Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your washer fills, hums, then refuses to spin — and the lid lock light blinks at you like it knows something you don’t. Nine times out of ten the culprit is a small plastic-and-wire lid lock assembly that has died, not the whole machine. This guide walks you through the replacements that actually match common LG, Whirlpool, GE, Maytag, Kenmore, Frigidaire and Amana top-loaders, so you can match your model number, order once, and get the laundry moving again.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Fitment is the whole game here — the right part number on the wrong machine is still the wrong part. Below you will find a full breakdown of the best washer lid lock assembly options, sorted by brand family and harness style so you can buy with confidence.
Top Picks



How To Choose The Best Washer Lid Lock Assembly
The single most important thing you can do is find your washer’s model plate — usually inside the lid opening or on the back panel — and match it against the seller’s compatibility list word for word. A lid lock assembly is a safety interlock, meaning it physically stops the drum from spinning while the lid is up. If the part doesn’t match your machine’s wiring, the control board will throw an error and the washer will sit there doing nothing.
Match the wire count before anything else
Lid lock switches come in different wire counts, and the listing will tell you whether it is a 3-wire or 4-wire switch. A 4-wire switch carries one extra signal line to the control board, so putting a 3-wire part on a machine wired for four leaves you with a connector that won’t seat. Count the wires on your old part first, then buy to that number.
Read the cross-reference list like a checklist
Good listings print every OEM number the part replaces — for example a switch that stands in for W11307244, W10682535 and W10838613 covers a whole family of Whirlpool and Maytag top-loaders. Find your original part number on that list and you have your answer. If your number is missing, the part is not for you, no matter how close the photo looks.
Look at how the harness is protected
The wire bundle on a lid lock sits right where the lid slams shut, so the harness takes a beating. Listings that describe a corrugated tube, a rubber protective layer, or a fixed lock to keep the wires tidy are telling you the part was built for that vibration. A corrugated tube or fixed wire lock matters more than the look of the housing.
Side-by-Side Comparison
| Model | Best For | Brand Family | Wire / Harness | Warranty Stated | Amazon |
|---|---|---|---|---|---|
| OEM Mania EBF61674802★ Best Overall | LG and Kenmore owners who want the longest harness | LG / Kenmore | ~49.2-inch (125 cm) harness | — | Amazon |
| 2026 Upgraded W11307244 W10682535Best Value | Whirlpool Cabrio and Maytag families on a budget | Whirlpool / Maytag / Kenmore | 3 wires | 3 years | Amazon |
| WH01X27954 3-Pack KitComplete Kit | GE and Hotpoint owners who want the bezel and striker in one box | GE / Hotpoint | Switch + bezel + striker | — | Amazon |
| Qagea W11307244 3-Wire | Whirlpool and Maytag owners replacing the switch alone | Whirlpool / Maytag / Amana / Kenmore / Crosley | 3 wires | 3 years | Amazon |
| Blutoget W10404050 W10238287 | Whirlpool WTW and Maytag MVW owners with a 4-wire switch | Whirlpool / Maytag / Kenmore / Amana | 4-wire switch + striker + bezels | 730 days | Amazon |
| WH44X10288 | GE and Sears stacked-unit owners | GE / Kenmore / Sears | 120V, 60Hz switch | — | Amazon |
| 137353302 Frigidaire | Frigidaire and Electrolux front-load families | Frigidaire / Electrolux / Kenmore | — | 2 years | Amazon |
| Walpica W10404050 Kit | Maytag Centennial and Whirlpool Cabrio with bezels included | Whirlpool / Maytag / Kenmore / Amana | 4-wire switch + striker + 2 bezels | 1 year seller | Amazon |
| Techecook W10810403 | Cabrio, Bravos XL and Kenmore Series 600/700 owners | Whirlpool / Kenmore / Maytag / Crosley | 6-color copper harness | 15 years | Amazon |
Detailed Reviews
1. OEM Mania EBF61674802 Washer Lid Lock Switch
Our pick — 4.5+★ from 300+ verified ratings; the strongest balance of quality and price.
The long-harness LG and Kenmore fix that threads through awkward cabinet openings without a fight.
If your LG or Kenmore top-loader has gone silent with a lid lock error, this is the part that gets it spinning again. The assembly comes with roughly 49.2 inches (125 cm) of wire harness — about four feet of cable — which gives you real slack when the connector sits deep behind the cabinet. Shorter harnesses force you to fish the plug through a tight gap; this one lets you route it comfortably.
What wins people over is plain function: the switch detects the lid and locks it during the wash and spin cycles, exactly as the original did. The build quality and the ease of installation are the next things that come up again and again in owner feedback, and the value angle is real too — a handful of owners note it spared them a whole new machine. It also stands in for part numbers EBF60665201, PS8751171 and AP5785599, so older cross-references still land here.
One honest note: this is an aftermarket part, not an LG-branded component, and the listing says so plainly. The listing also asks you to confirm your model with a Ctrl + F search of the compatibility list before you buy, which is worth doing. At 5.6 ounces it is the heaviest assembly here, against 3.2 ounces for the WH01X27954 kit, and that extra mass comes from the longer harness, not from a beefier housing.
What earns the top spot
- Roughly 49.2 inches (125 cm) of harness gives you routing slack the shorter assemblies don’t
- Cross-references EBF61674802, EBF60665201, PS8751171 and AP5785599 in one part
- Functionality is the thing buyers praise most — the lock and lid-detection behave like the original
- Installation feedback is consistently positive, so a first-timer can manage it
Where it asks something of you
- Aftermarket part, not an LG component — the listing is upfront about that
- You must confirm your exact model against the list before ordering
- 5.6 ounces versus 3.2 ounces for the WH01X27954 kit
The right call: LG and Kenmore top-loader owners who need harness length and a broad cross-reference in one part.
Check first: your model must appear on the compatibility list — this assembly is built for LG-family machines only.
2. W11307244 W10682535 Washer Lid Lock Switch
A 3-wire Whirlpool-family switch that covers an unusually long list of model numbers for entry-level money.
The W11307244 footprint fits a wide spread of machines — Whirlpool, Maytag, Kenmore, Crosley, Admiral, Amana, Inglis and Roper all appear on the compatibility list, plus Kenmore Series 110, 200 and 500. The listing cross-references W10682535, W10838613, W10838613VP, W11253733, AP5981544 and more, so if you are replacing an original with any of those stamps you are covered. That breadth is why it lands near the front of this list.
The housing is ABS plastic with a high-temperature-resistant PBT section, and the corrugated tube is built to bend rather than crack. That flexibility matters because the harness is the first thing to fail when the lid slams. Installation is described as a few-minute job with a screwdriver and pliers, and the listing points you to online repair videos if you want a walkthrough.
The honest trade-off sits in the reliability record. Some buyers report it works like a charm, and the seller backs it with a 3-year warranty — but the quality feedback is genuinely mixed, with a run of units described as never working and the plastic called poor. If you want the safest bet, the OEM Mania pick at the top is the steadier performer; if you want broad Whirlpool coverage for the least money, this is the value play.
Why it earns a slot: The compatibility list is the star — a W11307244-pattern switch that reaches into Whirlpool, Maytag, Amana, Roper and Kenmore Series 110/200/500 territory, with a 3-year warranty behind it.
The part to weigh: Mixed quality reports mean this is the pick where you want to keep your receipt and test the lock light in the first week.
Reach for this if: you are on a tight budget and your model number shows up on that long Whirlpool-family cross-reference.
Look elsewhere if: you would rather pay a little more for a part with a stronger reliability record.
3. WH01X27954 Washer Lid Lock Switch 3 Packs
Everything the GE lid lock job needs in one box — switch, bezel and striker together.
Most lid lock jobs fail on the second trip to the mailbox. You order the switch, then discover the bezel cracked and the striker is worn. This Cykemo kit bundles all three: the WH01X27954 lid lock switch, the WH02X24399 striker and the WH01X24381 bezel. If your GE or Hotpoint top-loader has stopped starting, or the lid won’t open and close cleanly, one order covers the whole repair.
Functionality is what carries this kit — the lock does its job cycle after cycle, and the fit lands correctly on GE and Hotpoint models including the GTW460, GTW335, GTW220 and GTW330 series and the HTW240/HTW200 line. Installation needs no special tools, though you should cut the power and put on work gloves first, as the listing advises. At 3.2 ounces it is lighter than the 5.6-ounce OEM Mania part.
The caveat worth knowing: durability feedback is mixed, with some units reported not to last. That is a fair caution on a complete kit sold at this tier — many buyers are perfectly happy, but keep the packaging until you have run a few loads. For GE-family owners who want a single-box fix, the convenience is hard to argue with.
The bundle argument: Three parts in one order — switch, striker and bezel — means no second wait when the small pieces are the worn ones.
Set expectations honestly: The kit is light and simple to fit, but durability is the one area where feedback splits; run a test load before you recycle the box.
Built for: GE and Hotpoint top-loader owners who want the full trio — switch, bezel and striker — delivered together.
Consider the alternative: if long-term durability is your top priority, the OEM Mania and Techecook picks carry stronger feedback.
4. W11307244 W10682535 Washer Lid Lock Assembly
The switch-only route for Whirlpool and Maytag owners who already have good bezels and strikers.
Same W11307244 pattern as the value pick above, but this Qagea version is sold as the switch alone — which suits you if the bezel and striker on your machine are still intact. Factory testing and an ISO-certified manufacturing claim are on the listing, and the part cross-references W11307244, W10682535, W10838613, W10838613VP, W11253733, PS12704713 and AP6832601.
The straightforward win here is that it solves the door-not-locking problem without piling up spare parts you will never use. It fits Whirlpool, Maytag, Amana, Kenmore and Crosley machines, and the installation is described as a quick, simple swap. A 3-year warranty gives you a clear path if the unit misbehaves — the seller promises a reply within 24 hours.
The quality feedback is divided, with some describing the build as cheaply made and others having no trouble at all. That split is the most honest thing to say about this one. Fit it carefully, confirm the connector seats fully, and you are most of the way there. Owners who matched their model number precisely report a smooth fix; those who eyeballed it often don’t.
The case for the switch-only buy
- Replaces a long cross-reference including W11307244, W10682535, W11253733 and AP6832601
- Simple swap described as quick to install
- Comes with a stated 3-year warranty and a 24-hour reply promise
What to keep in mind
- Build quality splits opinion — some find it cheaply made
- Switch only, so check your bezel and striker before ordering
- Fit depends entirely on matching your exact model
Best fit: Whirlpool and Maytag owners replacing just the switch when the surrounding trim is still good.
skip it if: your bezel or striker is cracked — the WTW kit-style bundles cover that in one order.
5. Blutoget W10404050 W10238287 Washer Lid Lock Latch Switch
The 4-wire kit for Whirlpool and Maytag owners whose old switch clicked but never locked.
A 4-wire switch carries more signal lines than the 3-wire versions above, so if your machine came wired for four, this is the assembly that matches. It bundles the W10238287 plug connection switch, the W10240513 lid strike, a white bezel, a grey bezel and an instruction sheet — everything the listing says is needed to complete the install. That completeness is the reason it earns a spot on a machine that would otherwise take a 3-wire part and throw a lock fault.
The ABS housing is described as crack-resistant, and the striker holds the door closed during the wash cycle while the switch keeps the drum from spinning during use. There is also a safety angle worth naming: the lock stops anyone reaching into the drum mid-spin, which the listing points out as useful in a home with kids. What buyers praise most is the plain functionality — it keeps the door latched and restores normal cycles.
The follow-up question a buyer will ask: will it fit my exact model? The compatibility lists are enormous, covering a wide spread of WTW4800, WTW4810, WTW5640, WTW5700 and 7MWTW models along with Maytag MVW7232HW, MVWC450 and MVWX500 families plus Kenmore 110-series numbers. Check your plate carefully. The 730-day after-sales service is the safety net if you get it right and the part still acts up.
Where it stands out: The 4-wire connector plus strike and bezels in one box — a genuinely complete repair for a four-line machine.
Read before you click: The model lists are long but specific; verify your number appears before ordering, because the 4-wire layout will not substitute for a 3-wire harness.
The match: Whirlpool WTW and Maytag MVW owners with a 4-wire switch who want bezels and striker bundled in.
The mismatch: if your old part has 3 wires, this is not your part no matter how the photo looks.
6. WH44X10288 Washing Machine Door Latch Lid Lock Switch
A tiny 2.08-ounce switch that keeps GE stacked units latched through the spin cycle.
At 2.08 ounces, this is the smallest assembly in the roundup — and it is built for the tight spaces inside GE stacked laundry centers. The WH44X10288 spec runs on 120V 60Hz, which matches standard household current for these machines. It replaces AP5270191, 1974376, AH3496878, EA3496878 and PS3496878, so old cross-reference numbers still apply.
Functionality is what earns this a spot: it prevents the lid opening during wash and spin, and the washer simply will not run unless the door locks securely. Owners consistently report it works and installs easily. Fit is the key — check your machine’s model plate against the long GE and Kenmore list, which covers GTUN275, GTUP240, GTUP270, GUD24, GUD27, GUV27 and XUD27 series along with many 363-prefix and 267-prefix Kenmore numbers.
Where it asks something of you: this is a smaller component than the all-in-one kits, so it does not include bezels or a striker. If only the switch failed, that is fine; if the surrounding trim is chipped, you will need those pieces separately. Otherwise the swap is straightforward for anyone comfortable with a screwdriver.
Why it makes the cut: A compact, lightweight switch that fits a particular family of GE and Sears stacked units where bigger assemblies simply won’t fit.
What it doesn’t include: No bezels or striker in the box — a switch-only part for a switch-only failure.
Ideal for: GE, Kenmore and Sears stacked laundry-center owners who need the slim WH44X10288 switch alone.
Think twice if: your bezel is cracked too — you would need to order those parts separately.
7. 137353302 Washing Machine Lid Lock Switch
The Frigidaire and Electrolux lock for machines that have stopped mid-cycle with a lid error.
Frigidaire and Electrolux top-load families use a different lock design from the Whirlpool and LG parts, and the 137353302 covers them. It replaces AP5962162, PS11703540 and 4245274, and fits Electrolux models like the CFLE3900UW1, FFLE3911QW0 and FFLG4033QW0 alongside Frigidaire numbers such as FFLE3900UW0 and CFLE3900UW0, plus Kenmore 417-prefix pairings.
Feedback on this Endurance Pro part is clean: it works, installs easily and gets machines back into use. The quality, fit and value all receive positive owner comment, and at 1.76 ounces it is a featherweight of a component. The listing also brings a 2-year, no-questions-asked warranty — longer than the 1-year seller coverage on the Walpica kit.
The limit a buyer should know: though the listing mentions Kenmore Sears numbers, the cross-reference is largely built around the Frigidaire and Electrolux families. If your washer is a Whirlpool or Maytag, this is not your part. Confirm your model number on the list and you will be in the right neighborhood.
What you get
- A lock built for the Frigidaire and Electrolux family, not a repurposed Whirlpool part
- Owner feedback is consistently positive on function and easy installation
- 2-year, no-questions-asked warranty backs the purchase
Where it draws the line
- Built around Frigidaire and Electrolux machines, not the Whirlpool or LG families
- No bezel or striker in the box
- Verify your model on the list before ordering
The right choice: Frigidaire and Electrolux owners who want a branded-family lock with a 2-year warranty.
The wrong choice: if your washer is a Whirlpool, Maytag or LG, the connector pattern will not match.
8. W10404050 W10238287 Lid Lock
A complete 4-wire repair kit for Cabrio and Centennial owners who want spare trim in the box.
This is the second W10404050 kit on the list, and it counts its bezels differently: two of them, one white and one grey, plus the strike and the 4-wire switch. If you’re unsure which trim color your machine uses, having both in the box saves a second order. The switch itself takes the guesswork out of diagnostics — Walpica bundles every part the listing says can fail in the lid-lock system.
Owner feedback centres on function and installation: the lock operates correctly and the swap is quick. The listing describes the repair as something you can follow along with via online videos, and it points out the wide compatibility with Whirlpool Cabrio and Duet lines, Maytag Centennial and Bravos X, Amana and Kenmore 110-series top-loaders. The cross-reference list is long enough to cover W10404050, W10238287, AP5263307, PS3497627 and the W10240513 strike numbers.
What a buyer should know: the warranty description is a 1-year seller warranty, shorter than the 730-day and 3-year coverage on other picks here. The part is otherwise a solid, complete kit. If your bezel is fine and you only need the switch, the Blutoget or Qagea pick gets you there without the extra plastic.
The bundle case: Two bezels plus the 4-wire switch and strike in one box takes the color guesswork out of the job.
Worth noting: 1-year seller warranty is on the shorter side compared with the other 4-wire kit on this list.
Pick it if: you have a Whirlpool Cabrio, Maytag Centennial or Bravos X and want both bezel colors in the same box.
Pass it if: you need long warranty coverage or only need the switch without the trim.
9. Techecook W10810403 W10861642 W10787836 Cabrio Washer Lid Lock
A tightly built 6-color copper harness and a 15-year warranty — the Cabrio lock that plans to stay put.
Six colors of copper wire and a protective layer wrapped around the harness are the details that set this apart. The housing is high-toughness, high-heat-resistant PBT, and the harness carries a fixed lock to keep the wires tidy so they don’t snag as the lid moves. The listing also says the part includes screws and a base plate, making the install simpler than a bare switch. Those construction details matter most in the loaded lid-lock zones of a Cabrio or Bravos XL.
Owner feedback is focused on functionality: the switch detects the lid and completes the cycle as it should, and DIY installation lands in roughly the 30-minute range. It replaces W10810403, W10861642, W10787836, W10637463, W10648012, W10810403VP and many more, and fits WTW7000DW0, WTW7300DW0, WTW8500DW1, WTW8040DW4 and the MVWB755, MVWB765 and MVWB835 families. Kenmore Series 600 and 700 numbers sit on the same list.
The obvious draw is the 15-year warranty, against the 3-year coverage on the Whirlpool-family picks. That is a manufacturer’s stated coverage, not a promise about lifespan, so treat it as the safety net rather than a guarantee of 15 trouble-free years. What it does tell you is that the seller expects the part to hold up.
What sells it: The harness construction — pure copper, six-color wires, a fixed lock for tidiness — plus a warranty that dwarfs the rest of the field.
What to keep in mind: Verify your exact model; the Cabrio/Bravos cross-reference is broad, but a mismatched connector will not seat properly.
Best fit: Whirlpool Cabrio, Maytag Bravos XL and Kenmore Series 600/700 owners replacing a worn lock and wanting long coverage.
Look at the OEM Mania pick instead: if you are on an LG or Kenmore machine with a different wire layout.
Know the Specs
The wire count and what it means
Lid lock assemblies show up as 3-wire or 4-wire parts. The wires carry the signal from the switch to the control board — lid open, lid closed, locked. If you install a 3-wire switch on a machine wired for four, the connector won’t seat and the board may throw a lock error. Count the wires on your old part first, then match that number to the listing.
Harness length and protection
The wire harness runs from the switch to a connector deep inside the cabinet. A longer harness like the 49.2-inch (125 cm) version gives slack for routing through tight openings. A corrugated tube, rubber outside layer or fixed lock helps keep the bundle from fraying where the lid slams shut. A corrugated tube or fixed wire lock keeps the bundle from fraying where the lid slams shut.
Common Questions
How do I know which lid lock assembly fits my washer?
What is the difference between a 3-wire and 4-wire lid lock switch?
Why does my washer lid lock click but the drum won’t spin?
Can I replace a washer lid lock assembly myself?
How long does a lid lock assembly last?
Do I need the bezel and striker too, or just the switch?
Will a generic lid lock work in my Whirlpool Cabrio?
What does the lid lock assembly actually do during a wash cycle?
Does a lid lock assembly come with a warranty?
Is an aftermarket lid lock as good as the original?
The Bottom Line
The best washer lid lock assembly for most LG and Kenmore households is the OEM Mania EBF61674802 — its 49.2-inch harness, four-number cross-reference and consistent functionality feedback make it the safest buy. If you are on a Whirlpool-family machine and want to spend the least, the 2026 Upgraded W11307244 W10682535 covers an unusually broad model list. For GE and Hotpoint machines, the WH01X27954 three-piece kit stops you making a second trip for the bezel and striker. And when durability is your top priority, the Techecook W10810403 backs its copper harness and fixed wire lock with a 15-year warranty that no other pick comes close to.
The one nudge worth giving: whichever pick you land on, confirm the wire count and the model number before you add to cart. That single check is the difference between a 30-minute fix and a part that won’t seat.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





