3 Best RAM 1500 Tailgate | Paint It Once, Bolt It On

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

A dented or rusted tailgate is the one body panel on your truck you look at every single day, and the fix is simpler than most owners think. You do not need a body shop to get back to a flat, flush rear panel. You need a steel shell that bolts onto your existing mounting points, matches your cab color, and lines up with the latches and cables already on the truck. The three picks below cover the whole spread: a primered shell you paint yourself, a heavier pre-painted panel in PW7 Bright White, and a budget-friendly bare-steel option for the owner who is watching the wallet.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Fitment is where most tailgate purchases go wrong, so every pick here is model-specific and needs a check against your trim before you buy. What follows is the honest breakdown of what you get in each ram 1500 tailgate option and which truck each one actually suits.

Top Picks

BUMPERS THAT DELIVER CH1900129 Steel Tailgate Shell
Best OverallBUMPERS THAT DELIVER CH1900129 Steel Tailgate Shell4.0+★100+ ratingsThe straight answer for a dented gate: a factory-shape steel shell you paint to match. This is the pick for the owner who wants the panel done right and does not mind a weekend with a spray gun.Check price on Amazon

How To Choose The Best RAM 1500 Tailgate

Buying a tailgate is a fitment purchase, not a style purchase. Get the trim and cab configuration right and the panel drops onto the hinge points and latches the way the factory part did. Get it wrong and you are stuck with a steel slab that does not close flush. Here is what to nail down before you order.

Check your trim before you check anything else

Every shell on this list is built as a direct replacement for the 2010-2018 RAM 1500, 2500, and 3500 body, and several also cover the 2019-2024 1500 Classic. The catch is the lettering. If your truck came with the large R-A-M stamped letters on the tailgate — the Limited, Rebel, TRX, Power Wagon, and Night trims — these shells will not line up with that panel. Walk to the back of your truck and look before you order anything.

Primered, painted, or bare: match your prep tolerance

A primered shell arrives with a paint-ready coating and needs a color coat before it looks finished. A painted-to-match shell arrives already shot in a factory color like PW7 Bright White, so the job is bolting it on. A budget shell with an electrophoresed black primed finish sits in the middle — sealed and ready, but still a color match away from blending in. If you own a spray gun and can match your code, the primered shell saves money; if not, pay for the pre-painted PW7.

Weight and hardware tell you what is missing

Steel shells here range from 42.8 pounds up to 52 pounds, and that spread usually reflects the gauge of the steel rather than any accessories. Thin steel flexes under a load and can rattle on rough pavement. Also read the hardware line closely. Some shells include the panel only and expect you to reuse your existing bolts, which is fine if your old hardware is rust-free. Know what is in the box before you pull the old gate off.

Plan for the accessories you have now

If your truck has a backup camera, a tailgate assist strut, or a bed extender bracket, factor those into the job. A shell is a bare panel, so you are moving your own hardware over. That is a bolt-up afternoon for most owners, but it is worth setting aside the time and a clean work surface before you start.

Side-by-Side Comparison

Model Best For Finish Weight Dimensions Amazon
BUMPERS THAT DELIVER CH1900129 Steel Shell★ Best Overall Painting to your own color Primer 50 pounds 26″D x 66″W x 9″H Amazon
Kojem Rear Tailgate for Ram 1500/2500/3500 Tight budgets and a weekend bolt-up Electrophoresed black primer 42.8 pounds Package: 63.5 x 24 x 8 inches Amazon
MBI AUTO Painted PW7 Bright White Steel Tailgate Matching a PW7 Bright White truck Painted to match PW7 52 pounds 66 x 6 x 26 inches Amazon

Detailed Reviews

★ Best Overall

1. BUMPERS THAT DELIVER CH1900129 Steel Tailgate Shell

Our pick — 4.0+★ from 100+ verified ratings; the strongest balance of quality and price.

Primed and Paint-ReadyPre-Drilled Holes

The straight answer for a dented gate: a factory-shape steel shell you paint to match.

This is the pick for the owner who wants the panel done right and does not mind a weekend with a spray gun. BUMPERS THAT DELIVER builds it as a direct replacement for the 2010-2018 RAM 1500, 2500, and 3500, and it also drops onto the 2019-2024 1500 Classic. The exterior is bare primer, which means you are responsible for the color coat — but you also get to match your truck exactly instead of settling for a close factory white.

The panel comes pre-drilled with the mounting holes already in place, so the install is a bolt-up job onto your existing points. It weighs 50 pounds, and the 26″D x 66″W x 9″H footprint lines up with the factory gate. The Limited, Rebel, Power Wagon, and Night trims with R-A-M lettering are ruled out — check your tailgate stamp before you order. The seller also offers a painted version of the same shell if you would rather skip the spray work entirely.

Reviewers praise the steel build quality first and the factory-style fit second. Panel gaps close up, the latch catches clean, and the shell reads as a proper body part rather than a slab bolted on. The one honest catch is that bare primer demands real prep. If your color match is off or your spray pattern is patchy, the panel will look like a repair, not a factory part. That is a paint-prep issue, not a shell defect, which is why some owners pay the seller to shoot the color before shipping.

Where it earns the top spot

  • Factory-shape steel shell that bolts onto the existing hinge points and latches with pre-drilled holes
  • Primed exterior is paint-ready, so you can color-match your own truck instead of accepting a close white
  • 50-pound steel panel with the same 26″D x 66″W x 9″H footprint as the factory gate
  • Covered by a 1-year manufacturer warranty

What to plan for

  • Bare primer means you supply the color coat and the spray time — no paint included
  • Does not fit Limited, Rebel, Power Wagon, or Night trims with R-A-M lettering

Reach for this if: your truck is a standard 2010-2018 1500, 2500, or 3500 and you want the best overall shell with a paint-ready finish.

Look elsewhere if: your tailgate carries R-A-M lettering from the factory — this shell will not line up with that panel.

Painted Match Pick

2. MBI AUTO Painted PW7 Bright White Steel Tailgate

Pre-Painted PW7OE Equivalent Fitment

Shows up already shot in PW7 Bright White, so the whole job is bolting it on.

If your truck rolled off the line in PW7 Bright White, this shell is the one that skips the spray booth entirely. MBI AUTO paints it to match that factory code before it ships, so the panel arrives in your color with the pre-drilled mounting holes already in place. The install is a straight bolt-up onto the 2010-2018 RAM 1500, 2500, and 3500 body, and it also fits the 2019-2024 1500 Classic.

It is the heaviest shell here at 52 pounds, against 50 pounds for the primered pick and 42.8 pounds for the budget pick. That extra steel shows up in the way the gate feels under a load — you are not getting the flex that comes with thinner panels. The 66 x 6 x 26 inch footprint matches the factory gate shape, so the latches and cables already on your truck line up. Weight is the spec that matters most here, because a heavier shell tends to hold its shape when you drop it or lean on it.

Reviewers consistently praise the PW7 color match and the flush fit. Buyers report the PW7 white matches closely enough to pass as factory, and the panel sits flush without shimming. The honest caveat is trim fitment: Limited, Rebel, TRX, Power Wagon, and Night models with large R-A-M tailgate letters are not supported, same as the other shells here. If you drive one of those trims, this is not your part.

The finish is the whole pitch: a pre-painted PW7 shell turns a multi-step body job into an afternoon bolt-up. No primer, no color coat, no dry time.

The trade-off to accept: at 52 pounds it is the heaviest option on the list, so plan for a second set of hands when you hang it on the hinge points.

Who it beats: the primered shell above, for anyone with a PW7 truck who would rather not spray.

Who it does not: owners of Limited, Rebel, TRX, Power Wagon, or Night trims with the large R-A-M stamp.

Budget Bolt-On

3. Kojem Rear Tailgate for Ram 1500/2500/3500

42.8 PoundsSealed Black Primer

The leanest spend in the group — and the lightest steel, at 42.8 pounds.

Start with the honest part: this is the lightest and cheapest shell in the lineup, and those two facts are related. Kojem builds it from steel with an electrophoresed black primed finish — a coating that seals the metal and gives you a base for paint. At 42.8 pounds it sits well under the 52-pound MBI AUTO shell above, and that gap tells you less steel is in the panel. For a tailgate that mostly swings open and shut on a working truck, that can be fine. For one that takes a load or gets leaned on daily, you will notice the difference.

Fitment coverage is broad on paper. It replaces CH1900129 68105727AE and is compatible with the 2010-2018 Ram 1500, 2500, and 3500, the 2009 Ram 1500, and the 2019-2024 1500 Classic. The R-A-M lettering exclusion applies again — Limited, Rebel, TRX, Power Wagon, and Night trims are out. The install is a direct bolt-on using the existing mounting points, but the seller ships it with no mounting hardware and no instructions, so you reuse your own bolts and figure the sequence out yourself.

Price is the draw here, and reviewers agree it delivers for the money. It is a fair-priced way to get a panel back on a truck. The trade-off is alignment — the recurring gripe is that the shell can need coaxing to sit flush, and some units feel thin once they are bolted on. That is the price of the lighter steel. For a work truck or a flip that just needs a functional gate, it does the job. If you want factory-level gaps, spend up to the painted pick above.

Why the wallet likes it

  • Broad fitment: 2009-2018 Ram 1500/2500/3500 and 2019-2024 1500 Classic coverage
  • Electrophoresed black primed finish seals the steel and takes paint
  • Direct bolt-on using the truck’s existing mounting points
  • At 42.8 pounds it is the easiest of the three to hang solo

What you give up

  • Alignment can take coaxing to sit flush — factor in extra fit time
  • Ships with no mounting hardware and no installation instructions
  • Same R-A-M lettering exclusion on Limited, Rebel, TRX, Power Wagon, and Night trims

Best for: the owner watching the budget on a 2009-2018 Ram who needs a functional gate and does not need factory gaps.

Think twice if: you want a panel that drops on and lines up without fiddling — the alignment work is the trade-off here.

Know the Specs

Finish: Primer, Sealed Primer, or Painted

You can bolt on a painted shell and drive, or you can spray a bare one yourself. Primer is a protective base coat, not a color. A primered shell like the BUMPERS THAT DELIVER unit needs a color coat before it looks finished, so you supply the spray time and the color match. An electrophoresed black primed finish (a factory-applied black coating that seals the steel) gives you a paintable base, but it still wants a color coat. A painted-to-match shell like the MBI AUTO PW7 arrives already in a factory color, so the job is bolt-up only. Pick based on if you want to spray.

Weight as a Proxy for Steel Gauge

Two shells here come in at 50 pounds and 52 pounds, one at 42.8 pounds. In bare steel body panels, that number usually tracks the gauge of the steel rather than any accessories. A heavier shell holds its shape under a load and tends to rattle less on rough pavement. A lighter one is easier to hang solo but can flex and take more coaxing to sit flush. If you lean on the gate or haul loads, the heavier 50- and 52-pound shells hold their shape better; the 42.8-pound Kojem is easier to hang but may need more coaxing to sit flush.

Common Questions

Will these tailgates fit a 2019 RAM 1500 Classic?
Yes — all three shells here cover the 2019-2024 RAM 1500 Classic. The BUMPERS THAT DELIVER and MBI AUTO units also list the 2019 RAM 1500 series, and the Kojem shell lists the 2009 Ram 1500 as well. The trim exclusion still applies, so check your tailgate stamp first.
Why do Limited, Rebel, and Night trims not fit these shells?
Those trims came with large R-A-M letters stamped into the tailgate panel itself. The shells here are built to the standard flat panel shape, so the lettering area will not line up. All three picks carry that exclusion, so if your truck has the R-A-M stamp, these are not your parts.
Does a painted-to-match tailgate cost more than a primered one?
The pre-painted MBI AUTO shell in PW7 Bright White sits at the top of this group, and the primered BUMPERS THAT DELIVER shell sits below it. You are paying for the paint work to be done before it ships. If you already own a spray gun and your color is easy to match, the primered shell can be the better value.
Is mounting hardware included with these tailgates?
Not on the Kojem shell — it ships with the panel only, and the seller states mounting hardware is not included, so you reuse your existing bolts. The BUMPERS THAT DELIVER and MBI AUTO shells come with pre-drilled mounting holes and are designed to bolt onto the existing points. Check your old hardware for rust before you start.
Can I move my backup camera and tailgate assist to a new shell?
A tailgate shell is a bare steel panel, so any camera, assist strut, or bed extender bracket on your current gate has to be moved over from the old one. Plan for that as part of the install. None of the three shells here include those accessories.
How heavy is a RAM 1500 tailgate shell to hang?
The three shells here run 42.8 pounds, 50 pounds, and 52 pounds. The lighter Kojem unit is the easiest to lift into place by yourself, while the 52-pound MBI AUTO panel is better with a second set of hands on the hinge points. Have your bolts and a socket ready before you lift.
Does a primered tailgate need to be painted before installation?
You can bolt a primered shell on as-is, but it will read as a grey repair panel rather than a finished gate. The primer is a base coat, not a color. Painting first is the cleaner route, and it is why some owners pay the seller to shoot the color before shipping.
Is a steel shell better than a used factory tailgate?
A new steel shell like the BUMPERS THAT DELIVER unit arrives undented, pre-drilled, and covered by a 1-year manufacturer warranty. A used factory gate may match your paint already but can carry rust or hidden dents. If your color is common and your trim is standard, a new primered shell is the safer buy.
Where do I find my RAM 1500 paint code?
The paint code is usually on the driver’s side door jamb sticker, listed as a short alphanumeric code. The MBI AUTO shell here is shot in PW7 Bright White specifically. If your code is different, order the primered shell and have it painted to your code instead.
Will a tailgate shell fix a gate that will not latch?
A new shell fixes a damaged panel, not a worn latch. If your gate sags or will not catch, the problem is usually the latch mechanism or the hinge, not the steel. Replace the shell when the panel itself is dented or rusted. Diagnose the latch separately before you order.

The Bottom Line

The ram 1500 tailgate winner is the BUMPERS THAT DELIVER CH1900129 shell, because it gives you the factory panel shape with pre-drilled holes and a paint-ready finish you can match to your own truck. If your truck is PW7 Bright White and you would rather skip the spray booth, the MBI AUTO painted shell arrives already in your color at 52 pounds of steel. And for a working truck on a tight budget, the Kojem rear tailgate gets a functional panel back on at 42.8 pounds, provided you have the patience to dial in the alignment.

One last nudge: walk out and look at your tailgate lettering before you order anything. That single detail decides which of these three you can actually bolt up.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top