Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your washer stopping mid-fill, dribbling onto the floor, or flooding past the right level almost always traces back to one small part: the water inlet valve. This guide breaks down which Whirlpool-compatible replacements actually match your model number, how the hot and cold sides differ, and which picks hold up best when a household runs load after load.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Matching the exact part number to your machine is the whole game here, since a valve that looks right can still leave you with a leaking or no-fill washer. Below you’ll find a straight breakdown of the whirlpool washing machine water inlet valve options worth your time.
Top Picks



How To Choose The Best Whirlpool Washing Machine Water Inlet Valve
An inlet valve is a small plastic-and-metal block with solenoid coils (electrically operated shutters) that pop open when your washer’s control board tells them to. Hot water comes through one side, cold through the other, and the board mixes them to hit your selected temperature. When a coil dies or a seal wears, you get exactly the symptoms buyers describe most: no fill, endless fill, or a puddle under the machine.
Match the part number, not the brand name
Whirlpool, Maytag, Amana, Roper, Crosley, Admiral, and Inglis machines share a lot of internals, so one valve can often serve several badges. The safe move is to pull your washer’s full model plate — the whole string of letters and digits — and cross-check it against the listing’s fit list. A valve that “looks the same” but carries a different part number can mount differently at the terminals.
Hot side, cold side, or both
Some listings ship a single valve body for one temperature side; others ship a paired hot-and-cold set. If only one side has failed you can often replace just that half, but many buyers replace both while the machine is already open. A two-piece pack saves a second teardown later, which is why it earns repeat praise in the reviews.
Coils, ports, and connection type
Look at how many ports (inlet openings) the valve has and whether the connections are threaded, compression, or barb-style. Your existing hoses are cut to fit that style, so matching it keeps the job to a screwdriver and a towel. The coil count — often described as a “2 coil cold water valve” — tells you how many temperature paths the body controls.
What the reviews keep circling back to
Across nearly every pick here, buyers land on the same three things: it works on the first try, it fits like the original, and it installs without a repair visit. Leakage shows up as a mixed topic rather than a pattern — most units seal fine, a few don’t, and proper thread tightening is usually the difference.
Side-by-Side Comparison
| Model | Best For | Part Numbers | Ports / Items | Connection | Amazon |
|---|---|---|---|---|---|
| YUUCOO W11101906 W11210463★ Best Overall | Broad brand coverage | W11101906, W11210463 | 1 item | Threaded | Amazon |
| Saiyugty W11036930 W11316256Front-Load Match | Front-load cold valve | W11036930, W11316256 | 2 ports | Threaded | Amazon |
| Semzohc W10240948 + W10240949Hot and Cold Set | Hot and cold pair | W10240948, W10240949 | 4 ports | Flare | Amazon |
| Blutoget W10240949 + W10240948 | Two-year cover | W10240949, W10240948 | 2 pieces | Compression | Amazon |
| AUGSMIAR W10683603 | Leak-free sealing | W10683603 | 2 ports | Threaded | Amazon |
| Semzohc W11210459 | Keeps things simple | W11210459 | 2 ports | Threaded | Amazon |
| FOMIUZY W11101906 | Clear model matching | W11101906 | 1 pack | Threaded | Amazon |
| YUUCOO W10869800 W11038689 | Leak symptom repair | W10869800, W11038689 | — | Barb | Amazon |
| Whirlpool W11165546 | Authorized OEM part | W11165546 | 1 item | Threaded | Amazon |
Detailed Reviews
1. YUUCOO W11101906 W11210463 Washer Water Inlet Valve
Our pick — 4.5+★ from 500+ verified ratings; the strongest balance of quality and price.
One valve body that swaps across six washer badges and ships with a year of cover behind it.
If your machine is an older Whirlpool-family washer and you want the widest safety net, start here. The part is built from ABS plastic (a stiff, impact-resistant plastic) chosen for corrosion resistance, so it resists rust over years of damp laundry-room air. The threaded connection is described as firm and well sealed — the hoses screw on tight and stay tight without a drip forming at the joint. The listing also calls out extra material thickness compared with a stock valve, which matters when your household runs multiple loads a week.
The cover list is what earns it the top slot: Admiral, Amana, Crosley, Inglis, Roper, and Whirlpool machines are all named, and the part crosses to W10701461, W10869803, W10883458, W11038696, and W11210463. That matters because a replacement valve that matches on one part number but not the other gets returned. It also addresses the four failures you’d actually notice — no fill, water that won’t stop filling, uneven hot and cold, and visible leakage near the valve.
The honest catch is the seal. Most of these go in clean, but a handful of units still drip after install, and the review pages split on how long one lasts versus a stock part. The fix in practice is not over-torquing the threads and checking the screens before you button the machine back up. For anyone replacing a tired valve on a machine they intend to keep, that’s a small risk against a part that does the job.
What wins people over
- Crosses to six Whirlpool-family brands on a single part
- Threaded inlets described as firm and well sealed
- ABS build rated for corrosion resistance
- 1-year warranty backs the part
Where it can bite
- A few units still drip after install
- Durability is split against a stock valve
Best fit for: older Whirlpool, Amana, Roper, or Crosley owners who want one part that covers a lot of ground.
Check first: confirm your full model string against the cross-reference list before you order.
2. Saiyugty W11036930 W11316256 Washer Water Inlet Valve
A cold-side valve built to slot straight into the front-load models that so many replacements miss.
The spec that decides this one is the electrical rating: 120V at 60Hz with a 2 coil cold water valve, driving two ports. In plain terms, that’s a valve rated for standard household current, with two solenoid shutters inside one body — one of the coil-driven doors a washer’s control board opens to admit cold water. The listing names it as a cold water valve, so if your hot side is fine and only the cold has gone, this is the half you need.
Where it pulls ahead of the YUUCOO above is front-load fitment. Unlike the broad-crossover pick, this one names specific front-loaders — MHW5630HW1, MHW6630HW0, WFW560CHW0, WFW8620HW1, and many others in that family — so a front-load owner has a much tighter match. It carries two ports against the four-port hot-and-cold pair further down this list, which is simply the difference between a single-side valve and a full set. Brand cover reaches Whirlpool, Amana, Maytag, Magic Chef, Admiral, Norge, Roper, and Inglis, and a 2 year warranty sits behind it.
The install is described as unplug, shut off both supply valves, glove up, and swap the body — a job that fits a screwdriver and a towel. What buyers come back to is that it fits like the original and takes minutes rather than a service call. One fair note on the reviews: money-saving shows up as a mixed theme rather than a clean win, so go in expecting a part that works, not a guaranteed budget home run. The threads are the other spot to watch — snug them, don’t crank them.
Why it earns its place: front-load owners are the hardest group to fit, and this valve names those model strings directly instead of asking you to gamble on a look-alike.
One caveat worth knowing: the money-saving banner is less consistent in the reviews than the fit and function praise, so buy it for the match, not the savings pitch.
Reach for this if: your front-load Whirlpool or Maytag has lost its cold fill and you want the exact matched valve.
Look elsewhere if: both sides have failed and you’d rather replace the whole set in one go.
3. Semzohc MVWX655DW1 W10240948 + W10240949 Valve Pair
Both temperature sides in one box, so the second failure never sends you back to the parts site.
Here’s the comparison that matters most in this whole guide: this pack brings four ports and two pieces, while the Saiyugty valve above carries two ports in a single piece. That’s the difference between fixing one side now and fixing both sides while the machine is already pulled out and unplugged. The kit includes one W10240948 hot valve and one W10240949 cold valve, so the fill level and the mix of hot and cold both get handled by fresh parts.
The design goal is temperature balance. These two valves help control how much water enters the bucket and even out the hot-to-cold ratio, which is exactly the job when your washes come out scalding or lukewarm instead of the setting you picked. Symptoms it targets are a water level that won’t behave and leakage at the valve body. The fit lists are deep, covering Whirlpool models from the MVWX655 series through the WTW5500 line, and Maytag machines from 7MMVWX500 through MVWX700.
What lands with owners is performance — it runs like new again, in the pages’ own words, and the install stays straightforward. The connection type here is flare, so check that your hose ends match a flare fitting before you commit, since that’s the one spec that separates this kit from the threaded picks around it. Matching it is a two-minute check at the back of the machine and saves you a return.
The value read: two valve bodies for a hair more than a single-side part is the arithmetic that makes a pair worth it — you’re buying the second repair in advance.
The trade-off: the flare connection is a different fitting from threaded, so confirm your hoses before ordering.
Ideal for: Whirlpool or Maytag owners chasing a temperature problem who’d rather swap both sides at once.
Not the one for: machines with threaded hose ends where a flare kit won’t marry up.
4. Blutoget W10240949 W10240948 Inlet Valve
The same hot-and-cold pair idea, but with reinforced threads and a two-year promise behind it.
This is the direct rival to the Semzohc pair above, and the split depends on build and back-up. Both ship a cold and a hot valve in one pack; Blutoget adds reinforced thread work described as not easy to break, plus an ABS, metal, and rubber construction. The included components list spells it out: 1 x W10240949 cold valve and 1 x W10240948 hot valve. If the failure you’re chasing is a cracked or stripped inlet thread rather than a dead coil, that reinforcement is the reason to choose this over the flare kit.
The warranty is the loudest number in this review: a 2 year guarantee on both valve bodies. Two years of cover matters when a failed valve means opening the machine again. Fit runs to Whirlpool, Maytag, and Kenmore machines, with Kenmore 110-series model strings and Whirlpool 7MWTW and 7MMVWX families both named. It solves the same four symptoms — continuous water intake, damaged inlet threads, a leaking valve, and a machine that won’t fill properly.
Buyers report it working like new and handling a normal daily load count without trouble, and the no-more-leaks theme comes through clearly for most. The install write-up suggests watching a walkthrough video first and shutting off power and water, which is sound advice for a first-timer. One thing to note: the connection here is compression, not the threaded or flare fittings elsewhere on this list, so that’s your match check.
Reasons to pick it
- 2 year guarantee on both valve bodies
- Reinforced threads that resist cracking
- Covers Whirlpool, Maytag, and Kenmore strings
- Two valves in one pack
Keep in mind
- Compression fitting differs from threaded options
- Not a single-side replacement if you only need cold
Worth it for: owners who’ve been burned by a stripped inlet thread and want reinforced metal plus a long guarantee.
Think twice if: your hose ends are threaded and you don’t want to change the fitting.
5. AUGSMIAR W10683603 Washer Water Valve
For the washer that’s dripping onto the floor, not the one that won’t fill at all.
A leaking valve is its own kind of headache — the puddle builds slowly, then you’re pulling the machine away from the wall. This W10683603 body carries a metal build with a stainless steel exterior finish and a threaded inlet with a 1 inch connection size, so the hose seals onto a solid metal thread rather than a softer plastic one. It runs two ports and handles water level, drainage, and hot-cold balance in one part.
The cross-reference list is long: W10423125, W10683680, 3451320, AP6023768, PS11757114, and EAP11757114 all land here. Brand cover reaches Whirlpool, Kenmore, Amana, Maytag, Crosley, Inglis, Roper, and Admiral. Buyers describe the fit as perfect and the install as plug-and-play, which above all else is what you want from a hard part: no fighting the mounting points.
Stopping leaks is the theme it’s bought for, and function is what the pages respond to most. Not every unit seals clean, though — leakage shows up as a mixed topic rather than a clean sweep, and replacement-part opinions follow a similar split. Mixed leak reports make cleaning the inlet screens and hose washer before install the step that matters. Clean screens and a fresh washer are what let the threaded inlet seal.
What it does well: a stainless-finished metal body with a threaded 1 inch inlet is a sensible upgrade for a machine whose old valve has been weeping.
What to watch: seal quality is the variable, so verify the screens and hose washer are clean before install.
Pick this if: your washer has water pooling near the valve body and you want a metal-seated replacement.
Hold off if: your problem is no fill at all and the hot-cold balance is fine — a paired set may serve you better.
6. Semzohc W11210459 Washer Water Inlet Valve
Single valve, two ports, and the easiest install in the group — for the buyer who just wants the fill back.
This is the plainest option here: one valve body, two ports, threaded connection, plastic housing. It’s built to fix leaks, irregular water flow, temperature problems, and the two extremes of no fill and endless fill. For a normal laundry load and a dead valve, one threaded body in and one out is all this repair asks.
The fit spans further than you might expect for a single valve. Whirlpool models run WTW4616FW0 through WTW5000DW2, Maytag machines run MVWC215EW1 through MVWC555DW1, Amana NTW models are named, and Kenmore’s 110-series strings all appear. Replaces W11210459, AP6329217, W10701459, W10838319, W10869799, W11025984, W11038711, and W11210459VP — a long enough list that confirming your match should take seconds, not studying a parts diagram.
Buyers consistently come back to how easy this valve is to install. The fit on Whirlpool washers gets called perfect, and the process stays short. This is a mid-tier rating in the group rather than the highest finish, so set expectations there: it does the job it’s sold for, and it’s the kind of part you buy when the goal is a working washer this weekend, not a piece to inspect under a magnifier.
The straightforward pick: one part, two ports, threaded inlets — the least fussy valve here for restoring the fill.
The honest limit: it’s a single valve, so if both temperature sides have given up, look at a paired kit instead.
Made for: the no-fuss repair where the old valve failed and a simple swap gets the machine running.
Better to pair: if you’re already sensing both sides are tired, jump to the hot-and-cold packs above.
7. FOMIUZY W11210463 W11101906 Inlet Valve
The valve that tells you exactly which washers it fits — and which ones it doesn’t.
Most parts listings give you a wall of model numbers and hope. This one leads with a warning: match the complete model number, including its final letters and digits, and check your original valve’s mounting points and terminals before ordering. For a first-time repair, that’s the difference between a part that drops in and one that goes back in a box. The body uses brass and stainless steel, with separate red and blue valve bodies marking hot and cold, and integral support ribs and mounting posts molded into the housing.
The fit list is tight and named: Amana NTW4516FW2, NTW4516FW3, NTW4516FW4, NTW4605EW1; Inglis ITW4671EW1, ITW4871FW3, ITW4971EW1; Whirlpool WTW4616FW3 and WTW4816FW3; Crosley CAW11544EW2 and CAW8350EW2; Roper RTW4516FW2; and Admiral ATW4516MW0. Replaces W11210463, W11101906, W10701461, W10883458, W10869803, W11038696, and AP6329219. That’s a shorter list than the broad-crossover valve at the top, and it’s deliberate — narrower claims, fewer surprises.
Reliability is what buyers respond to most, with the install and build quality close behind. There is one real caveat: a durability note flags a unit that lasted three months before breaking. That’s a rare report against a strong reliability consensus, not a pattern, but it’s the detail to weigh if you want the longest runway. Service life varies with water quality, pressure, and installation, so a clean water supply and careful snugging are your friends here.
The smart-buyer angle: a parts listing that tells you to compare mounting points and terminals before ordering is one written by people who’ve handled the returns.
The one note: a lone durability report exists, so treat the install per the instructions and check for leaks after.
The right call for: Amana, Inglis, Crosley, Roper, or Admiral owners whose model is on the named list and who want a brass-and-steel body.
Look elsewhere if: your machine isn’t on the application list — this one deliberately doesn’t cast a wide net.
8. YUUCOO W10869800 W11038689 Washer Water Inlet Valve
A brass-bodied valve aimed squarely at the leaking, won’t-fill machine that’s already pulled out.
The connection is the number that decides this one: barb inlets, which means the hose slides onto a ribbed fitting and clamps down rather than screwing on. If that’s what your machine uses, you need it — a threaded valve won’t substitute. The body is brass, and the maker says the performance, quality, and service life meet OEM standards after testing. It targets a failed original valve showing leaks, no fill, or fill that won’t stop, and the barb fitting makes it the quickest swap here.
The replacement list is deep: 4455378, AP6039690, PS11773194, EAP11773194, W11210459, and W10869799 all appear, alongside model strings from 8TWTW4955JW0 and 8TWTW6000JW0 through ATW4675EW0, CAW42114GW2, ITW4671EW0, MVWC465HW3, MVWC565FW0, and NTW4605EW0. Brand cover reaches Whirlpool, Maytag, Amana, Inglis, Kenmore, Crosley, and General Electric washers — with the honest note that not every model is covered, so the picture and description are meant to be checked first.
On the pages, owners describe it as good as the original and perfectly fitted in Whirlpool washers, with the install staying easy. Stopping a leak is the theme it’s bought for, and on that it mostly delivers. Leakage stays a mixed topic rather than a settled one, so if your drip is coming from somewhere other than the valve — a cracked hose or a clogged screen — replace the valve and check those too.
What it brings: a brass body with barb inlets, designed for the machines that take that fitting style and nothing else.
Check before you buy: make sure the fit list actually covers your model, since this one openly says it’s not universal.
Best for: washers with barb-style hose inlets and a valve that’s leaking or failing to fill.
Skip the guess: if your hoses are threaded or compression, this body won’t connect.
9. Whirlpool W11165546 Water Inlet Valve
The factory part, from the brand that built the machine, for buyers who won’t gamble on a look-alike.
This is the only valve on the list carrying the Whirlpool name as the manufacturer rather than a third-party maker. It’s listed as an OEM Authorized part, model W11165546, made in the United States, in metal with a threaded inlet and a chrome finish. For anyone whose machine failed young, the appeal is simple: the company that engineered the washer built this part to spec, and it removes the question of whether a cross-referenced number will actually mount the same.
Its install feedback is the strongest of the nine valves here. Owners mention a roughly 15-minute install that restores water flow and stops leaks. Fifteen minutes puts the swap inside a lunch break, provided your model matches. Whirlpool’s own returns policy covers 30-day returns and 90-day defective returns, which is a narrower window than the multi-year guarantees on the third-party parts above.
The one caveat is longevity. Durability shows up as a concern in the feedback, with owners reporting that it doesn’t last as long as they’d like for a factory part. That’s a real point against it given the premium tier, and worth weighing honestly: you’re paying for authenticity and a fast install, not a promise of a decade of service. If your priority is the longest possible runway between repairs, a reinforced third-party body with a multi-year guarantee is the more defensive buy.
Why it holds a premium spot: an OEM Authorized Whirlpool part made in the USA, with a 15-minute install and no cross-reference guesswork.
The trade-off: durability is the weak link reported here, and the return window is 30 days with 90 days for defects — shorter cover than the multi-year options.
Go with this if: you want the factory Whirlpool part and a quick, straightforward swap on a matched model.
Better to weigh: if you want the longest warranty runway, the reinforced two-year options above fit that bill.
Know the Specs
Part numbers and cross-references
A part number like W10240948 is the factory’s ID for one specific valve body. Listings show a “replaces” list because one body often fits several part numbers across brands. The safe move is to match your machine’s full model string — every letter and digit — against the listing’s fit list, then compare the cross-reference numbers.
Hot side vs. cold side
A washing machine pulls hot and cold water through separate valve bodies, then mixes them for the temperature you chose. Some listings sell one side; others bundle hot and cold. If only one side has failed you can replace just that half, but most buyers swap both while the machine is open.
Ports and connection type
Ports are the inlet openings on the body — often 2 or 4 on these parts. Connection type describes how the hose attaches: threaded (screws on), compression (a compressed fitting), flare (a flared fitting), or barb (slides onto a ribbed stub and clamps). Your existing hoses are built for one style, so match it or the part won’t connect.
Coils, voltage, and solenoid function
The solenoid coils are the electrically driven shutters that open and close the water path. A rating like 120V at 60Hz tells you it’s built for standard household current. A “2 coil cold water valve” means two of those shutters sit inside a single cold-side body. When a coil fails, the valve stops opening or won’t close, which shows up as no fill or endless fill.
Common Questions
How do I confirm a valve fits my exact Whirlpool washer?
Can I replace just the hot or cold side instead of both?
What do the symptoms no fill or endless fill point to?
What is the difference between threaded, flare, compression, and barb connections?
How long does an inlet valve replacement take to install?
Do I need to shut off the water before installing a valve?
Is the OEM Whirlpool valve worth choosing over a third-party part?
What warranty should I look for on an inlet valve?
Why does a brand-new valve still leak after install?
Can one valve body cover more than one washer brand?
The Bottom Line
For most buyers, the winning whirlpool washing machine water inlet valve is the YUUCOO W11101906 W11210463 — one valve body crossing to six Whirlpool-family brands with a corrosion-resistant ABS build and a year of cover. If both temperature sides have failed, grab the Semzohc hot-and-cold pair so the second failure doesn’t mean a second teardown. And for a factory-authentic part with the shortest install, the Whirlpool W11165546 is the one to reach for.
One thing worth knowing before you buy: the single most important number isn’t on any of these spec sheets — it’s your washer’s full model string. Match that, match the connection style, and the repair becomes a screwdriver job that gets the laundry running again.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





