RAM 1500 tailgate fitment follows generation and tailgate type, not model year alone — 2019-and-newer DT trucks take their own panel and hardware.
A tailgate from a 2015 Ram is not a bolt-on swap for a 2019. Three specs settle RAM 1500 tailgate dimensions and compatibility by year — generation, bed length, and tailgate type — not the badge. Every measurement below comes from RAM’s own published brochures.
RAM 1500 Tailgate Fitment: The Specs That Decide It
- Generation. The 2019 redesign introduced the DT body and the available 60/40 split Multifunction Tailgate. RAM lists that tailgate as a 1500 feature, and current Mopar accessories for it run 2019–2026.
- Bed length. RAM 1500 trucks come with a 5-foot-7-inch or 6-foot-4-inch box.
- Tailgate type. A conventional drop-down gate and a Multifunction gate are different assemblies, down to the hinges.
- Embedded hardware. Backup camera, tailgate-ajar switch, lock actuator, power-release motor, damping hardware, and connectors all vary by year and trim.
Cab style matters too — RAM’s brochures break dimensions out by Regular, Quad, and Crew Cab. Ordering on bed length alone is how wrong panels arrive with the wrong hinge spacing or no camera cutout. Pull the VIN, run a Mopar fitment lookup, and tape the old gate — hinge spacing, latch locations, panel width, mounting points — before you buy. Owners comparing finished options first can start with this tested roundup of Ram 1500 tailgate replacements.
Factory Bed And Tailgate Opening Dimensions
| Measurement | 5-ft-7-in Bed | 6-ft-4-in Bed |
|---|---|---|
| Floor length, tailgate closed (2019–2020 DT) | 67.4 in | 76.3 in |
| Cargo width, wall to wall (2019–2020 DT) | 66.4 in | 66.4 in |
| Width between wheelhouses (2019–2020 DT) | 51.0 in | 51.0 in |
| Bed depth (2019–2020 DT) | 21.4 in | 21.5 in |
| Tailgate opening width (2019–2020 DT) | 60.0 in | 60.0 in |
| Overall length, gate down (2015 generation) | 91.5 in | 100.2 in |
Two cautions. These are cargo-box and opening measurements, not the outer dimensions of a loose tailgate panel, so they cannot be used alone to order a replacement. Matching nominal bed lengths do not make two generations’ parts interchangeable.
Bed length constrains parts too. RAM lists 5-foot-7-inch, 6-foot-4-inch, and 8-foot boxes across its truck line, but the 8-foot box is not offered on a 1500, and the 5-foot-7-inch box is not offered on a 2500 or 3500.
Will A 2018 Tailgate Fit A 2019 RAM 1500?
No. The 2019 redesign moved the 1500 onto the DT body, so a 2009–2018 tailgate’s hinges, latches, and wiring will not line up with a 2019-or-newer truck.
The Multifunction Tailgate is where most confusion starts. Its two sections split 60/40, swing open to 88 degrees, and still drop down like a standard gate. RAM says the design keeps the bed reachable with most trailers attached, but also that remote power-tailgate control is not available with the Multifunction Tailgate — conventional power-release parts and Multifunction parts are not a swap. The 2019 brochure lists an aluminum tailgate with an integrated spoiler, standard locking, and available damping, ajar warning, and remote operation, so two trucks from the same year can carry very different rear hardware.
That is a 2027 claim, so it should not be carried back to older trucks or stretched to cover the swing-away sections.
Five checks before you order:
- Model year, VIN, cab style, bed length, drivetrain, trim, and tailgate type, written down.
- Hinge spacing, latch locations, panel width, and mounting points measured off the existing gate.
- Camera, ajar switch, lock actuator, power-release motor, damping hardware, and connector count.
- OEM or Mopar fitment lookup by VIN rather than by nominal bed length.
- Conventional or Multifunction confirmed before any accessory goes in the cart.
Common Questions
How Wide Is The Tailgate Opening On A RAM 1500?
On 2019 and 2020 DT-generation trucks, the opening is 60.0 inches on both the 5-foot-7-inch and 6-foot-4-inch beds. Width between the wheelhouses is 51.0 inches, the number limiting what actually slides in. Earlier generations use different body dimensions, so measure the truck in front of you rather than trusting another year’s spec sheet.
Is A Multifunction Tailgate Interchangeable With A Standard One?
No. The two use different hinges, latches, trim, and control hardware, and RAM states that remote power-tailgate control is not available with the Multifunction design. Treating a Multifunction truck as conventional when ordering leads straight to returns. Verify the complete assembly, wiring, camera provisions, and control module before buying anything that bolts to the rear of the truck.
What Is The Tailgate Load Limit On A RAM 1500?
That figure is published for 2027 trucks, so it should not be assumed for earlier model years, and it does not cover the Multifunction gate’s swing-away sections. Keep the gate fully latched while driving and clear any ajar warning before moving.
Sources
- Ram Trucks. “2019 Ram 1500 eBrochure.” Source for DT-generation cargo box and tailgate opening dimensions, plus tailgate equipment.
- Ram Trucks. “2015 Ram 1500 Brochure.” Source for earlier-generation bed measurements, cab styles, and open-tailgate overall length.