The tank model code — an ST or CST number — stamped inside the tank tells you exactly which TOTO parts fit your toilet.
Ordering a fill valve that looks identical and finding it doesn’t fit is a common, expensive mistake. TOTO builds several drain-valve families behind nearly identical tanks, and warns that similar-looking parts may not be interchangeable: buy by complete model and part number, never by eye. Reading the model takes about two minutes with a flashlight.
Where The TOTO Model Number Is Stamped
The code sits inside the tank on the back wall, printed in black ink or on a sticker; on most two-piece toilets it starts with ST or CST. Lift the lid carefully and set it somewhere flat — a dropped lid can chip on tile.
Write down the entire identifier, suffixes and all. Letters after the numbers matter: near-twin tanks use different fill valves, levers, and lids, and TOTO’s manuals treat them as separate assemblies.
- Two-piece toilet: check the inside back wall of the tank for the ST or CST code.
- WASHLET seat: model and serial numbers are usually on a white sticker on the back near the tank, starting with SW or TCF.
- No readable code: photograph the toilet from the front with the lid down and from the side, then send both to TOTO technical support.
The code changes the shopping list. The ST454E tank takes a TSU54A fill valve but shares the THU499S flapper and THU252P-A flush valve with several models. The ST744E runs the same flapper and flush valve but pairs them with a TSU53S fill valve and a different trip lever. One digit apart, two different lists.
Reading The Bowl When The Tank Code Is Gone
The bowl and configuration narrow the model down: note one-piece or two-piece, round or elongated, standard or universal height, and the rough-in from finished wall to closet bolts.
Feature names help too — CEFIONTECT glaze, TORNADO FLUSH, an integrated bidet seat, or WASHLET all appear in TOTO’s model descriptions and parts manuals.
Rough-in is not a rounding error. TOTO’s Soirée manual lists separate UniFit rough-in components for 10-inch (TSU01W.10R), 12-inch (TSU01W.12R), and 14-inch (TSU01W.14R) installations — they do not swap. TOTO’s product FAQ covers model and part lookups.
Matching The Code To The Correct Part
Look the tank model up in TOTO’s Parts Store, the product page, or that model’s parts manual — every replacement part is listed against the exact tank version.
Manuals split drain valves into flapper-type and tower-type, which decides your repair: a flapper system uses a rubber flapper on a valve seat; a tower system uses a taller flush tower with its own seal gasket.
| Tank Model | Flapper Or Drain Valve | Fill Valve |
|---|---|---|
| ST243E | THU499S flapper | TSU53A |
| ST424E | THU499S flapper | TSU53A |
| ST454E | THU499S flapper | TSU54A |
| ST744E | THU499S flapper | TSU53S |
| ST403E | THU443.15K-A drain valve | TSU53A |
| ST454ET | THU445.10F-A drain valve | TSU53A |
| ST454E flush valve | THU252P-A | — |
Trip levers are also listed by model: ST243E and ST454ET use THU068, ST424E a THU141N, ST744E a THU398. To skip the part-number hunting and see what other owners bought, our guide to the best TOTO replacement parts rounds up tested options by repair type.
Lids, Seats, And Discontinued Parts
A replacement tank lid must match the tank model and the color — the lid number is usually stamped inside the back or side of the tank, and the color code is a separate part of the order. A lid for a CST744 tank may not sit flush on another.
If a part is discontinued, TOTO technical support can supply the superseding part number or current kit — faster than hunting online.
WASHLET seats and integrated electronic toilets need model-specific electrical, water-supply, hose, and control components; use your unit’s manual, not a universal kit. Photograph the old part before removing it, and keep the model code written on a note in the bathroom — the next repair takes half the time.
Common Questions
Can I match a TOTO part by holding the old one next to a photo?
Not reliably. TOTO warns that similar-looking parts may not be interchangeable, and its manuals list separate parts for nearly identical models. Confirm the part number against your tank model before buying.
What if the number inside my tank has worn off?
Photograph the toilet from the front with the lid down and from the side, then send both to TOTO technical support. They can identify the model and parts from the photos and your toilet’s features.
Do I need a different fill valve for a tower-style tank?
The fill valve is separate from the drain assembly, so the tank model decides it. Check your model in the parts manual — an ST454E takes a TSU54A fill valve while an ST744E takes a TSU53S.
Sources
- TOTO USA. “Product FAQ” Confirms where model and serial numbers are located, the photo ID option, and the interchangeability warning.
- TOTO USA. “CST603S-608S Parts Manual (PD-01556)” Source of the tank-model-to-part mapping and the flapper versus tower drain-valve split.
- TOTO USA. “Soirée Parts Manual (PD-01522)” Documents the model-family component list and the distinct 10-, 12-, and 14-inch UniFit rough-in sizes.