Structured Media Enclosure Buying Guide: What to Look For | Sizing Rules

A structured media enclosure is sized by cable count, module capacity, and depth — not height alone, so plan the router, switch, and power supply before buying.

Wall height tells you almost nothing about what a structured media enclosure can actually hold. Two boxes of the same size accept very different loads depending on module mounting patterns and interior depth. The buying mistake that costs the most: choosing a 14-inch class box for a house that will run eight Ethernet drops, a coax splitter, and a switch. The result is a cabinet with cable bundles crushed against the cover and no room for the router.

Here is how to size, mount, and specify the box once, correctly.

How Do You Size A Structured Media Enclosure?

Size by connection count and installed-module capacity, then add 30–50% headroom for slack and future drops. Height class is a rough starting point only.

  • 14-inch class: small condos and studios with few connection points. A Leviton 14-inch specification lists a maximum of two full-sized distribution panels at 14.0 × 14.38 × 3.63 inches.
  • 21-inch class: mid-size homes. Leviton’s 47605-21E supports voice, data, video, audio, security, and IT/AV control, accepts power modules through a bottom cutout, and adjusts for 1/2-inch, 5/8-inch, and 3/4-inch drywall.
  • 28-inch class: more modules and more cable slack. Capacity depends on the enclosure and modules chosen.
  • 42-inch class: large, high-demand homes. Leviton’s 47605-42W measures 42 × 14.38 × 3.60 inches, takes full- and half-width expansion modules, and ships with six 3-inch square self-healing foam grommets plus multiple top and bottom knockouts, including two 2-inch top knockouts.

Homes running multi-room audio, security, and video distribution across many rooms often need a 42-inch enclosure or several smaller ones. Never assume enclosure height translates to rack space or equipment capacity — interior depth is what decides whether a switch fits with the cover on.

Reserve room for service loops, cable bend radius, and heat-producing gear. If you want a shortcut past the spec sheets, this tested roundup of the best structured media enclosure options covers real-world fits.

Sizing Class Typical Use Key Spec To Verify
14-inch Condo or studio, few connections Max two full-size distribution panels
21-inch Mid-size home, mixed voice/data/video Bottom power-module cutout; drywall depth slots
28-inch More modules, extra cable slack Interior depth and module count
42-inch Large home, audio and security distribution 3.60-inch depth; full- and half-width modules
Multiple boxes Very large or multi-zone homes Split by zone to shorten cable runs
Surface mount Retrofit on finished walls Rear conduit clearance, screw count
Recessed New construction between studs 16-inch stud centers, flush depth

What Should You Check Before Buying?

Confirm four things: mounting pattern compatibility, what is included in the box, steel gauge, and whether the location needs wireless signal to pass through.

Module compatibility comes first. A box only works if its mounting pattern accepts your manufacturer’s modules — patch panels, splitters, and power supplies from different brands often do not interchange. Leviton’s 14-inch steel specification calls for a 20-gauge white powder-coated steel enclosure with an 18-gauge steel cover; Leviton’s 47605-42W is white steel rated for flush or surface mounting between studs on 16-inch centers.

Check the box contents carefully. Leviton’s 47605-14E is listed as an enclosure without a cover — a detail buyers miss until installation day. Confirm whether a cover, trim, mounting hardware, power module, patch panel, and coax splitter are included or sold separately.

Material matters for wireless. Metal enclosures attenuate Wi-Fi, so do not place the primary wireless access point inside a steel box. Use a wired access point outside the enclosure instead. Plastic enclosures pass signal better but must still provide structural support, ventilation, and module compatibility. Verify the exact listing for your model against ANSI/UL 1863 or ANSI/TIA-568 rather than generalizing across a product family.

How Should You Mount It?

Choose an accessible, well-lit interior wall away from humidity and high-voltage lines. For new construction, set the enclosure level between studs, flush with the stud fronts, and drive at least two screws on each side into the stud sides.

For finished walls, trace the enclosure outline, cut the opening, recess the box flush with the drywall, level it, and fasten it to the studs. For surface mounting, leave rear conduit entries clear and follow the manufacturer’s specified screw count — a minimum of four screws for 14- and 20-inch enclosures and six screws for 28- and 40-inch units per SnapAV’s enclosure manual.

Inside the box, maintain cable bend radius and never kink or crush twisted-pair cable. Separate low-voltage cabling from line-voltage conductors, use listed power accessories, and keep the enclosure out of fire-rated wall assemblies unless the products preserve the assembly’s rating. Any AC receptacle or power-module work falls under the National Electrical Code and local rules, and often needs a qualified electrician. Leviton’s 21-inch enclosure accepts conduit up to 2 inches through its knockouts, with self-healing foam grommets protecting cable bundles and limiting dust entry.

The Leviton structured media enclosure specification sheet is the reference to match against your chosen model before ordering.

Which Enclosure Size Fits Your Home?

Match the class to your drop count and gear list, then move up one size if your total lands near the top of a bracket.

Homes adding whole-house audio or a media server should plan on a 42-inch enclosure plus a second box for a separate zone — shorter runs and less congestion beat one overstuffed cabinet every time.

Buy once, sized for the finished house, not the wiring you have today.

Scroll to Top