9-grade geomet bolts are heat-treated and hardened to deliver strength and cut down on vibration. The black anodized finish adds corrosion resistance on top. KSP also lists a recommended torque of 85–95 ft/lbs and includes a thread locker for the fasteners, which is a detail budget kits skip.

HD-truck customers note 10,000 miles of use with no issues, and the 126.15mm bore seats cleanly on the hub. The recurring note is vibration — some buyers feel it and some don’t — so proper torque and checking your wheel balance go a long way here. The other thing to know is that this is a two-piece set, so you are buying a pair at a time for a truck that often wants four.

What makes it HD-ready

  • 8×6.5 (8×165.1mm) pattern built for Ram 2500/3500 and GM HD axles
  • 126.15mm hub bore matches the heavy-duty hub
  • 10.9-grade hardened studs with thread locker included
  • 85–95 ft/lbs recommended torque is clearly spec’d

The part that needs care

  • Vibration is a touchy subject — balance and torque matter
  • Two-piece set means four corners needs two orders

Go here if: You drive a Ram 2500/3500 or a GM HD truck and need a true eight-lug spacer.

Look elsewhere if: A half-ton six-lug truck is what sits in your driveway.

Fits Newer Trucks

5. dynofit 2in 6×5.5 Wheel Spacers Silverado Sierra 1500

Set of 4108mm Bore

A four-piece forged set for the newest GM half-tons and the 2019-and-up Ram 1500.

Year range is what sets this one apart. It covers Silverado 1500, Sierra 1500, Tahoe, Yukon, and Escalade all the way through 2026, and it also reaches the 2019–2026 Ram 1500, the 2023–2026 Colorado III and Canyon III, and the Avalanche and Express 1500. If you own a recent half-ton that a lot of older kits won’t name, this is one of the few sets that does.

You get four spacers, a 6×5.5 (6×139.7mm) pattern, a 108mm hub bore, 2-inch (50.8mm) thickness, and M14x1.5 thread pitch. The aluminum is 6061-T6 forged and anodized black, and the bolts are SGS-tested for hardness and rust resistance. Forged rather than cast means the metal is denser and holds shape better under stress.

The caution is stud durability: owners like the 108mm-bore fit and the roughly one-inch-wider tire stance, but some reviewers point out studs breaking off. The maker’s own guidance tells you a lot — use a little glue on the spacers, get an alignment after install, and re-torque the open-end lug nuts after 50–100 miles. That re-torque step is the one people skip, and it matters most on a set with this much load on the studs.

Why it makes the list: The widest year range of any six-lug set here, four pieces in the box, and a proper 108mm hub seat.

The trade-off: Stud durability is the weak spot in owner feedback, so treat the 50–100-mile re-torque as mandatory, not optional.

Pick this for: A 2019-or-newer GM half-ton, Ram 1500, or newer Colorado/Canyon that needs a current-year fit.

Think twice if: You want to install and forget — this set rewards the owner who checks torque.

Premium Pick

6. EVIL ENERGY 6×5.5 Wheel Spacers 1.5″

Forged Billet10.9-Grade Bolts

A machined, anodized 1.5-inch set for GM owners who want forged strength in a milder lift.

This is the premium route to a milder stance. The 1.5-inch (38mm) thickness and 78.1mm hub bore pair up exactly like the ECCPP set, but the build here is forged 6061-T6 aluminum billet with 10.9-grade geomet bolts, and the surface is anodized for accuracy and stability. Forged billet resists cracking under stress, which is the difference between a set you trust at highway speed and one you don’t.

Fitment is thorough for GM half-tons and SUVs — Silverado 1500, Tahoe, Suburban, Express, Sierra 1500, Yukon, and Yukon XL — with a 6×5.5 (6×139.7mm) pattern and M14x1.5 pitch. The recommended torque is 85–95 ft/lbs, and the maker lists it clearly, which tells you the bolts were specced for that load. Four spacers come in the box, so you cover all four wheels in one order.

The manufacturer is unusually direct about installation, and their advice is worth following: hand-tighten rather than hitting it with power tools, because over-tightening can crack a bolt. They also recommend having your wheels professionally balanced after install, since spacers can affect balance. That is not a flaw so much as the nature of the part — any spacer changes wheel balance slightly, and balancing afterward keeps the ride smooth.

The premium argument: Forged billet, anodized finish, 10.9-grade bolts, and four pieces — the materials are a step up from a standard cast kit.

What it asks of you: Hand tools and a balance check afterward, plus it is a 1.5-inch set, so it will not clear oversized tires the way a 2-inch set would.

Best matched to: A GM half-ton owner who wants forged materials and a subtle 1.5-inch push on all four corners.

Skip the upgrade if: You need maximum tire clearance and would rather go two inches.

High Tensile

7. Richeer 2 Inch 6×5.5 Hubcentric Wheel Spacers

Grade 12.9 Studs2″ Thickness

The set that leans on stud strength — Grade 12.9 hardware rated to 1000MPa of tensile strength.

Stud strength is the headline. The Grade 12.9 studs are rated to 1000MPa of tensile strength, above the 10.9-grade studs most kits use. In plain terms, tensile strength is how much pull the stud takes before it stretches or fails, so a higher number gives you more of a safety margin when the wheel is loaded hard. For an owner who carries weight or tows, that margin is the reason to pick this set.

You get four 2-inch spacers with a 6×5.5 (6×139.7mm) pattern, a 78.1mm hub bore, and 14×1.5 threaded studs and nuts. The wheels are built from forged 6061-T6 billet aluminum, CNC-machined, and finished with an anodized coating that protects against environmental erosion. Fitment covers Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon, and Escalade across a long year range.

The piece to weigh honestly is fit. This is a 78.1mm bore set and it fits most trucks well, but owners with 22-inch wheels have run into compatibility issues, so check your wheel setup before ordering. There is also some durability chatter and a bit of vibration in the feedback, which is typical for a thick 2-inch spacer and best handled with proper torque and a balance check.

Where it holds an edge: Grade 12.9 studs at 1000MPa, forged billet aluminum, anodized protection, and four spacers in the box.

The fit caveat to check first: The 78.1mm bore works for most trucks, but a 22-inch wheel setup has been a problem for some buyers.

Reach for this if: You tow, haul, or carry a load and want the highest stud rating on the list.

Verify before you order: Your wheel diameter and backspacing, especially if you run 22-inch wheels.

Ford Fit

8. dynofit 2inch 6×135 Wheel Spacers Ford F150

6×135 Pattern87.1mm Bore

Ford’s six-lug pattern gets its own forged set, with a true hub-centric 87.1mm bore.

F-150 owners need a different pattern from the GM crowd, and this set is built for exactly that. It runs a 6x135mm bolt pattern for 2004–2014 F-150, 2003–2014 Expedition, and 2005–2014 Lincoln Mark LT, and 2003–2014 Navigator. The hub bore is 87.1mm, and it is a true hub-centric design, meaning the spacer centers on your axle hub rather than the lug nuts. That is what keeps the wheel from wobbling at speed.

The materials are forged 6061-T6 aluminum, which resists fracture better than cast metal, and the studs are Grade 10.9 Dacromet bolts in an M14x2.0 thread. Dacromet is a sacrificial coating that fights rust. The full-length studs are designed for maximum thread engagement, which is what prevents the loosening that plagues cheap kits. Thickness is 2 inches (50mm), so you gain clearance for larger tires and can eliminate brake caliper rubbing.

The catch, and it is a real one, is vibration. Some shoppers say felt vibration above 60mph, which points to balance rather than the spacer itself. Have your wheels balanced after install and torque to spec, and most of that fades. One note worth flagging: this set does not fit trucks with a dually setup, so verify your axle before ordering.

What Ford owners get

  • 6x135mm pattern for 2004–2014 F-150 and related Ford models
  • True hub-centric 87.1mm bore centers the wheel properly
  • Forged 6061-T6 aluminum with Grade 10.9 Dacromet studs
  • Full-length studs for maximum thread engagement

Where to be careful

  • Some owners feel vibration above 60mph until wheels are balanced
  • Does not fit dually setups — check your axle first

The match for: An F-150 or Expedition owner on the 6×135 pattern who wants forged strength and a hub-centric fit.

Confirm first: Your truck is not a dually, since this set will not fit that axle.

Know the Specs

Bolt Pattern and Hub Bore

The bolt pattern is the number of lug studs and the diameter of the circle they sit on, like 6×5.5 for most GM half-tons or 8×6.5 for heavy-duty trucks. The hub bore is the round opening that sits over your axle hub. Get both numbers right and the spacer seats flat; get either wrong and it will not fit or will shimmy.

Thickness and Stud Grade

Thickness is how far the spacer pushes your wheel out — 1.5 inches for a mild change, 2 inches for more tire clearance. Stud grade tells you how strong the hardware is. A 10.9 or 12.9 grade stud holds torque better than standard hardware, and forged 6061-T6 aluminum resists cracking better than cast metal.

Common Questions

Will these wheel spacers fit my Silverado 1500?
Most likely, if it is a 1500 on the 6×5.5 (6×139.7mm) pattern. The Rough Country set covers 1988–2020 models, the ECCPP set covers 1999–2020, and the dynofit 6×5.5 set goes through 2026. Check your model year against the listed range and confirm your hub bore matches before ordering.
What is the difference between hub-centric and lug-centric spacers?
A hub-centric spacer centers on the raised hub of your axle, so the wheel spins true without relying on the lug nuts. A lug-centric spacer centers on the studs instead. Hub-centric designs tend to run smoother and are less prone to vibration, which is why most of the sets here are hub-centric.
Do I need to re-torque my lug nuts after installing spacers?
Yes. Dynofit’s own installation note recommends re-torquing the open-end lug nuts after 50–100 miles. A spacer adds a new joint between the hub and the wheel, and that joint can settle slightly after the first few drives. Re-torquing catches any loosening early.
Will 2-inch spacers make my truck ride worse?
Not if they are installed correctly. The vibration some buyers report usually comes from wheel balance or uneven torque rather than the spacer itself. EVIL ENERGY recommends a professional wheel balance after install, which is good practice for any thick spacer.
What torque should I tighten wheel spacers to?
The KSP and EVIL ENERGY sets both list a recommended torque of 85–95 ft/lbs. Follow your spacer maker’s spec and use hand tools rather than an impact wrench, since over-tightening can crack a bolt.
Do wheel spacers fit 8-lug heavy-duty trucks?
Only sets built for the 8×6.5 (8×165.1mm) pattern, like the KSP set for Ram 2500 and 3500. Most of the six-lug sets here are for half-ton trucks and will not fit an HD axle. Match the pattern first, then check the hub bore.
Will spacers work with my stock wheels and 22-inch rims?
It depends on the bore and backspacing. The Richeer set has had compatibility issues reported with 22-inch wheels, so check your wheel setup before ordering. A hub-centric spacer with the right bore is the safer bet for larger wheels.
How thick should my wheel spacers be?
Go with 1.5 inches if you want a modest stance change and your wheels already clear your brakes and suspension. Go with 2 inches if you need extra tire clearance or want a wider track. Both thicknesses are available here, so match the spacer to the clearance you actually need.
Are forged aluminum spacers better than cast?
Forged aluminum is denser and resists fracture better than cast metal. The dynofit and KSP sets are forged, and the Richeer set uses forged 6061-T6 billet. Cast kits can work, but forged ones hold up better under stress.

The Bottom Line

For most truck owners, the wheel spacers for trucks winner is the Rough Country 2″ Wheel Spacer, because it matches the GM 1500 hub bore, arrives with studs preinstalled, and is backed by a lifetime warranty. If you want four corners in one order with corrosion-resistant bolts, the OMT set is worth a look. And for an eight-lug heavy-duty axle, the KSP 8×6.5 set is the one to reach for. Match your bolt pattern and hub bore first, torque to spec, and re-check after the first few miles — that is what keeps a spacer quiet and safe.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top