9 Best Washer Wall Box with Drain | Silence The Hum

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

Buying a washer wall box with a drain sounds simple until you are standing in a hardware aisle holding a box that fits your pipe type but not your hose thread. The drain port decides whether the box sits recessed behind your machine or bulges out and forces the washer off the wall. This guide covers nine boxes that all include a real drain connection, sorted by what each one actually does well, so you can match one to your pipe system on the first try.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

You will see how crimp, push-fit, and expansion connections differ, why a hammer arrestor changes the noise in a laundry room, and which box fits a standard drywall opening. Every pick below has a dedicated drain port, so the only decision left is which one lines up with your plumbing and your hands. Read on for the best Washer Wall Box with Drain options you can match to your pipe system.

Top Picks

1Pcs EFIELD Washing Machine Box with Center Drain, 1/2' PEX Crimp (WM002)
Best OverallEFIELD Washing Machine Box WM0024.5+★800+ ratingsThe standard crimp-PEX box for most homes, with a pre-installed support bracket already fitted. If your wall already has 1/2 inch PEX stubbed out with a crimp ring, this is the box most people should stop looking after.Check price on Amazon
IPS 89267 WaterTite Standard Dual Drain Washing Machine Outlet Box
Dual Drain PickIPS 89267 WaterTite Dual Drain Outlet Box4.5+★60+ ratingsBuilt to drop into the hole a tired old box already left behind, not to start from scratch. This one leads with a different question than the rest of the list: does it fit the opening you already have?Check price on Amazon
Universal Washing Machine Outlet Box, 1/2-Inch PEX Crimp x 3/4-Inch MHT with Center Drain (SECKWHALE MH-231)
Brass Body PickSECKWHALE MH-231 Washing Machine Outlet Box4.5+★200+ ratingsThe valve bodies are the argument here — solid brass that shrugs off corrosion instead of plastic that ages into it.Check price on Amazon

How To Choose The Best Washer Wall Box with Drain

The drain port is what separates these boxes from plain supply valves, and it is also where most installations go wrong. Get the connection type right, get the rough opening right, and the rest is a forty-minute job. Get either wrong and you are patching drywall.

Match the inlet to the pipe you already have

Your wall already has a pipe type, and the box must accept it. Crimp PEX inlets take a crimping tool and a ring; push-fit inlets take the pipe bare with no tool at all; Pex-A expansion inlets need an expansion tool and only work with PEX-A tubing. A crimp box will not accept expansion pipe and vice versa. This is the single reason a box gets returned.

The drain is where the water actually leaves

A center drain gives you one dedicated port behind the machine, so the washer hose routes straight back into the wall. Some boxes pair a center drain with a side drain, which buys you a second route if your hose is short or your machine is set wide. Either way, confirm the drain port exists before you buy, because a supply-only box leaves you improvising a standpipe.

Rough opening versus faceplate

The rough opening is the hole you cut in the drywall. The faceplate is the trim that covers it. They are never the same number, and a box that lists only the faceplate may not match the hole you already have. The WHK box, for example, specifies an 8.2 inch wide rough opening behind a 10.2 inch faceplate — that gap is the flange that covers the cut.

When a hammer arrestor is worth it

Water hammer is the thud or hum your pipes make when the washer valve snaps shut. A hammer arrestor is a small air chamber that absorbs that shock. If your laundry shares a wall with a bedroom or the noise runs through the whole house, a box with stainless steel arrestors is the quieter long-term choice.

Side-by-Side Comparison

Model Best For Inlet Type Drain Setup Rough Size Amazon
EFIELD WM002★ Best Overall Crimp PEX installs 1/2 inch PEX crimp Center drain 9.25 x 3.5 x 8 in Amazon
IPS 89267 WaterTiteDual Drain Pick Dual drain replacement — Dual drain 8 5/8 x 10 1/4 in (external) Amazon
SECKWHALE MH-231Brass Body Pick Brass valve bodies 1/2 inch PEX crimp Center drain 3.8 x 8 x 9 in Amazon
HeSun WM048-1 Value crimp box 1/2 inch PEX crimp Center drain 3.8 x 10.43 x 3.8 in Amazon
SUNGATOR SG-OBWM12PC-1P Rental and retrofit work 1/2 inch push-fit Center + side drain 9.02 x 3.78 x 8.94 in Amazon
WHK WHK-W01 Quieting a noisy laundry 1/2 inch crimp PEX Center drain 8.2 x 5 x 3 in (rough opening) Amazon
EFIELD WM008 Pex-A expansion systems 1/2 inch Pex-A expansion Center + side drain 8 x 8 x 3.5 in Amazon

Detailed Reviews

★ Best Overall

1. EFIELD Washing Machine Box WM002

Our pick — 4.5+★ from 800+ verified ratings; the strongest balance of quality and price.

1/2″ PEX Crimp InletCenter Drain

The standard crimp-PEX box for most homes, with a pre-installed support bracket already fitted.

If your wall already has 1/2 inch PEX stubbed out with a crimp ring, this is the box most people should stop looking after. It carries a 1/2 inch PEX crimp F1807 inlet feeding a 3/4 inch MHT outlet — F1807 is the standard crimp profile, and MHT is the male hose thread your washer hose screws straight onto. The center drain routes the discharge hose back into the wall behind the machine, so the box sits recessed instead of pushing the washer out.

At 9.25 inch x 3.5 inch x 8 inch it is the smaller-bodied sibling of the WHK and Pex-A boxes in this list, and it ships with a pre-installed support bracket so you are not hunting for a backing plate mid-install. The snap-on frame handles drywall up to 1 inch thick, which covers standard half-inch board with a little margin. Two ports, one hot and one cold, both controlled at the box.

Owners rate it highest for functionality, with build quality and installation close behind. Treat the frame gently while you seat it and that concern never comes up again.

What earns its place

  • Standard 1/2 inch PEX crimp inlet with a 3/4 inch MHT hose outlet — fits the most common laundry rough-in
  • Pre-installed support bracket saves a trip for separate backing hardware
  • Snap-on frame sized for drywall up to 1 inch, so it covers a typical cut cleanly
  • Compact 9.25 x 3.5 x 8 inch body recesses easily behind the machine

Where it asks for care

  • Plastic housing feels lighter than a brass-bodied box
  • Crimp ring and crimping tool are not included, so the tool cost lands on you
  • Center drain only — no side-drain option if your hose run is awkward

Right call for: anyone with a crimp-PEX rough-in who wants the standard box done properly, without paying for features they will not use.

Think twice if: your wall uses a push-fit or Pex-A setup — this inlet will not accept those pipes.

Dual Drain Pick

2. IPS 89267 WaterTite Dual Drain Outlet Box

Dual DrainReplacement Fit

Built to drop into the hole a tired old box already left behind, not to start from scratch.

This one leads with a different question than the rest of the list: does it fit the opening you already have? The IPS 89267 measures 8 5/8 inch tall by 10 1/4 inch wide on the outside, with an internal cavity of 6 1/8 inch tall by 7 1/2 inch wide. That external footprint is the number to check against your existing cut, because the whole point of this box is replacing what was there without opening the wall further.

It carries the WaterTite name and a dual drain arrangement, and the exterior finish is stainless steel with a polished finish. Compare it to the SECKWHALE box at 3.8 inch deep and 8 inch wide and you get the picture straight away — the IPS is a wider, shallower-bodied unit, which is exactly what a replacement application usually needs.

The reputation here is fit and quality in equal measure, which tells you the people buying it are matching it to an existing opening rather than designing a new rough-in from a catalog. Installation effort is not the story; the story is whether your measurement matches theirs. If it does, you are done. If it does not, no amount of clever drain geometry saves the job.

The replacement logic: a wider, shallower box with a polished stainless steel exterior finish, sized to slot into a cut that already exists rather than one you design around it.

Measure first: the 8 5/8 x 10 1/4 inch external size is the whole decision — verify it against your opening before you order.

Reach for this: when you are swapping out a failing box and want to reuse the existing drywall opening without expanding it.

Look elsewhere: if you are cutting fresh drywall and want the standard recessed depth the EFIELD and SUNGATOR boxes deliver.

Brass Body Pick

3. SECKWHALE MH-231 Washing Machine Outlet Box

C46500 Brass ValvesUPC and NSF Compliant

The valve bodies are the argument here — solid brass that shrugs off corrosion instead of plastic that ages into it.

Where most boxes in this group ask you to accept plastic valve bodies, the SECKWHALE runs C46500 brass, a metal chosen for corrosion and abrasion resistance. That matters in a laundry box, because the valves sit full of standing water between wash days. It also means the 1/4-turn hot and cold shut-offs feel mechanical rather than spongy when you actually shut the water off.

The connection is the same workhorse combo as the EFIELD: a 1/2 inch PEX crimp inlet on the F1807 profile feeding a 3/4 inch MHT outlet for your washer hoses. Note the wording carefully — this box is built for the crimp PEX system and is not compatible with the expansion system. A crimping tool is required to finish the job, so budget for that if you do not own one. It carries UPC and NSF compliance, and the recessed body works with a snap-on frame sized for drywall.

Dimensionally it is the narrowest of the mid-range trio at 3.8 inch deep and 8 inch wide — that 8 inch width is noticeably slimmer than the IPS replacement box above, so in a tight stud bay it is the easier fit. Functionality and quality are the two things that carry this box’s reputation, and installation follows close behind; owners get it in and move on.

Why it holds up

  • Lead-free C46500 brass valve bodies resist corrosion and abrasion
  • Meets UPC and NSF requirements for plumbing compliance
  • Recessed design with a drywall snap-on frame and two included support brackets
  • Slim 8 inch width suits a narrow stud bay

The fine print worth reading

  • Crimp-system only — will not work with an expanding fitting system
  • Requires a crimping tool you likely need to buy or borrow
  • Center drain alone, so hose routing options are limited to one path

The brass case: best for a crimp-PEX install where you want metal valves behind the wall and are willing to own the crimp tool.

Not the one for: anyone running Pex-A or push-fit pipe, where this inlet simply will not connect.

Best Value

4. HeSun WM048-1 Washing Machine Outlet Box

Lead-Free BrassInverted Install

The best-reviewed box on this list, and it lets you mount the thing upside down if your studs demand it.

Here is the spec that changes a job: this box supports both traditional and inverted setups. Laundry drain lines do not always line up conveniently, and being able to flip the box lets you meet the drain where it actually falls instead of rerouting pipe. It is built from lead-free brass with high-impact, non-corrosive UPC certified materials, so rust and extreme temperatures are not the concern they are on a plastic-bodied alternative.

The faceplate measures 10.43 inch x 8.27 inch with a 3.8 inch depth, and the package includes the box itself, pre-installed support brackets, and a protective box cover for the finish stage of the job. Inlet is 1/2 inch PEX and the outlet is a 3/4 inch MHT, matching the F1807 crimp family used across this list.

Buyers rate it highest for value, with functionality close behind. The one thing to weigh honestly is the build-quality chatter — most describe it as well-made, and a smaller share feel it could be beefier. That is a spectrum in the housing, not a failure of the valves. For a box that goes behind drywall and stays there, it covers the job.

The value read: a lead-free brass box with an inverted-install option and a protective cover in the box, at entry-level money — the flexibility is what you are actually buying.

One caveat to size: the housing divides opinion between buyers who call it well-made and those who want more heft, so handle it gently while seating the frame.

Pick this one: if your drain layout calls for an inverted mount or you want brass valves without paying a premium-tier price.

Pass if: you want a metal-bodied housing with more mass — this one is brass at the valves, not the whole enclosure.

Tool-Free Pick

5. SUNGATOR Push-Fit Laundry Washer Valve Box (SG-OBWM12PC-1P)

Push-Fit InletCenter and Side Drain

No crimping tool, no soldering torch, no glue — you push the pipe in and it locks.

The push-fit inlet is the whole point. This box accepts 1/2 inch PEX, copper, CPVC, or PE-RT pipe at the inlet and takes 3/4 inch FHT washer hoses at the outlet — FHT meaning female hose thread, the mirror of the male thread on your hose. That pipe flexibility is why it suits anyone working on an older home where the existing material is not PEX at all. The push mechanism eliminates soldering, crimping, gluing, and threading entirely.

Two disconnect clips ship in the box, and you will want them if you ever need to pull the box back off. The drain setup is the more generous one on this list: both a central and a side drain, so you have two routes for the discharge hose instead of one. The recessed design keeps the profile tight to the wall, and the two support brackets bridge the gap between mounting plates. The box and frame separate from each other, which lets you set the layout before you commit.

The shut-off valves are forged from solid brass, and leak-proof performance is a real thread in the feedback — alongside easy installation and solid overall quality. Buyers rate it highest for functionality. An inverted install is possible here too. The trade-off is that push-fit fittings cost more per joint than a crimp ring, and they need a clean, squarely cut pipe end to seal.

Why it wins the retrofit

  • Push-fit inlet accepts PEX, copper, CPVC, or PE-RT — one box covers mixed pipe types
  • No soldering, crimping, gluing, or threading needed
  • Center and side drains give two discharge routes
  • Detachable box and frame plus two support brackets and two disconnect clips included

What to keep in mind

  • Push-fit joints need a clean, square pipe cut to seal properly
  • Works with 3/4 inch FHT hoses — check your hose thread before buying
  • The fitting hardware is the costliest connection method in this group

Best fit for: older homes and retrofits where the pipe type is mixed or unknown, and you would rather not buy a crimp tool for one job.

skip it if: you have a short, perfectly square PEX stub and a crimp tool already on the truck — a crimp box gets there for less.

Most Flexible Drain

6. EFIELD Push-Fit Washing Machine Box WM005

1/2″ Push-Fit InletCUPC and NSF Certified

Aimed at the hum — stainless steel arrestors sit inside the box to take the bang out of every valve snap.

If your current laundry setup announces itself through the whole house, start here. The WHK-W01 installs stainless steel water hammer arrestors inside the box, and the maker says the design reduces the humming noise a portable washer makes while it runs. A water hammer arrestor is a small chamber that absorbs the pressure shock when a valve shuts, which is what turns a thud into nothing.

The valves are lead-free 1/4-turn brass ball valves for hot and cold, and the unit carries CUPC and NSF certification. Inlet is 1/2 inch crimp PEX on the F1807 profile paired with a 3/4 inch MHT outlet. One compatibility note that will save you a return: the F1807 crimp connector fits PEX B pipe and is not meant for PEX A pipe. The center drain handles the discharge, and the recessed design keeps the valves tucked back in the wall.

Measurements are the part people get wrong on this one, because WHK publishes the rough opening rather than just the trim. The hole needs to be 8.2 inch wide x 5 inch high x 3 inch deep, and the faceplate that covers it is 10.2 inch wide x 7 inch high. Cut to the rough-opening figure and the trim does its job; cut to the faceplate and you will be patching.

What it brings to a quiet laundry

  • Stainless steel water hammer arrestors built into the box to absorb valve shock
  • Lead-free 1/4-turn brass ball valves on both hot and cold
  • CUPC and NSF certified construction
  • Center drain with a recessed layout that sits back in the wall

Details to verify before cutting

  • F1807 crimp connector is for PEX B only — not PEX A
  • Rough opening is 8.2 x 5 x 3 inch, which you must cut exactly
  • Fits the crimp system only, so push-fit and expansion pipe are out

Worth it for: a laundry that shares a wall with a living space, or any PEX B crimp install where pipe noise has become a household topic.

Not your box if: you are running PEX A — this connector is explicitly not meant for it.

Pex-A Specialist

7. EFIELD Washing Machine Outlet Box WM008

Pex-A Expansion InletCenter and Side Drain

If your system is Pex-A, this is the short list — and it comes with brass valves and arrestors.

Pex-A expansion is its own world, and most boxes in this group will not touch it. This one takes a 1/2 inch Pex-A expansion inlet on the F1960 profile feeding a 3/4 inch MHT outlet, so it connects to an expanding fitting system and is explicitly not compatible with stainless steel clamp or copper crimp ring systems. Buy it only if the pipe coming out of your wall is Pex-A.

What you get for going with it is genuinely good hardware: lead-free 1/4-turn hot and cold brass ball valves with stainless steel water hammer arrestors installed, plus both a central and a side drain for discharge routing. The body measures 9.25 inch x 3.5 inch x 8 inch with a pre-installed support bracket and a faceplate cover in the box. The compatible-pipe rule is strict here, so confirm your system before ordering.

What buyers report is that it works well on Pex-A tubing and installs without drama, with the solid brass valves earning their own praise. The thing to keep on the radar is alignment — this box wants its rough opening set true, and a crooked cut in the drywall will make the faceplate sit proud. With 550+ ratings behind it, it is the most established box on this list, and Pex-A homeowners have fewer alternatives anyway.

Why Pex-A owners land here

  • F1960 Pex-A expansion inlet — the connection most boxes skip
  • Lead-free brass 1/4-turn valves with stainless steel arrestors installed
  • Center and side drains give two discharge routes
  • Pre-installed support bracket and faceplate cover included

What to get right

  • No compatibility with stainless steel clamp or copper crimp ring systems
  • Faceplate sits proud if the rough opening is cut out of square
  • Requires a Pex-A expansion tool to make the connection

The Pex-A answer: a proper expansion-profile box with brass valves and arrestors, for a system that offers few competitors.

Only if the pipe fits: check for Pex-A tubing before you order — a crimp or clamp system will not connect to this inlet at all.

Know the Specs

Inlet connection type (crimp, push-fit, expansion)

The inlet is where your supply pipe meets the box. A 1/2 inch PEX crimp inlet on the F1807 profile needs a crimping tool and a ring to clamp the pipe. A push-fit inlet takes PEX, copper, CPVC, or PE-RT pipe with no tool at all — you push and the fitting grips. A Pex-A expansion inlet on the F1960 profile needs an expansion tool and only mates with Pex-A tubing. These three are not interchangeable, and picking the wrong one is the most common reason a box goes back to the seller.

Outlet thread and drain port

The outlet is the 3/4 inch thread your washer hose screws onto. MHT means male hose thread, which is what most hoses expect; FHT means female hose thread, so check your hose before you match it. The drain is the separate port that takes the discharge hose back into the wall. A center drain gives you one route; a center plus side drain gives you two, which helps when the machine sits off-center or the hose run is tight.

Rough opening versus faceplate size

Cut the hole to the rough-opening figure, not the faceplate figure. The WHK-W01 illustrates it exactly: an 8.2 inch wide x 5 inch high x 3 inch deep rough opening behind a 10.2 inch wide x 7 inch high faceplate. The difference is the flange that hides the drywall cut. When a listing gives one number, ask which one it is before you put a saw to the wall.

Water hammer arrestors explained

A water hammer arrestor is a small chamber that absorbs the pressure spike when a valve closes fast, which is what causes the bang or hum in your pipes. Stainless steel arrestors are built into some boxes on this list, like the WHK-W01 and the EFIELD WM010. If your laundry shares a wall with a bedroom, this is the spec that decides how quiet the room stays.

Common Questions

Will a crimp PEX box work if my wall already has Pex-A pipe?
No. A 1/2 inch PEX crimp inlet on the F1807 profile will not accept Pex-A tubing, and the WHK-W01 states clearly that its connector is for PEX B and not PEX A. For Pex-A you need an expansion-profile box like the EFIELD WM008. Check the pipe printing before you buy, because this is the one mismatch no amount of careful installation fixes.
Can I install a push-fit washer box without any tools?
You can skip the crimping tool, torch, and glue entirely. A push-fit inlet like the one on the SUNGATOR or the EFIELD WM005 accepts PEX, copper, CPVC, or PE-RT pipe by pushing it into the fitting to lock. You still need a pipe cutter to make a clean, square cut, and that cut quality decides whether the joint seals. Bring the disconnect clips too, since they are what let you release the fitting later.
What is the difference between a center drain and a side drain?
A center drain puts the discharge port right in the middle of the box, directly behind the washer. A side drain adds a second port off to one side, which gives an alternate route for the hose when the machine sits wide or the run is short. Boxes like the SUNGATOR, EFIELD WM005, and EFIELD WM008 carry both a central and a side drain. If your hose only reaches one direction, that second port can save the layout.
Do I need a water hammer arrestor in my laundry box?
It depends on how much pipe noise bothers you. A hammer arrestor absorbs the pressure shock when a valve shuts, which is the thud or hum that travels through the wall. The WHK-W01 builds stainless steel arrestors in and the maker says the design reduces running noise from a portable washer. If your laundry backs onto a bedroom or the noise carries through the house, it is worth having. Otherwise, a plain box does the job.
What rough opening do I cut for a recessed washer box?
Cut to the rough-opening figure the maker publishes, not the faceplate. The WHK-W01 needs an 8.2 inch wide x 5 inch high x 3 inch deep opening, and its faceplate is 10.2 inch wide x 7 inch high. The extra trim width is the flange that covers the cut edge. If a listing gives only one dimension, ask whether it is the hole or the cover before you start cutting.
Will a 3/4 inch MHT outlet fit my existing washer hose?
MHT is male hose thread, the standard thread most washing machine hoses expect to screw onto. If your hose has a female connector, it mates with the MHT outlet on boxes like the EFIELD WM002 and the SECKWHALE MH-231. One exception to watch: the SUNGATOR lists a 3/4 inch FHT outlet, which is female hose thread. Check the connector on your hose before ordering either way.
Can I mount a washer box upside down or inverted?
Some support it and some do not, so check the listing. The HeSun WM048-1 states support for both traditional and inverted setups, and the SUNGATOR allows inverted installation with a box and frame that detach from each other. Inverting helps when the drain line lands high on the wall or the stud layout forces it. Running a box the wrong way in a model that does not allow it can leave the drain port facing the wrong direction.
What does UPC or NSF certification on a washer box mean?
It means the box has been listed to a published plumbing standard rather than built to no standard at all. The SECKWHALE box meets American standards and complies with UPC and NSF requirements, and the WHK-W01 carries CUPC and NSF certification. That matters most at inspection time, because an uncertified fixture can fail a rough-in inspection regardless of how well it works. Ask for the listing if your job needs to pass inspection.
How long does a washer wall box with drain usually last?
The valve bodies are what age. A lead-free brass valve, as on the SECKWHALE, EFIELD WM010, and EFIELD WM008, resists corrosion and abrasion better than plastic in standing water. The housing matters less once the drywall is closed, though a plastic body flexes more during install. Once the drywall is closed, the box stays untouched until the washer is replaced; the valves and connections are what you will revisit.
Can a washer box with drain be used for a portable or apartment washing machine?
Yes, provided the hose threads match. A portable washer typically feeds from a standard 3/4 inch MHT outlet and discharges through the drain port, which is exactly what these boxes provide. The WHK-W01 even notes that its arrestors target the hum a portable washer makes while running. Just confirm the outlet thread direction on your machine’s hose before ordering.

The Bottom Line

For most homes with a standard crimp-PEX rough-in, the washer wall box with drain winner is the EFIELD WM002, because it combines a 1/2 inch PEX crimp F1807 inlet with a center drain, a pre-installed support bracket, and a snap-on frame for drywall up to 1 inch in a compact 9.25 x 3.5 x 8 inch body. If your pipe is copper, CPVC, or mixed and you would rather not buy a crimp tool, the SUNGATOR push-fit box takes all four pipe types and adds a side drain alongside the center one. And if pipe noise is the reason you are shopping, the WHK-W01 builds stainless steel water hammer arrestors into the valve bodies and publishes its rough-opening dimensions so you cut once.

One last check before you order: look at the printing on the pipe coming out of your wall, then match the inlet type. Crimp, push-fit, and Pex-A expansion are three separate systems, and the right box is the one that accepts yours.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top