Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Here is the short answer: the WEWE High-Arc Pull-Down is the one to buy for most kitchens. It is listed to cUPC, NSF 61 and CEC, it runs at 1.8 gallons per minute, and it installs through a single hole or a three-hole deck with the plate included. If your sink is drilled for two holes, or you want a hands-free sensor, the guide below has a pick for you.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
A faucet that is not listed to the plumbing code can fail an inspection or a home sale, so certification paperwork matters as much as the finish. Every pick below states its own cUPC or UPC status plainly, which makes this upc kitchen faucet comparison easy to check against your own sink setup before you buy.
Top Picks



How To Choose The Best UPC Kitchen Faucet
Buying a faucet is really three decisions stacked together: does it fit the holes you already have, is it legally listed for a potable water supply, and does the spray head reach where you cook. Get the first two wrong and the third never matters.
Check the certification wording, not the word “certified”
UPC stands for the Uniform Plumbing Code, the rulebook many local inspectors work from. A faucet is “listed” to it by a recognized body — cUPC is the Canadian-and-US mark you will see printed on the spec sheet. Ask for the exact listing name (cUPC, UPC/NSF61 by IAPMO, NSF/ANSI/CAN 61) because “lead-free” alone is a material claim, not a certification. If your home has a permit inspection or a future sale in its future, the listing paper is the thing a plumber will ask you for.
Count the holes in your sink deck before anything else
A one-hole faucet drops into a single drilled opening; a deck plate widens it to cover three. A two-hole sink usually means a separate side handle or a side spray, and a four-hole sink adds a sprayer to that pair. Measure the spacing between your existing holes, not just the count, because a fixed centerset spacing will not stretch to fit a wider drill pattern. That mismatch is the number one reason a faucet goes back in the box.
Match the flow rate to how you actually use the sink
Flow rate is measured in gallons per minute (GPM) — how much water leaves the spout each minute the handle is open. Most picks here sit at 1.8 GPM, which fills a stock pot briskly without turning the basin into a splash zone. One pick in this list runs at 1.2 GPM at 60 psi, which is gentler and more water-thrifty but slower on big pots. Neither is wrong; they suit different kitchens.
Look at hose reach and spray modes together
The pull-down hose length decides how far the spray head travels from the spout. A 20-inch hose covers a deep farmhouse basin; a 12-inch hose is fine for a standard sink but feels short over a wide one. Spray mode count tells you how many patterns the head cycles through — stream for filling, spray for rinsing, and on some models a pause or a wide sweep. Three modes is the useful baseline.
Side-by-Side Comparison
| Model | Best For | Hole Count | Flow Rate | Hose Length | Amazon |
|---|---|---|---|---|---|
| WEWE High-Arc Pull-Down★ Best Overall | Most kitchens, one or three holes | 1 hole | 1.8 gpm | 20 inches | Amazon |
| APPASO Black 2 HoleTwo-Hole Fit | Two-hole sinks with a side handle | 2 holes | 1.8 gpm | — | Amazon |
| VXV Pull Down SprayerSmall Space Pick | RV, bar and laundry sinks | 1 or 3 holes | 1.8 gpm | 18 inches | Amazon |
| FORIOUS Vintage Pull Down | Vintage kitchens that want bronze | 1 hole | 1.8 gpm | 12 inches | Amazon |
| Favorpo Wall Mount Commercial | Commercial and utility sinks | Wall mount, 8″ adjustable center | 1.8 gpm | — | Amazon |
| APPASO Touchless Brushed Nickel | Hands-free washing | 1 hole | 1.8 gpm | — | Amazon |
| Lavatrum Tall Pull Down | Oversized pots and tall basins | 1 hole | 1.8 gpm | 31.5 inches | Amazon |
| Derengge Brushed Gold Side Spray | Two or four-hole decks, gold finish | 2 holes | 1.2 gpm | 25 inches | Amazon |
Detailed Reviews
1. WEWE High-Arc Pull-Down Kitchen Faucet
Our pick — 4.5+★ from 45,000+ verified ratings; the strongest balance of quality and price.
The everyday default: cUPC-listed, a 20-inch pull-down hose, and a 15-minute install.
Start with the paperwork, because that is what separates this pick from the crowd. WEWE carries CEC Certified, NSF 61 Certified and cUPC — three separate listings that cover water safety, efficiency and the plumbing code itself. The body is 0.06 in 304 stainless steel with a SU304 stainless handle, so the metal you touch is the same grade as the metal that carries the water. For a faucet at the entry end of the mid-range, that is a lot of certificate for the money.
The 20-inch pull-down hose is the longest reach among the mid-price picks here — the FORIOUS Vintage runs a 12-inch hose, so this WEWE travels 8 extra inches across a deep farmhouse basin. The 360-degree swivel spout and a gravity ball that retracts the spray head back to the spout mean you are not fishing for the head after every rinse. Three settings — stream, spray and pause — cover filling a pot, rinsing a plate and stopping the splash mid-task without twisting the handle.
The recurring question buyers raise is about the finish rather than the function. Brushed nickel wipes clean with a cloth, and the brushed treatment keeps water spots from settling in. The 304 stainless body and ceramic cartridge give it the heft of a faucet priced a tier above. The 1.8 GPM flow rate is CEC-compliant, which means it is capped low enough for efficiency rules but still strong enough for dish duty. Watch one thing: the box does not include the 1/2 male and 1/2 female adapters, so check your existing supply fittings before the install day.
Why it earns the top slot
- Three listings at once: cUPC, NSF 61 and CEC Certified
- 20-inch pull-down hose — the longest reach of the mid-price options here
- 15-minute DIY install with preinstalled supply lines
- Gravity ball retraction keeps the sprayer head parked after each use
Before you commit
- Supply adapters are not in the box — verify your fittings first
- Single-hole body; a three-hole sink needs the included deck plate
Reach for this if: you want a certified pull-down that fits a standard single or three-hole sink and installs without a plumber.
Think twice if: your sink is drilled for two holes — you need the APPASO Black below instead.
2. APPASO Black 2 Hole Kitchen Faucet
Built for the sink that already has two holes and a stubborn side-handle habit.
The number that decides this one is simple: two holes. Where the WEWE above needs one hole (or three with a plate), this APPASO is a two-piece faucet with a separate side handle that lands in its own drilled opening. If your deck came predrilled for a side-lever setup, this is the shape you need, and forcing a single-hole faucet into that deck means an ugly blanking plate or a drill you did not want.
Under it, the body is S304 stainless steel and brass with a lead-free waterway and a PEX hose, and the spec sheet calls out cUPC listing plus a lead-free certificate. The anti-leaking ceramic cartridge keeps drips out of the picture, and the ABS nozzle on the spray head is soft enough that water leaves it without a hard splash.
Where this one asks for patience is the water itself. Buyers flag occasional leakage as a mixed note, so torque the connections properly and check them on day one rather than week six. Two spray modes — not three — mean stream and spray only, with no pause button for stopping the water mid-rinse. The side handle moves water temperature control off the spout, which some cooks love and others find they reach for the wrong lever at first. Give it a week and the hand learns the pattern.
What buyers key on: the solid weight and the look — the matte black reads like a much pricier fixture on a white farmhouse sink.
The honest catch: leakage shows up as a mixed theme, so this pick rewards a careful install more than most.
Best for the two-hole deck: a separate side handle, matte black finish, and a cUPC-listed lead-free body.
Not the one for: anyone who wants a one-lever, one-hole layout or a three-mode sprayer.
3. VXV Kitchen Faucets Pull Down Sprayer
A three-mode pull-down that fits a utility sink as happily as a main kitchen.
Not every faucet lives over a farmhouse sink. This VXV is aimed at the second-tier spots — an RV galley, a camper, a laundry basin, a bar sink — and it ships with a 10-inch deck plate that covers one-hole and three-hole installs at once. The measurement that matters here is the counter: it fits decks up to 1.38 inches thick, which covers most laminate and solid-surface counters but is worth a ruler check before ordering.
The waterway is SUS304 stainless steel with food-grade PEX tubing, and the sheet names cUPC plus NSF/ANSI/CAN 61 — the same water-safety family the other picks carry. Three spray modes (aerated stream, spray, and a sweep mode for washing across the basin) give you more flexibility than the APPASO’s two. The 360-degree swivel spout and a 10-inch pull-down reach let you push the head across the sink without dragging the whole faucet body.
The RV question comes up repeatedly, and the answer is honest: compatibility reads mixed, with several owners saying it is not the best match for RV and travel-trailer setups. That is a fit note, not a build problem — check your rig’s clearance and supply layout. Durability also draws a mixed note, so treat this as the pick for a lighter-duty sink rather than a stockpot-on-every-night workhorse. Set it up with basic tools in about 15 to 20 minutes and you are done.
The read: a certified three-mode pull-down that goes where a full-size kitchen faucet will not, and the brushed nickel resists fingerprints and spots.
Where it fits best: a laundry, bar or secondary sink — not a travel trailer unless you have checked the clearance.
Pick it when: you need a certified faucet for a bar, laundry, or camper sink and want three spray modes.
Pass when: the deck is thicker than 1.38 inches or you need a heavy-duty primary kitchen install.
4. FORIOUS Vintage Kitchen Faucets
The one that brings antique charm to a modern basin — bronze, high-arc, and certified.
If your kitchen has already committed to oil rubbed bronze hardware, the finish is the whole argument. This FORIOUS is a vintage-style high-arc body in a dark oil-rubbed tone, and it carries three listings on the spec sheet — a lead-free certificate, NSF/ANSI/CAN 61, and cUPC. The 360-degree rotating spray head and single handle keep the operation modern even though the look is period. Check the dimensions against your sink before you order; FORIOUS puts that caution right in its own spec copy.
This faucet trades hose reach for looks. Its 12-inch hose is the shortest pull-down among the mid-range picks here — the WEWE above runs 20 inches, so you get 8 fewer inches of travel across a wide basin. Over a standard-depth sink that is plenty. Over a deep farmhouse bowl, you will feel the limit. Three spray modes still cover scrubbing vegetables, rinsing plates and everyday cleanup.
The reputation here is built on how it reads in a room. The oil rubbed bronze finish and metal body read like a fixture priced several tiers higher. The honest caveat is leakage, a mixed theme on this model: some buyers report a perfect seal, others a slight leak, so do the install carefully and check the connections early. Stainless steel and metal construction with multiple wear-resistant treatments are meant to hold the appearance up in a steamy kitchen, and the oil rubbed finish hides water spots better than a bright chrome ever would.
What it brings to a vintage kitchen
- Oil rubbed bronze finish with stainless steel and metal body
- Listed to cUPC and NSF/ANSI/CAN 61 with a lead-free certificate
- 360° rotating pull-down head and three spray modes
- Single-hole install with deck plate and hardware in the box
Where it asks for care
- 12-inch hose is the shortest reach among the mid-range picks here
- Leakage is a mixed note — check connections at install
Made for: a bronze-and-vintage kitchen where the finish is as important as the flow.
Not for: a wide farmhouse sink where you want the spray head to travel a long way.
5. Favorpo Wall Mount Commercial Sink Kitchen Faucet
The wall-mount workhorse for a three-compartment sink that will not line up.
The adjustability is the feature. This faucet’s centers flex anywhere from 7.75 to 8.25 inches, which means a washing sink with a sloppy drill pattern still gets a faucet — a fixed-center wall faucet would just not line up. That half-inch of play is the whole reason this one exists, and it is why restaurant and two- or three-compartment sinks are the natural home.
The body is heavy-duty lead-free solid brass with a brass compressed cartridge, and the listings read CUPC, NSF 372 and lead-free. The 360-degree rotating spout gets the water into every corner of a wide wash bay. The finish is polished chrome and wipes clean with a cloth, which is what a high-frequency setting needs. For setup, an included kit ships a 1/2 NPSM male outlet and a 1/2 NPT male inlet with female adjustable connectors, so it adapts to a range of wall plumbing and pipe spacing without a special order.
Buyers push back on leakage. Dripping is the mixed note on this model — some report a tight seal, others a drip — and durability draws a mixed score too, so inspect the connections carefully and expect to check the cartridge after the first season. That is the trade for a faucet that can be adapted to a wonky wall rather than rejected by it. This is a wall-mounted commercial faucet; it is not the pick for a standard under-counter deck in a home kitchen.
The case for it: branded workhorse hardware with an adjustable center, a solid brass body and a 360° spout for a shop sink.
Who should skip: a home kitchen with a deck mount — this installs on the wall, not under the sink.
Right choice for: commercial, laundry, garage, or garden sinks where the hole spacing is off.
Wrong choice for: a deck-mounted home kitchen, where a pull-down makes far more sense.
6. APPASO Touchless Brushed Nickel Kitchen Faucet
Wave your hand, get water — and the tap never sees a raw-chicken finger again.
For anyone who cooks with poultry or handles dough, the sensor is the entire value of this faucet. A hand wave near the head starts the flow with no contact, and the faucet shuts itself off after 3 minutes to prevent waste. That matters when you step away mid-rinse with a pot still in the sink. It runs on four AA batteries — not included — so plan the battery box location before the install.
The sprayer is a 3-in-1 head: a powerful spray for cleaning, a steady stream for filling pots, and a double-broom mode for hard residue. The hose extends to reach the corners of a standard sink. Under the finish sits a 7-layer PVD coating (a durable vapor-deposited finish) built to resist rust, corrosion, stains and fingerprints, and a ceramic cartridge the maker says is tested through 550,000+ cycles. The 1.8 GPM aerator keeps the flow in line with the water-saving family the other picks share.
The install runs 15 to 30 minutes for a single or three-hole sink with the included deck plate, and the box carries the 70cm hot-and-cold hose plus the battery box. The thing to know is the battery: touchless means you are maintaining a power source, so a dead set of AAs turns a hands-free faucet into a manual one until you swap them. The 7-layer PVD brushed-nickel finish and the motion sensor both read more expensive than the tier. If you want zero battery maintenance, a plain lever faucet like the WEWE above is the simpler answer.
Why hands-free earns its place
- Motion sensor starts water with a wave and auto-shuts off after 3 minutes
- 3-in-1 sprayer: powerful spray, steady stream, double-broom mode
- 7-layer PVD finish resists rust, corrosion, stains and fingerprints
- 15 to 30-minute install for single or three-hole sinks
The catch worth knowing
- Runs on 4 AA batteries that are not included — hands-free stops when they drain
- Sensor handle is center-mounted, so the layout is fixed
Great fit: a busy kitchen where hands are messy and you want water without touching metal.
Less ideal: a household that would rather not think about batteries inside the sink cabinet.
7. Lavatrum Kitchen Sink Faucet, Brushed Nickel, Tall Pull Down
Nineteen inches of clearance for the stockpot you keep putting off washing.
Height is the reason to look here. At 19 inches and a 9.8-inch reach spout, this Lavatrum clears oversized pots and tall pitchers without stooping, which is the daily problem in a kitchen with a big canning pot or a deep roasting tray. The pull-out sprayer pivots and retracts on an easy-return hose and swivel adapter, so the head comes back without a shove.
The specs back the height with a solid core: a 100% lead-free solid brass main body, cUPC-certified SUS304 stainless steel, and food-grade PEX inner hoses for a lead-free supply. The 1.8 GPM flow rate is the same standard as the rest of the list. The maker rates the handle at 500,000 switches, marketed as up to 10 years of service. All-metal fittings and preinstalled supply lines eliminate a potential leak point and speed the install for one or three-hole sinks.
Three spray modes cover stream, a powerful spray, and a pause you hold to kill the water mid-task. The honest downside on this model is leakage — owners mention dripping from the top, so check the collar and connections early rather than after a puddle forms. Value is also a mixed note, which is expected from a taller, heavier fixture. Buy it for the height and the brass body, not because it is the cheapest tall unit you will find.
The standout: a 19-inch arc and a 9.8-inch reach that no other faucet in this guide offers.
The daily caution: leakage from the top is a recurring theme — inspect the collar at install.
Choose it if: your sink is deep and your cookware is tall and you want the extra clearance.
Overkill if: you have a shallow standard sink — the extra height buys you nothing there.
8. Derengge Brushed Gold Single Handle Kitchen Faucet
Brushed gold, a separate side spray, and UPC paperwork from IAPMO — a rare combo.
Two holes or four, this Derengge covers both — a deck plate and a side spray in the box let you go two-hole with the plate or four-hole with the sprayer on its own opening. That flexibility is the reason it earns a slot even at the top of the price range. The paperwork is the strongest in this group: certified to UPC, NSF61 and Lead Free by IAPMO, the listing body that issues those marks. For a remodel that has to pass an inspection, that is the exact sentence a plumber wants to see.
The brushed gold finish holds up against rust, abrasion and water spots — a warmer look than chrome and less smudge-prone than a polished gold. The waterway is lead-free with a drip-free ceramic cartridge and a metal lever, and the high-performance aerator is rated 1.2 GPM at 60 psi, the gentlest flow in this guide. That means the slowest fill on a stock pot but the least splashing and the most water-thrifty operation. The 25-inch hose runs the side spray across a wide sink and back.
The honest note is longevity. Durability draws a down note from owners who describe it as short-lived, so treat this as the pick for a look-forward kitchen rather than a forever fixture. The trade is real — you are paying for the gold finish, the two-or-four-hole flexibility, and the IAPMO listing, not for the longest service record. If you want a faucet you can install and forget for a decade, the WEWE above is the safer bet. If you want the gold accent to anchor the sink, this is the rare certified one that delivers it.
The gold-finish case
- Certified to UPC, NSF61 and Lead Free by IAPMO
- Fits 2 or 4-hole sinks with the included side spray and deck plate
- 25-inch side-spray hose reaches a wide basin
- Drip-free ceramic cartridge with a metal lever handle
Weigh before buying
- 1.2 GPM at 60 psi is the slowest fill rate in this guide
- Durability draws a down note — this is a looks-first faucet
Best for: a gold-accent remodel that needs an inspection-ready IAPMO listing and a side spray.
Look elsewhere if: you want a decade of trouble-free service before the next swap.
Know the Specs
cUPC, UPC and NSF — the listing labels
UPC is the Uniform Plumbing Code, the rulebook inspectors work from. cUPC is the mark a faucet carries when it has been listed to that code for both US and Canadian use, and it is usually paired with an NSF/ANSI 61 or NSF 61 listing for the water-contact materials. “Lead-free” alone is a material statement, not a listing — a faucet can be built from lead-free brass and still be uncertified. If a permit, a rental inspection, or a resale is on your horizon, confirm the exact listing name on the spec sheet, not just the word “certified.”
Hole count and deck plates
Your sink deck was drilled at the factory, so hole count rules everything. One hole means a single-lever faucet, and a deck plate lets that same faucet cover a three-hole drill at a standard spacing. Two holes usually means a separate side handle or side spray, and four holes adds a sprayer to that pair. Measure the distance between the holes as well as the count — a fixed centerset pattern will not stretch to reach a wider drill. Getting this right is the difference between a 15-minute install and a return trip.
Flow rate in GPM
Gallons per minute (GPM) is how much water leaves the spout each minute the handle is open. Most picks here run at 1.8 GPM, a rate that fills a pot briskly without splashing the counter. A lower rate like 1.2 GPM at 60 psi saves more water and splashes less, but slower fills. Flow rate does not change whether the faucet is certified — it is a separate spec — but it does decide how the sink feels day to day, so match it to how you cook.
Spray modes and pull-down hose length
A pull-down head swivels and extends on a hose, and the hose length is the reach. Longer hoses (20 to 31.5 inches in this guide) suit deep or wide basins; shorter ones (12 to 18 inches) are fine on a standard single bowl but fall short in a farmhouse sink. Spray mode count is the second half of the story — three modes usually means stream, spray and a pause or sweep. Two modes means stream and spray only, so there is no way to stop the water mid-rinse without the handle.
Common Questions
What does cUPC certified actually mean on a kitchen faucet?
Will a one-hole faucet fit a three-hole sink?
Is a 1.8 GPM faucet strong enough to rinse dishes?
Can I replace a kitchen faucet myself without a plumber?
How long should a kitchen faucet last?
Do touchless kitchen faucets need batteries?
What is the difference between a pull-down and a pull-out faucet?
How do I check the hole spacing on my sink before buying?
Is a lead-free brass faucet the same as a certified one?
The Bottom Line
The honest shortlist depends on fit and paperwork. For most kitchens, the WEWE High-Arc Pull-Down is the faucet to buy — it stacks cUPC, NSF 61 and CEC listings on one body, gives you a 20-inch pull-down hose and a 360° swivel spout, and installs in a claimed 15 minutes without a plumber. It holds the top slot because it stacks three listings on one body at a mid-range price. If your sink is drilled for a separate side handle, the APPASO Black 2 Hole is the one that fits that deck. And if a gold accent is the whole point of the remodel, the Derengge Brushed Gold carries the strongest listing in this guide — UPC, NSF61 and Lead Free by IAPMO — plus a 25-inch side spray to run across a wide basin.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




