9 Best Trailer Hitch Insert | Two-Inch Slop, Solved

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

The fastest way to quiet a rattling hitch is a snug insert, not a new bumper. If your ball mount clunks over every driveway seam, the gap between the shank and the receiver tube is the culprit. This guide sorts the weld-in steel, the silencer pads, the reducers, and the extenders so you buy the one part that actually fixes your rig.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see exactly which fitment size each part needs, which ones weld instead of bolt, and where the towing limits land. Everything you need to pick the right Trailer Hitch Insert for your truck is laid out below, from the receiver size down to the pin.

Top Picks

Curt Manufacturing 49090 9 in Receiver Tube 2 in X 2 in Raw Finish
Best OverallCurt Manufacturing 49090 Receiver Tube4.5+★850+ ratingsA bare steel tube you weld in yourself, and the strongest foundation on this list. If you are building a custom bumper or repairing a trailer frame, this is the part the whole towing setup hangs on.Check price on Amazon
MaxxHaul 50833 2 x 2 inch Trailer Hitch Receiver Extender 7 inch Hitch Extension Length 3500 Lbs GTW
Clearance KingMaxxHaul 50833 Hitch Receiver Extender4.5+★750+ ratingsSeven extra inches of reach to clear a spare tire, a bumper, or a tight bike rack. When your accessory sits too close to the tailgate, everything gets awkward.Check price on Amazon
Trailer Hitch Ball Mount 2' Drop Fits 2' Receiver, 6000Lbs GTW
Most CapableTrailer Hitch Ball Mount 2″ Drop4.5+★700+ ratingsThe one part here that actually couples a trailer, rated higher than any extender above. Most inserts on this list are helpers; this one is the towing hardware.Check price on Amazon

How To Choose The Best Trailer Hitch Insert

The first decision is not brand or finish — it is the size of the square hole in your bumper. A hitch insert only works if its outer dimensions match your receiver tube, so measure the inside opening before you buy anything. A part that is a quarter inch off will rattle, wobble, or refuse to slide in at all.

Measure your receiver tube first

Most full-size trucks and SUVs use a 2-inch by 2-inch receiver, which is the industry standard most of these inserts are built for. Heavy-duty three-quarter-ton and one-ton trucks often run a larger 2.5-inch receiver, and those need a reducer sleeve to step down to the 2-inch accessories you already own. Smaller vehicles and some crossovers use a 1-1/4-inch receiver, which takes its own dedicated ball mount.

Decide what the insert is actually for

A silencer pad stops noise and vibration between the shank and the tube — it does not add strength. A cover keeps water, dirt, and road salt out of an empty receiver when you are not towing. A weld-on tube is a permanent structural part for a custom bumper or trailer build. An extender pushes your accessory back for clearance, but every inch of extra length changes how the load sits on your hitch.

Check the pin and the rating

Some inserts include a hitch pin and clip, and some need the one you already own. Look at the pin diameter too, since a 5/8-inch pin is the common size for 2-inch receivers but hole sizing can vary between brands. Finally, read the towing rating in GTW (gross trailer weight, the total weight of a loaded trailer) and TW (tongue weight, the downward load on the hitch ball). Never exceed either figure.

Side-by-Side Comparison

Model Best For Receiver Fit Tow Rating Material Amazon
Curt 49090 Weld-On Tube★ Best Overall Custom weld builds 2 in x 2 in — Alloy Steel Amazon
MaxxHaul 50833 ExtenderClearance King Spare-tire clearance 2 in x 2 in 3500 lbs GTW Stainless Steel Amazon
METOWARE Ball MountMost Capable Towing a trailer today 2 in x 2 in 6000 lbs GTW Alloy Steel Amazon
Nilight Hitch Mount 1-1/4 in receivers 1-1/4 in x 1-1/4 in 3500 lbs GTW Alloy Steel Amazon
TOPTOW Extender Bike rack spacing 2 in x 2 in 3500 lbs GTW Alloy Steel Amazon
LFPartS Adapter Sleeve 2.5 in to 2 in step-down 2.5 in to 2 in — Carbon Steel Amazon
CURT 22750 Hitch Cover Empty-receiver protection 2 in x 2 in — Steel Amazon
joytrace Silencer Pads Killing the rattle 2 in (2.1 in inner) — Silicone Rubber Amazon
eVerHITCH Flag Cover Patriotic finishing touch 2 in x 2 in — Aluminum, Rubber Amazon

Detailed Reviews

★ Best Overall

1. Curt Manufacturing 49090 Receiver Tube

Our pick — 4.5+★ from 850+ verified ratings; the strongest balance of quality and price.

1/2-Inch Reinforcement CollarPre-Drilled Pin Hole

A bare steel tube you weld in yourself, and the strongest foundation on this list.

If you are building a custom bumper or repairing a trailer frame, this is the part the whole towing setup hangs on. It is raw, unwelded receiver tubing with industry-standard inside dimensions, so it accepts virtually any 2-inch by 2-inch shank — a ball mount, a tow hook, or another receiver accessory. It is made from alloy steel, and the maker backs it with a limited lifetime warranty that runs one year on the finish and one year on the parts.

The detail that earns it the top spot is the reinforcement collar. A 1/2-inch collar is fitted around the mouth of the tube to add strength right where the load concentrates — the opening. It also arrives pre-drilled, so a trailer hitch pin drops straight in once you have the tube burned into place. There is no drilling, no guesswork on pin alignment.

What wins people over is how much load the alloy steel takes without flexing. Owners haul with it and report the tube takes heavy loads without complaint, and home fabricators prize it for everything from a workshop build to a one-off custom hitch. The thing to know before you buy: raw finish means it needs paint after welding or it will rust, and at 2.21 kg it is a chunk of steel, not a bolt-on piece — compare that to the 0.15 kg American flag cover further down and you see the difference between a structural part and a plug. This is a job for someone with a welder, not a driveway swap.

What the steel buys you

  • Industry-standard 2 in x 2 in inside dimensions accept nearly any shank
  • 1/2-inch reinforcement collar strengthens the load-bearing opening
  • Pre-drilled hole takes a hitch pin with no extra drilling
  • Alloy steel with a limited lifetime warranty

Where it asks more of you

  • Raw finish needs paint after welding to resist rust
  • Requires welding skill — it is not a bolt-on accessory
  • 2.21 kg of steel with no pin or mount included

Built for: Anyone welding a custom receiver into a bumper, trailer, or frame who wants a pre-drilled tube they can trust.

Skip if: You want something that slides in and installs in a minute — this one needs a torch and a steady hand.

Clearance King

2. MaxxHaul 50833 Hitch Receiver Extender

7-Inch Extension3500 lbs GTW / 350 lbs TW

Seven extra inches of reach to clear a spare tire, a bumper, or a tight bike rack.

When your accessory sits too close to the tailgate, everything gets awkward. This extender pushes the hitch point back by 7 inches, which buys you clearance for maneuverability and keeps a rack or carrier off your bumper. It is a 2-inch square tube, so it plugs into the industry-standard receiver most trucks run, and it carries a rating of 3500 lbs GTW (gross trailer weight) and 350 lbs TW (tongue weight) — enough for a small trailer, an ATV hauler, or a cargo carrier.

The included 5/8-inch pin and clips are the quiet hero. A 5/8-inch hitch pin and clips come in the box, so you are not hunting for the right pin on install day. Owners put it to work with ATVs and wagons, and the spare-tire crowd is the happiest — one setup clears the spare on a Jeep CJ7 cleanly, which is exactly the tight fit this length was made for.

Here is the honest part about any extender: adding length adds leverage, and the rating is 3500 lbs GTW, so it is not the tool for a heavy travel trailer. Match it to light loads and it does its job. The 90-day warranty is also shorter than most here, so treat it as a solid working part rather than a lifetime piece.

Reach for this if: Your rack or carrier fouls the spare tire or bumper and you need a clean 7 inches of breathing room.

Look elsewhere if: You are pulling serious trailer weight — the 3500 lbs GTW ceiling says keep it to light-duty towing.

Most Capable

3. Trailer Hitch Ball Mount 2″ Drop

6000 lbs GTW Rating2-Inch Ball Included

The one part here that actually couples a trailer, rated higher than any extender above.

Most inserts on this list are helpers; this one is the towing hardware. It is a 2-inch ball mount with the ball already attached, a 2-inch drop, and a 3/4-inch rise, so you can level out the trailer to your specific vehicle instead of towing nose-up or nose-down. The rating is 6000 lbs GTW and 600 lbs tongue weight — well beyond the 3500 lbs GTW ceiling on the MaxxHaul and TOPTOW extenders, so it is the pick when the trailer gets genuinely heavy.

The build is alloy steel under a black powder coat, with a polished chrome ball that resists rust at the coupling point. It ships with a hitch pin and the ball pre-torqued, so the install is insert, pin, done. What wins people over is how solid it feels bolted up — the trailer rides level and stays put on the road, though the occasional box turns up short a pin, so check the contents on arrival.

The trade-off is simple: this is a mount, not a rattle fix or a spacer. If you only tow occasionally and your hitch already clunks, the joytrace pads below solve that for less hardware. But if you need to pull a loaded utility trailer, this is the piece with the headroom.

Where it pulls ahead: A 6000 lbs GTW and 600 lbs TW rating, a 2-inch drop with 3/4-inch rise for level towing, and a pre-attached chrome ball with pin in the box.

Right choice when: You need a ready-to-couple ball mount with the rating to handle real trailer weight.

Not the one if: Your goal is quieting an existing hitch or adding clearance — that is a pad or an extender job, not a ball mount.

Small Receiver Fit

4. Nilight Trailer Hitch Mount Fits 1-1/4″ Receiver Tubes

1-1/4-Inch ShankE-Coat + Powder Coat Finish

The odd size out — built for the smaller 1-1/4-inch receivers most trucks do not have.

If your vehicle runs a compact 1-1/4-inch receiver instead of the standard 2-inch, none of the big inserts above will fit. This ball mount carries a 1-1/4-inch by 1-1/4-inch shank to slot into that smaller tube, with a 1-1/4-inch drop and 3/4-inch rise to get your trailer level. It is rated at 3500 lbs GTW and 350 lbs TW, which suits a light camper, a motorcycle trailer, or an ATV hauler.

The finish gets two stages — an E-Coat pre-coat (a primer layer that seals the steel) and a textured black powder coat on top — to hold off rust over the seasons. One catch worth stating plainly: the package contains the ball mount only. The tow ball and the hitch pin are sold separately, so budget for those two pieces or dig them out of your parts bin before the trailer shows up.

Owners running this 1-1/4-inch mount report it seats solidly and tows light trailers without complaint. It is a straightforward part that fits the receiver it was built for. Just confirm your receiver is actually 1-1/4 inches first; that measurement is the whole ballgame here.

The fit that matters: A 1-1/4-inch shank, 1-1/4-inch drop, 3/4-inch rise, and a 3500 lbs GTW / 350 lbs TW rating, wearing a two-stage E-Coat and powder coat finish.

Made for: Compact-vehicle owners with a 1-1/4-inch receiver who need a level-towing ball mount.

Buy it only if: Your receiver measures 1-1/4 inches — and remember the ball and pin come separately.

Longest Reach

5. TOPTOW Trailer Hitch Extender 12-inch

12-Inch Extension3500 lbs GTW / 350 lbs TW

Twelve inches of space between your bumper and your bike rack or cargo carrier.

Where the MaxxHaul above gives you 7 inches, this TOPTOW stretches to a 12-inch extension length — noticeably more air between the bumper beam and a hitch-mounted bike rack or cargo tray. It is a 2-inch by 2-inch industry-standard bar, rated to 3500 lbs GTW and 350 lbs TW, and it comes with a 5/8-inch hitch pin and clip so you can mount it the day it lands.

The alloy steel wears a durable black powder coat for corrosion resistance, and it weighs 6.8 pounds — a substantive bar. Owners lean on it for bike racks and for JD Gator vehicles, and the adjustability is a recurring point: the extra length helps clear a trailer or tight accessory. If you need to reach past a deep bumper, this length is the whole reason to pick it.

The real limit is leverage: 12 inches of extension multiplies the load on the receiver. A 12-inch extension hangs your load further from the frame, so the 3500 lbs GTW and 350 lbs TW rating is exactly where it stays — do not push a heavy trailer on this bar. For light racks and carriers, though, the extra room is worth the modest weight.

Pick it for: Bike racks and cargo carriers that need a full foot of clearance from a deep bumper.

Think twice if: You want to tow heavy — the 12-inch length and 3500 lbs GTW rating are built for light accessories.

Big-Truck Adapter

6. 2.5″ to 2″ Trailer Hitch Receiver Adapter Sleeve

2.5-Inch to 2-Inch Step-DownPowder Coated Black

The sleeve that lets heavy-duty trucks run the standard 2-inch accessories they already own.

Three-quarter-ton and one-ton trucks often come with a larger 2.5-inch receiver, which leaves your 2-inch ball mount and racks out in the cold. This carbon steel sleeve slips inside that bigger tube and reduces it down to a 2-inch opening, so your existing hardware works again. It is built specifically for vehicles like the Ford 250/350/450 Super Duty, the Chevy/GMC Sierra 2500HD/3500HD, and the Ram 2500/3500, and it wears a black powder coat.

The fit is what earns it a spot — owners running it on Ford F250s report the sleeve seats cleanly in the 2.5-inch tube and accepts their 2-inch ball mounts and racks. It is a solid chunk of carbon steel at 1.1 pounds, so it does not flex or rattle loose the way thin adapters can.

There is a pin catch you should hear up front: the sleeve takes a 3-1/2 x 5/8-inch hitch pin that is not included, and several buyers found the hole too small for a standard 5/8-inch pin. So check your pin fits before you commit, or plan to source the right one. Get past that and it is a clean, dependable step-down.

Why heavy-duty owners like it

  • Steps a 2.5-inch receiver down to accept 2-inch accessories
  • Solid carbon steel with a powder coat finish
  • Fits specific heavy-duty trucks like the Super Duty and Sierra HD

The pin caveat to know

  • Requires a 3-1/2 x 5/8-inch hitch pin, sold separately
  • The hole can run too small for a standard 5/8-inch pin — verify before buying

Suits you if: Your heavy-duty truck has a 2.5-inch receiver and you want to reuse your 2-inch gear.

Check first if: You already own a 5/8-inch pin you love — confirm it seats in this sleeve’s hole before ordering.

Best Protection

7. CURT 22750 Trailer Hitch Cover

Steel ConstructionBlack Powder Coat

Steel block-off for an empty receiver, so water and road salt stay out.

An open hitch receiver is a bucket for dirt, water, mud, and rust while you are not towing. This cover caps it — a steel plug built to fit a 2-inch by 2-inch receiver tube, sized for most class 3, class 4, and class 5 hitches. The steel wears a durable black powder coat to resist corrosion, and it is a 16-ounce piece, so it has real heft.

Installation uses your existing hitch pin — the pin is not included — and it fits into the receiver then pins in place. Between tows it stows in the glove box, which keeps the look finished and the tube clean. The glossy black powder coat is a recurring bright spot for owners, and the part reads as well-built and heavy-duty in hand.

The one thing to size correctly is the fit. This is a rigid steel plug, and the fit draws mixed feedback — some receivers take it perfectly, while others find it snug or loose depending on the tube. Measure your receiver and you will land in the happy camp. Keep the powder coat touched up and the plug will outlast the receiver.

The case for steel: A 16-ounce steel plug with a black powder coat that blocks dirt, water, and rust from a 2-inch receiver and reuses your own hitch pin.

Good match for: Truck owners who want a rugged, permanent-looking cap on an unused 2-inch receiver.

Different fit if: Your receiver is a nonstandard tube — check the 2-inch measurement so the steel plug seats the way it should.

Best Rattle Fix

8. 6 Pack 2 Inch Hitch Receiver Silencer Pad

Two Thicknesses686 Silicone Rubber

Six silicone pads in two thicknesses to wedge the slop out of a rattling hitch.

That clunk over every bump is the gap between the shank and the receiver tube. These pads slide in to fill it — and the kit gives you options. You get two thin pads at 0.275 inch and four thick pads at 0.55 inch, so you mix and match to close the exact gap your receiver has, even if it is a little worn. A 2.1-inch inner dimension lets them fit most 2-inch hitch balls and receivers from brands like CURT, Reese, and Draw-Tite.

The material is 686 silicone rubber, which the maker says resists oxidation, corrosion, and cracking under sun and rain better than synthetic rubber. In use, they wedge between receiver and hitch to cut the metal-on-metal noise and wear, and most installs slide on with no tools. The bulk of the feedback is that it silences the rattle nicely and the quality is good.

Fair warning: the functionality draws mixed feedback — for plenty it works a treat, but a few find the fit useless if their gap does not match the pad thicknesses. That is why the two-size kit helps; you have more room to find the right combination. If your hitch is a plain standard 2-inch, this is the low-cost way to a quieter ride.

Worth grabbing if: Your 2-inch hitch rattles and you want a tool-free fix with spare pads on hand.

Not a sure thing if: Your receiver gap is unusual — the mixed feedback on fit means the two thicknesses need to line up with your setup.

Best Looking

9. USA American Flag Hitch Cover

Push-In, No Pin NeededRed, Blue & Chrome Faceplate

A flag-faced plug that pushes into a 2-inch receiver in seconds, no pin required.

This is the fun one. It slides into a standard 2-inch by 2-inch receiver and covers the open tube, keeping out water, dirt, mud, and debris while dressing up the back of the truck. The difference from the CURT steel cover above is the install: no hitch pin, no clip, no tools — you align it and push it firmly into place, and friction holds it. At just 0.15 kg it is a lightweight plug, the polar opposite of the 2.21 kg Curt weld tube up top.

The look is the draw. A red, blue, and chrome American flag faceplate gives it a patriotic finish, and it ships with a protective film you peel off after install. It comes from an American-owned, family-operated small business, and it makes an easy gift for a truck owner. Owners love the appearance and the fit on pickup hitches, and it installs in seconds.

Two honest notes. The friction fit is what holds it, and stability draws mixed feedback — a very loose receiver may not grip it as firmly, so check the fit. And the flag color can fade over long sun exposure, so face it away from the worst of the weather if the finish matters to you. Neither is a deal-breaker for a decorative plug.

Why it sells: A push-in rubber plug for a 2-inch receiver with a red, blue, and chrome flag faceplate, no pin or tools needed, and a 0.15 kg build that slides in and out in a second.

Reach for this if: You want an eye-catching, tool-free cap that also keeps debris out of the receiver.

Consider the steel cover if: You need a rigid, pinned-in plug — this one relies on friction, and its color can fade in constant sun.

Know the Specs

Receiver Size: 2-Inch vs 1-1/4-Inch vs 2.5-Inch

The receiver is the square tube on your vehicle that accepts the insert. A 2-inch by 2-inch receiver is the industry standard on most trucks and SUVs, and nearly every insert here is built for it. Compact vehicles sometimes use a 1-1/4-inch receiver, which takes a dedicated ball mount like the Nilight. Heavy-duty trucks often run a larger 2.5-inch receiver, and that needs a reducer sleeve — like the LFPartS — to step down to 2-inch accessories. Match this measurement first, because nothing else works if the tube size is wrong.

GTW and TW: What the Ratings Mean

GTW stands for gross trailer weight — the total weight of a loaded trailer. TW is tongue weight — the downward push the trailer puts on the hitch ball. Every towing part here lists both, and you stay under both numbers. A 3500 lbs GTW / 350 lbs TW extender suits a light trailer or a cargo carrier. A ball mount rated 6000 lbs GTW and 600 lbs TW handles more trailer. And because an extender hangs the load further out, it holds to its lighter rating even if your truck could pull more.

Silencer Pads and Rattle Control

The clunk you hear is slack between the shank and the receiver tube. Silencer pads are rubber or silicone shims that fill that gap. Thickness matters: the joytrace kit offers 0.275-inch thin pads and 0.55-inch thick pads, so you can stack or swap to fit your exact gap. The material counts too — 686 silicone rubber is chosen to resist sun, rain, and cracking. A snug insert quiets the ride and cuts the metal-on-metal wear that grinds down your hardware over time.

Weld-On vs Bolt-On vs Push-In

The Curt 49090 is weld-on raw steel: you burn it into a custom build, then paint it. Covers and ball mounts are bolt-on — they use a hitch pin to lock in place. The eVerHITCH flag cover is push-in, held by friction with no pin. Pick by how permanent you want the part: a weld is structural and permanent, a pin is removable in seconds, and a push-in plug is the least permanent of all. Each one is right for a different job.

Common Questions

How do I know if my truck has a 2-inch or 2.5-inch receiver?
Measure the inside opening of the square receiver tube with a tape measure. If it reads about 2 inches across, it is the standard 2-inch receiver that most inserts here fit. If it reads larger, around 2.5 inches, you likely need a reducer sleeve like the LFPartS to step it down to 2-inch accessories.
Will a 2-inch hitch insert fit my 1-1/4-inch receiver?
No. A 2-inch insert is too large for a 1-1/4-inch receiver. You need a part built for that smaller tube, such as the Nilight ball mount with its 1-1/4-inch shank. Check the size before ordering to avoid a return.
Do silencer pads actually stop the hitch rattle?
They fill the gap between the shank and the receiver tube, which is where the clunk comes from. The joytrace kit gives you two thicknesses — 0.275 inch and 0.55 inch — so you can match your gap. Most users find it quiets the noise, though a few find the fit useless if the pad thickness does not match their setup.
Does a hitch extender reduce how much I can tow?
Yes. An extender adds length, and the load hangs further from your frame, so stay within the extender’s own rating. Both the MaxxHaul 7-inch and TOPTOW 12-inch are rated 3500 lbs GTW and 350 lbs TW. Do not exceed those figures even if your truck could pull more.
What size hitch pin do I need for these inserts?
It depends on the part. The MaxxHaul extender includes a 5/8-inch hitch pin and clip. The TOPTOW includes a 5/8-inch pin as well. The LFPartS sleeve takes a 3-1/2 x 5/8-inch pin that is not included, and its holes can run too small for a standard 5/8-inch pin, so verify before buying. Several covers reuse your existing pin.
Can I leave a hitch cover on while towing a trailer?
No. A cover plugs the receiver for storage, so remove it before inserting a ball mount or accessory. Both the CURT steel cover and the eVerHITCH flag cover block the tube — take them out when you hitch up, and stow the CURT in the glove box or push the flag cover in when done.
Is a weld-on receiver tube stronger than a bolt-on insert?
They serve different purposes. The Curt 49090 is raw alloy steel with a 1/2-inch reinforcement collar, welded permanently into a custom build for structural strength. A bolt-on insert seats with a hitch pin and comes out fast. For a permanent custom hitch or bumper, weld-on is the structural choice. For everyday accessories, a pinned insert is the norm.
Why does my new steel hitch cover fit too tight or too loose?
A rigid steel cover depends on your receiver’s exact inside dimensions. The CURT 22750 is built for a 2-inch by 2-inch tube, and the fit can vary between vehicles — some take it snugly, others find it loose. Measure your receiver first, and the steel plug should seat the way it is meant to.
Will a hitch extender help clear a spare tire on my Jeep?
It can. The MaxxHaul 7-inch extender has been used to clear the spare tire on a Jeep CJ7 by pushing the hitch point out. If your rack or carrier fouls the spare, an extender of the right length — 7 inches or 12 inches — buys the clearance. Keep the tow rating in mind for whatever you hang out there.
Can the American flag hitch cover be used without a hitch pin?
Yes. The eVerHITCH flag cover is a push-in plug, held by friction with no hitch pin, clip, or tools required. You align it with the 2-inch receiver and push it in firmly. Just check that your receiver grips it well, since a very loose tube may not hold it as tightly.

The Bottom Line

For most custom builds and repairs, the winner is the Curt 49090 weld-on receiver tube, because its 1/2-inch reinforcement collar and pre-drilled pin hole make it the structural foundation that holds everything else. If you want to actually tow a loaded trailer with headroom, grab the METOWARE ball mount — 6000 lbs GTW beats the extenders on pure capacity. And to kill a clunk for good, the joytrace silencer pads are the cheap, tool-free fix. One last nudge: if you want the crowd favorite, the Curt tube is the safest call — thousands of owners have already welded it into custom bumpers and trailer frames.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top