A thermal jacket is an insulated outer layer that traps still air around your body to slow heat loss, and its warmth comes from insulation type, loft, and a shell that blocks wind.
Pull a puffy jacket off the rack and it feels like nothing — then you wear it into 30-degree wind and stay comfortable. That gap between weight and warmth is the whole story of thermal jackets, and it comes down to trapped air. REI’s insulated outerwear guidance describes the same mechanism: insulation holds relatively still air near the body, slowing heat transfer, while the shell cuts wind penetration. Understanding which parts do the work tells you which jacket to buy and, just as important, when the one you own will quietly fail you.
How Does Insulation Trap Heat?
Insulation works by holding pockets of air still, because still air is a poor conductor of heat and moving air strips warmth away fast.
Down plumules — the fluffy underlayer geese and ducks wear — create thousands of tiny air spaces. Synthetic fills imitate that lofted structure with water-repellent polyester fibers. Either way, the fiber itself is not what keeps you warm; the air it holds is.
Three construction details decide whether that trapped air stays put:
- Baffles. Sewn or welded compartments keep insulation evenly distributed and prevent cold spots where fill migrates.
- Seals at the edges. Draft tubes behind the zipper, elastic cuffs, drawcord hems, and a close-fitting collar stop warm air escaping and cold air sneaking in.
- The shell. Windproof and water-resistant shells reduce convective heat loss. A thermal jacket is not automatically waterproof — that depends on the shell fabric, seams, closures, and the manufacturer’s own spec sheet.
Fit belongs in this list too. Leave room for a base layer and a mid layer without compressing the fill. Squash the loft and you squash the warmth.
Down, Synthetic, Or Hybrid: Which Insulation Fits Your Weather?
Down wins on warmth per ounce in cold, dry conditions; synthetic holds some insulating ability when damp and suits wet or sweaty use; hybrids split the difference by placing synthetic fill in moisture-prone zones.
| Insulation | Verified Characteristics | Best For |
|---|---|---|
| Down | Duck or goose down; very warm for its weight, light, highly compressible; loses insulation when wet and dries slowly | Cold, dry days; trips where packability matters |
| Synthetic | Usually polyester; keeps some warmth when damp, dries faster, costs less, heavier and less compressible than down | Wet climates, humid air, high-output activity |
| Hybrid | Down body with synthetic fill at sides, hood, or cuffs; more moisture-tolerant, less packable than all-down | Variable weather and damp-prone zones |
| Fleece or wool | Provides warmth but does not trap air in lofted compartments the way down and synthetic fills do | Layering, not standalone deep cold |
Real spec sheets show the range. The REI Co-op Magma 850 Down Hoodie uses 850-fill-power goose down, the Patagonia Down Sweater uses 800-fill down, and the Arc’teryx Atom Insulated Hoody carries 60 g of Coreloft Compact synthetic insulation with stretch panels for ventilation. The Outdoor Research Snowcrew Down Jacket pairs 700-fill down with 150 g of VerticalX Eco polyester and adds a two-layer Ventia waterproof shell, pit zips, and a listed weight of 2 lb 8.5 oz. Those are manufacturer-reported figures, not universal standards.
What Do Fill Power And Fill Weight Actually Mean?
Fill power measures volume — cubic inches occupied by one ounce of down — while fill weight measures the actual amount of insulation in the garment. They are different numbers, and mixing them up is the most common buying mistake.
Typical down runs from roughly 450 to 900 fill power, and higher fill power generally means more loft, better warmth-to-weight, and easier packing. But a high fill-power jacket is not automatically warmer than a lower-fill-power one. Total fill weight, baffle construction, fit, and shell protection all move the result. Comparing fill weight only makes sense between jackets using the same insulation type.
Insulated jackets also carry no standardized temperature rating the way sleeping bags do. That absence of a rating is why reading the spec sheet beats trusting the word “thermal” on a hangtag.
Once you know your insulation and size, shopping gets much shorter — our tested women’s thermal jacket roundup compares fits and warmth levels side by side.
What Shortens A Thermal Jacket’s Warmth?
Wet insulation, compressed loft, and trapped sweat are the three fastest ways to lose warmth you already paid for.
Down in sustained rain or snow clumps and stops insulating, so add a waterproof shell when precipitation is likely. Synthetic fill keeps some warmth when damp, but the jacket can still leak through its shell, seams, zipper, or pockets — damp is not the same as waterproof. Stuffing a jacket long-term in its stuff sack reduces synthetic loft over time, and dirt and moisture degrade down performance, so store it loose and clean. Finally, over-insulating during hard exercise causes sweating, and that moisture cuts comfort and, with down, insulation. Open the pit zips before you overheat.
REI’s down versus synthetic insulation guide covers how each fill behaves when the weather turns.
Sources
- REI Co-op. “Insulated Outerwear: How It Works” Explains trapped-air insulation, loft, baffles, and shell protection.
- REI Co-op. “Down vs. Synthetic Insulation” Compares warmth, wet-weather behavior, and care for each fill type.
- REI Co-op. “How to Choose Winter Jackets” Source for fit, layering, and jacket feature guidance.