Yes. Every iPhone 16 model plays audio through wired headphones plugged into its USB-C port, either directly with USB-C EarPods or through Apple’s USB-C to 3.5 mm Headphone Jack Adapter for traditional 3.5 mm headphones.
Apple replaced the Lightning port with USB-C across the whole iPhone 16 lineup — the iPhone 16, 16 Plus, 16 Pro, and 16 Pro Max — and USB-C wired audio is a supported use of that connector. No app, plan, or carrier setting stands in the way. What trips people up is the plug itself: there is no round 3.5 mm socket on the phone, so an adapter or a USB-C set is mandatory, not optional.
Below is what actually connects, the exact setup, and the mistakes that produce silence.
What Connects To An iPhone 16?
A USB-C audio accessory connects directly, and 3.5 mm headphones connect through Apple’s USB-C to 3.5 mm Headphone Jack Adapter. Apple’s own support documentation confirms USB-C wired audio as a supported connector use and sells the adapter for exactly this job.
- Apple EarPods (USB-C) — plug straight into the port. Apple’s stated requirement is simply a device with a USB-C connector.
- 3.5 mm headphones — any pair works once the Apple adapter sits between the plug and the phone.
- Third-party USB-C headsets — often work, but only if they support USB-C digital audio. Apple confirms USB-C wired audio broadly, not every third-party model.
- Lightning EarPods — the wrong connector for iPhone 16. They are built for Lightning devices.
- 3.5 mm EarPods without an adapter — no socket to receive them.
Buying decision, in one line: Our tested wired earphones for iPhone 16 roundup covers sets that fit each route.
How Do You Set Up Wired Headphones On iPhone 16?
Setup is plug-and-play — no pairing, no menu diving. The phone detects the accessory and routes audio automatically.
- Insert the USB-C EarPods connector, or the Apple USB-C to 3.5 mm Headphone Jack Adapter, into the phone’s USB-C port.
- Push the headphones’ 3.5 mm plug fully into the adapter until it clicks or seats flush.
- Start playback.
If sound stays on the speaker, the culprit is almost always a half-seated plug. Pull it out, reinsert firmly, and disconnect any other audio device. You can also confirm the active output in Control Center’s audio widget or inside the app you’re using.
For calls, keep expectations honest: Apple’s general compatibility statement covers audio output, not every third-party accessory’s microphone, in-line buttons, or remote functions. Apple’s own EarPods carry the mic and controls; a random USB-C headset may deliver sound only.
What Actually Causes Problems?
Most failures come from the wrong adapter or a misunderstood port, not from the phone. The single USB-C port handles headphones, so charging at the same time generally needs a hub with power pass-through — and Apple does not guarantee every hub’s audio, charging, mic, or control behavior.
- Lightning-to-3.5 mm adapter — built for older Lightning iPhones; it does not substitute for the USB-C adapter.
- Generic “USB-C” accessory — USB-C names the connector shape, not audio capability. Check for explicit USB-C audio support.
- Assuming wireless is required — AirPods and Bluetooth headphones are one option among several; Apple lists wired USB-C audio, Bluetooth, built-in speakers, and AirPlay as separate paths.
- Sweat, lotion, and makeup — Apple advises cleaning and drying wired headphones and the phone after exposure, and warns against running EarPods under water.
- Known skin sensitivities — Apple suggests checking EarPods materials and keeping the headphones and your skin clean and dry.
Worth noting for anyone weighing both routes: Apple gives an iOS 10-or-later requirement for Lightning EarPods and the Lightning-to-3.5 mm adapter, but no special iOS version, carrier, subscription, or regional restriction for the USB-C wired setup. It’s hardware, full stop. Apple’s official guide to using Apple wired headphones lays out the supported combinations.
Common Questions
Do I need a special iOS update for wired headphones?
No. Apple’s USB-C audio documentation lists no minimum iOS version, carrier requirement, or subscription for wired listening on iPhone 16. The requirement is a compatible USB-C audio accessory, or 3.5 mm headphones plus Apple’s USB-C to 3.5 mm adapter. Plug in and play.
Can I charge and listen at the same time?
Not with a plain cable — the single USB-C port is occupied by the headphones. Simultaneous charging generally requires a hub or adapter with power pass-through, and Apple’s instructions do not guarantee every hub’s audio, charging, microphone, or control behavior, so test your hub before relying on it.
Will any USB-C headset work with iPhone 16?
Not automatically. The headset must support USB-C digital audio and be compatible with iPhone. Apple confirms USB-C wired audio as a category but does not certify every third-party headset or adapter, so microphone and in-line button support can vary by model. Sound output is the reliable part.
Sources
- Apple Support. “Use Apple wired headphones” Confirms USB-C EarPods and the USB-C to 3.5 mm adapter as the supported wired routes.
- Apple Support. “Charge and connect with the USB-C connector on your iPhone” Documents USB-C audio as a supported connector use.
- Apple Store. Apple EarPods (USB-C) compatibility Lists the USB-C connector requirement for Apple’s USB-C EarPods.