A single-handle faucet suits most US bathrooms because it fits tight vanities, installs with fewer connections, and works one-handed; double-handle models win when precise hot-cold control or a traditional look matters more.
One hand, one motion, and the water is at the temperature you want — that’s the case for a single-handle faucet, especially in a small bathroom where the vanity has room for little else. A double-handle setup asks for two adjustments and usually two hands, but gives you independent hot and cold valves and symmetry that suits a wide, traditional counter. Four things decide the fit: hole pattern, space, how you use the water, and who shares the bathroom.
How Do The Two Handle Styles Actually Differ?
A single-handle faucet mixes hot and cold inside one cartridge, so one lever sets both flow and temperature; a double-handle faucet splits that job across two separately adjusted valves. That mechanical difference drives installation, maintenance, and daily feel.
- Operation: one control versus two; the single handle is easier for kids, guests, and anyone with limited grip strength.
- Temperature precision: two valves dial hot and cold separately, which some prefer for washing or shaving.
- Installation: single-handle models are usually simpler and need less space behind the sink.
- Maintenance: a single-handle repair centers on one mixing cartridge; double-handle models use separate valves that can often be serviced individually.
What Fits Your Sink And Countertop?
Check the hole pattern first — single-hole, 4-inch centerset, and 8-inch widespread faucets are not automatically interchangeable, and buying the wrong configuration is the most common and most expensive mistake here.
A single-handle faucet commonly mounts through one hole; some models include a deck plate to cover extra holes. Double-handle faucets typically come as a 4-inch centerset (all parts on one base) or an 8-inch widespread, where spout and two handles mount separately. On widespread models, confirm the actual adjustable spread in the manufacturer’s installation instructions — “8-inch” describes the common configuration, not a fixed number.
Also verify what ships in the box. Listings vary: the MOEN Genta widespread model identifies a drain kit and valve as included, while other faucets may need a drain, supply lines, or a rough-in valve bought separately. Skipping that check turns a $129 faucet into a bigger project.
Which Style Costs More And Performs Better?
Price tracks brand, finish, and included parts, not handle count, so compare total cost rather than sticker price. Current retailer listings show widespread double-handle models from about $129 to $365, and single-handle models in a similar spread.
| Model | Style | Listed Price |
|---|---|---|
| KOHLER Sundae 8-inch widespread (K-R28797-4D-BN) | Double handle | $129.00 |
| MOEN Banbury 8-inch widespread | Double handle | $129.00 (valve included) |
| KOHLER Cursiva 8-inch widespread (K-R30579-4D-2MB) | Double handle | $169.00 |
| American Standard Belmeade 8-inch widespread | Double handle | $180.70 |
| American Standard Townsend 8-inch widespread | Double handle | $183.95 (1.2 gpm) |
| Delta Chamberlain Gold 8-inch widespread (35747LF-CZ) | Double handle | $189.00 |
| MOEN Genta 8-inch widespread (84763BL) | Double handle | $199.00 (drain kit and valve) |
| Moen Iver single-handle (6805) | Single handle | $306.60 |
Water performance is a separate axis. Federal standards cap bathroom faucets at 2.5 gpm, and many current models run lower — the American Standard Townsend is listed at 1.2 gpm, plenty for handwashing and shaving. If your area sets stricter limits, match the faucet’s certified flow rate to local rules before buying. For a wider look at mounting styles, this roundup of bathroom faucet types breaks down the configurations side by side.
Check accessibility too. Single-handle controls are generally easier to operate without tight grasping or twisting, but don’t assume every single-handle model carries an ADA claim — verify the specific model. Consumer Reports’ faucet buying guidance also stresses matching finish and features to how the room is actually used, not to a showroom display.
Which One Should You Buy?
Pick the single handle for a small or modern vanity, a rental, or any bathroom where one-handed operation helps. Pick the double handle for a large counter, a traditional or symmetrical design, or a household that wants separate hot and cold control.
- Small vanity or powder room: single handle — less hardware, easier install.
- Wide, traditional counter: double handle in an 8-inch widespread for visual balance.
- Kids or limited grip strength: single handle, after confirming the ADA claim.
- Precise temperature control: double handle with independent valves.
Whichever you choose, shut off both supplies first, use the manufacturer’s own installation steps rather than a generic sequence, and check for leaks at every connection before calling the job done — the included documentation is the authority on tools and sealant.
Common Questions
Can I Put A Double-Handle Faucet On A Single-Hole Sink?
Not directly. A double-handle faucet needs two or three mounting holes, while a single-hole sink has one. A deck plate can sometimes cover unused holes on a multi-hole sink for a single-handle faucet, but the reverse doesn’t work — a two-handle faucet can’t be squeezed into a single-hole opening without drilling or a different top.
Are Single-Handle Faucets More Expensive?
No consistent pattern exists. Retailer listings put widespread double-handle models from about $129 to $365, and single-handle models span a similar range — the Moen Iver single-handle is listed at $306.60 while many double-handle models sit near $129 to $199. Price follows brand, finish, and included parts, not handle count.
Which Style Is Easier To Repair?
Single-handle repairs usually involve one mixing cartridge, which can mean a single part to source. Double-handle models use separate hot and cold valves that can often be serviced or replaced on their own. Either way, get the model-specific part number from the manufacturer rather than guessing at a universal cartridge.
Sources
- Consumer Reports. “Faucets Buying Guide” Covers faucet selection factors including finish, features, and fit.
- American Standard. “Bathroom Faucets” Source of Townsend and Belmeade listed prices and the Townsend 1.2 gpm flow rate.
- Moen. “Bathroom Sink Faucets” Source of Iver single-handle and two-handle listed prices.