Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
If you have lost a center cap off a Volkswagen wheel, you already know the annoyance: one bare grey circle sitting in the middle of a silver rim, visible every time you walk to the car. The fix is a small plastic or metal disc that snaps into the hub bore, and the swap takes minutes with no tools. The part that trips most people up is size. A cap listed as 65mm and a cap listed as 66mm look nearly identical in a photo, yet only one of them will click into your rim. Measure the old cap or the bare hub bore with a caliper before you order anything.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you will find genuine OE caps for specific wheel sizes, plus multi-packs for anyone replacing a full set at once. Each entry names the exact part number it replaces, so you can cross-check it against your own wheel. These are the VW center caps I’d buy right now, sorted by wheel size and part number.
Top Picks



How To Choose The Best Volkswagen Wheel Center Caps
Get the measurement wrong on a center cap and the part is useless to you. There is no adjustment, no adapter, no forgiveness. Either the snap ring (the metal ring that clips the cap into the wheel) clicks into the hub bore (the round hole in the middle of the wheel) or it sits loose and falls out on the first pothole. So your buying decision depends on three things: the diameter, the part number, and if you want one cap or a set.
Measure the bore, not the photo
Every listing quotes at least one diameter, and some quote three. The outer diameter is the full width across the face of the cap, which is what you see when it is seated in the wheel. The inner diameter is the width of the snap ring underneath, which is the part that actually grips the rim. On a cap listed at 66mm outer and 55.5mm inner, those two numbers describe very different circles on the same part. Measure your old cap across the top face for the outer figure, and measure the lip underneath for the inner one. A digital caliper gives you a reading you can trust; a tape measure against a curved edge does not.
Cross-check the VW part number
Volkswagen stamps a part number on the back of the original cap, usually in a format like 3B7 601 171 or 5C0 601 147. Match that number against the listing’s OEM equivalent field and you have far more certainty than any photo can give you. Part numbers matter because VW used different caps across wheel designs, model years and rim diameters, and two caps that look the same from the outside can have completely different snap geometry underneath.
Know your wheel size before anything else
Several caps here are built for one specific rim diameter. A cover made for a 15-inch wheel will not seat on a 17-inch rim even if the badge looks right, because the hub bore and the spoke profile differ between wheel sizes. If your car could have come with either a 15-inch or 16-inch wheel from the factory, check the tire sidewall or the door jamb sticker first. Confirming your rim diameter before ordering is the check that prevents most center-cap returns.
Genuine OE or aftermarket set
Genuine Volkswagen caps arrive as a single piece with the factory chrome or machined finish and the correct snap ring. Aftermarket sets of four cost less per cap and let you refresh all four wheels at once, but the finish and the plastic compound vary by maker. ABS is the common material for the aftermarket caps here, and it holds up fine in normal use. The trade-off is that a painted or resin-domed aftermarket face can look slightly different from a factory chrome cap next to it — worth knowing if you are replacing just one of four.
Side-by-Side Comparison
| Model | Best For | Diameter | Quantity | Material | Amazon |
|---|---|---|---|---|---|
| Genuine VW Hub Cap Jetta 2015-2016 9-spoke★ Best Overall | Factory-correct Jetta replacement | 15-inch wheel | 1 | Chrome | Amazon |
| Volkswagen 3B7-601-171-XRW Center CapWidest Fitment | Single OE cap, widest model spread | Center Cap | 1 | Plastic | Amazon |
| 4Pcs 66mm Wheel Center Caps (Rheedal)Best Set Value | Full set on a budget | 66mm outer / 55.5mm inner | 4 | ABS plastic | Amazon |
| SkinoEu 4 x 65mm Black CV 22 X | Blackout look on 3B7 / 6U7 wheels | 65mm outer / 56mm inner | 4 | ABS | Amazon |
| Biomar Labs 4 x 65mm Black Smile CV 73 | Dom
ed emblem set |
65mm outer / 56mm inner | 4 | ABS | Amazon |
| Volkswagen Wheel Center Cap 5G0-601-171XQI | Carbon-fiber-look alloy cap | Wheel Center Cap | 1 | Aluminum | Amazon |
| VW Center Cap W8 VZ 6N0-601-171-BXF | Genuine OE for W8 VZ wheels | — | 1 | — | Amazon |
| Genuine OEM VW Hubcap Jetta-Sedan 2011-2014 | 15-inch Jetta sedan refresh | 15-inch wheel | 1 | Metal | Amazon |
| VW Genuine Hub Cover Chrome Black Heritage Beetle | Heritage Beetle 17-inch wheels | 17-inch wheel | 1 | Metal | Amazon |
Detailed Reviews
1. Genuine VW Hub Cap Jetta 2015-2016
Our pick — 4.5+★ from 450+ verified ratings; the strongest balance of quality and price.
The factory part number on the back and a chrome face that matches the day the car rolled off the lot.
This is a single genuine Volkswagen hubcap carrying part number 5C0601147DQLV, the OE reference for the 9-spoke 15-inch Jetta wheel. It arrives as one cap with a chrome exterior finish and a snap-on installation — no clips, no adhesive, no tools. You press it into the bore and it seats with the same click the original did.
This is the top pick because you know it fits before you order. It is built to one exact VW part number for one exact wheel, so there is no diameter guessing and no cross-referencing a list of compatible models. Owners back that up with 4.5+ stars from a large base of them, the strongest score in this group. It is also the pick with the most room to compare against the budget end: the 4Pcs 66mm set ships four caps, while this listing is a single cap, so you pay for factory correctness rather than volume.
Fitting this one is quick work. Buyers report it took less than 10 minutes to put on. The recurring theme in the feedback is that the car looks new again afterward and that the cap matches the factory piece exactly — which is the entire point of buying genuine. The honest caveat is that this is one cap, not a set, and it is sized for the 15-inch wheel only. If your Jetta sits on a different rim diameter or a different spoke design, this specific part will not be the right one.
Where it earns its place
- Genuine VW part 5C0601147DQLV, so the badge, chrome finish and snap ring are factory spec
- Snap-on installation with no tools needed — minutes of work, not an afternoon
- Strongest owner score in this lineup at 4.5+ stars
- Chrome exterior finish matches the original cap rather than approximating it
What to weigh first
- Ships as a single cap — replacing all four means ordering four
- Built for the 15-inch 9-spoke Jetta wheel, so other rims or spoke patterns need a different part
- Genuine OE pricing sits above the multi-pack aftermarket sets
Reach for this if: you drive a 2015 or 2016 Jetta on the 15-inch 9-spoke wheel and want the cap to look factory because it is factory.
Think twice if: you have lost more than one cap — a four-piece set will cover the whole car for less than four of these.
2. Volkswagen 3B7-601-171-XRW Center Cap
One plastic OE cap that has quietly become the default replacement across a huge spread of VW wheels.
Part number 3B7601171XRW is among the most widely used center caps in the Volkswagen range, and this is the genuine article in a smooth plastic finish with a snap-on fit. It is a direct replacement rather than a vehicle-specific fit, which is why it turns up on so many different models. If you have an older VW with a bare hub and no idea which cap belongs there, check this number against your wheel first.
Its reputation rests on looking like the part that came off. Owners describe it as identical to the factory piece and note it matches the other wheels on the car, which is exactly what you want when you are replacing one cap out of four. The plastic build is light and the smooth face takes a clean finish rather than a chrome one. That also means it reads as understated next to the chrome caps in this lineup — a difference in look, not in function.
Two things to know before you order. First, this is a single cap. Second, the feedback splits on how it behaves in the bore: plenty of owners have it sit tight and stay put, while some find it works loose during installation. That split is the most-discussed point in the reviews, and it usually traces back to the hub bore rather than the cap. Measure your bore properly and the odds move firmly in your favour. Arriving with surface marks is the other recurring gripe, so inspect the face before you press it home.
The value read: Few parts in this category cover as many vehicles with one part number, and that breadth is the reason to start your search here rather than with a model-specific cap.
The fit note: Because seating varies by wheel, treat the first press as a test — if it does not click firmly, the bore size is the thing to re-check, not the cap.
Best matched to: an older or mixed-lineup VW where you want a genuine cap and only need to fill one hole.
Worth knowing: if all four wheels are bare, buying four singles adds up fast — a set makes more sense.
3. 4Pcs 66mm Wheel Center Caps 3B7601171
Four caps in one box, sized to the millimetre, for roughly what a single OE cap costs.
The measurement is the whole story here. Outer diameter is 66mm, the snap inner diameter is 55.5mm, the snap length is 2.9mm and the height is 16mm. Those four figures describe a recessed cap made of ABS plastic with a painted silver finish. The maker asks you to check your center bore with a digital caliper before ordering, and allows a 0.5mm tolerance for fitment — which tells you how little room there is for a guess.
Against the Biomar Labs set further down, the outer figure differs: 66mm here versus 65mm there, with an inner of 55.5mm against 56mm. Those are small gaps in raw numbers, but a center cap either snaps or it does not, so the comparison is worth making against your own rim rather than against the listing photos. The model coverage is broad and spelled out: 2016-2017 Beetle, CC, GTI, Golf, Jetta, Passat, Tiguan, Touareg and e-Golf, plus the 2016 Eos. It cross-references part numbers 3B7601171 and 5G0601171.
Installation is the easy part — pull the old cap, press the new one in, done, with no tools involved. Owners mention they work perfectly on a 2013 VW Beetle TDI. The one honest note is the colour: the silver painted finish looks good to plenty of owners, but some point out it is not chrome, so it will not mirror-match a factory chrome cap. If your other three wheels are chrome, expect a visible difference on the fourth.
Who this set is built for: anyone whose four wheels are all missing caps, or who wants a spare on the shelf. Four caps for a single-cap price is the math that decides it.
The honest limit: the painted silver is a flat finish, not chrome — great as a matched set of four, less ideal as a one-off match to three chrome originals.
Pick this set when: you have measured a 66mm outer with a 55.5mm inner bore and want all four wheels sorted in one order.
Pass on it if: your bore reads 65mm, or you need a single cap that mirrors an existing chrome wheel.
4. SkinoEu 4 x 65mm Wheel Centre Caps CV 22 X
A black domed badge set where the emblem sits under a resin cap, not a flat sticker.
SkinoEu builds the base from ABS plus PC plastic and puts a high-resolution print sticker under a 3D domed resin cover on top. That resin layer is where the detailing lives: the maker states UV and waterproof protection, a self-healing anti-scratch coating on the surface, and a warranty against yellowing, fading and peeling. Black glossy finish, four caps, snap-on fit. Outer diameter is approximately 65mm with a 0.5mm tolerance, and the inner sits at approximately 56mm.
The part numbers it replaces are 3B7 601 171 XRW and 3B7601171, with 6U7 601 171 named in the title. If that number is stamped on your old cap, the maker says you can order with confidence. If you do not know your rim and hub cap size, their own listing tells you not to buy yet — measure the old cap first. That instruction is refreshingly blunt and it is the right advice for this whole category.
Looks are the strong suit. The domed face and black finish give the wheel a different character from a chrome cap, and that is what purchasers respond to. The fit is the caveat: some find it perfect, others find it too big for their bore. That is a measurement mismatch rather than a build fault in most cases, since the tolerance window is only 0.5mm. Get the caliper out before you commit and this set behaves.
Why the finish sells itself
- 3D domed resin over the emblem looks deeper than a flat printed cap
- Stated UV and waterproof protection with a self-healing anti-scratch surface
- Sold as a matched set of four in glossy black
- Snap-on fit with no tools required
Before you press buy
- Comes in one size only — 65mm outer, 56mm inner
- Some buyers find the fit loose or oversized for their bore
- The base material is ABS rather than metal
Made for: a VW on 3B7 601 171 or 6U7 601 171 caps where you want a black domed set that stands out from chrome.
The one thing to check: the 65mm outer and 56mm inner bore — the listing itself warns against ordering without a measurement.
5. Biomar Labs 4 x 65mm Wheel Centre Caps CV 73
The same domed-resin formula as the SkinoEu set, finished in black with the Smile badge.
Biomar Labs uses the same construction spec as its closest rival: an ABS plus PC base (a hard plastic blend), a high-resolution print sticker under a 3D domed non-toxic resin cover (a raised clear dome that protects the logo), UV and waterproof protection, and a self-healing anti-scratch coating on the surface. You get four caps per box at 65mm outer and 56mm inner, both with a 0.5mm tolerance, in glossy black. The set weighs 90g in total, so they feel light in your hand.
Where this set separates itself is the score. It holds the highest rating in this entire lineup at 4.5+ stars, and it does so on a small base of buyers — the trade-off of being a newer listing rather than a long-running one. That is worth saying plainly, because the number is impressive but the sample behind it is modest. What it does tell you is that the batch going out right now is landing well with the people receiving it, with no recurring complaint surfacing in what has been written so far.
The replaced part numbers are 3B7 601 171 and 6U7 601 171, and the manufacturer part number on the box is CV 73. Same warning applies as with any 65mm cap: measure your old cap or your rim bore first, because the tolerance is tight and a 0.5mm overshoot will not seat. The 2-year warranty is a stated term, and the yellowing and peeling cover is a stated claim from the maker rather than something you can verify from the photographs.
The case for it: a top rating in this category, a domed resin face, and a full set of four in black — this is the set for someone who wants the look and is prepared to measure properly. If you would rather not measure your bore, skip this one and buy a genuine cap matched to your part number instead.
Where it stays modest: the review history is short compared with the long-running OE listings, so you are trusting a small sample rather than a decade of owners.
Choose this if: your cap is a 3B7 601 171 or 6U7 601 171 and you want the black domed set with the best score in this lineup.
Order something else if: your bore is 66mm rather than 65mm, or you want a long track record behind the number.
6. Volkswagen Wheel Center Cap – 5G0-601-171XQI
An aluminum cap in a silver-and-carbon-fiber finish, for the wheel that needs the metal look.
This one breaks from the plastic crowd. The material is aluminum, the color is silver with a carbon fiber pattern, and the exterior finish is machined — so the face has a turned-metal appearance rather than a painted one. It is a single genuine Volkswagen cap carrying part number 5G0601171XQI, with a snap-on fit and vehicle-specific fitment.
The aluminum construction is what you are paying for, and it is the reason this cap sits a step above the ABS sets in the lineup. Machined metal tends to hold its appearance longer than a painted or domed face, and the carbon fiber pattern gives it a finish you will not find on a plain silver cap. Compared with the four-piece plastic sets above, this is the choice for someone replacing a metal cap that has to look right on a wheel with a machined or carbon accent.
The catch is fit, and it is worth being straight about it. The feedback splits on seating — some find it snaps on cleanly and fits perfectly, others find it sits too small and never clicks into place. That is the most-discussed point in this listing by a clear margin, and it is the thing to weigh before ordering. Check your bore measurement and the 5G0 part number against your own wheel, and inspect it on arrival.
The build story: aluminum with a machined finish and a carbon fiber pattern is a cut above the plastic caps here, and on the right wheel it looks the part.
The fit story: seating is genuinely inconsistent across buyers, so this is the cap to buy only once you have confirmed both the bore and the part number match your rim.
Fits the bill for: a wheel that calls for a 5G0-601-171XQI and where a machined aluminum face is the look you need.
Look elsewhere if: you are replacing one cap out of four plastic ones — the metal face will not match them.
7. VW Center Cap 6N0-601-171-BXF
A part-number-first purchase: 6N0-601-171-BXF, new from Volkswagen, for the W8 VZ wheel.
There is not much to dress up here, and that is the appeal. This is a brand-new genuine VW alloy wheel centre cap with part number 6N0601171BXF, made by Volkswagen and sold as a single piece. It is built specifically for the W8 VZ wheel, which means you are buying it by number rather than by eye. If your wheel calls for this part, this is the exact piece; if it does not, no amount of comparison shopping will make it fit.
The listing does not publish a diameter, an inner snap measurement or a material spec beyond the manufacturer, so the part number is your only real reference point. For a buyer who already knows what their wheel takes, that is enough — VW’s own numbering is the most reliable identifier in this category. For anyone still working out which cap they need, this is not the listing to guess from.
Weigh it as a one-part purchase. It does not come as a set, and the listing offers no multi-pack option, so replacing all four means buying four. Against the multi-pack sets above, that is a different kind of buy — you are paying for the genuine W8 VZ part specifically rather than for volume. Measure before you commit, and confirm the 6N0 number against the cap you are pulling off.
Why it holds up
- Genuine OEM Volkswagen cap with the manufacturer part number printed on the listing
- Brand new rather than pulled from a salvage wheel
- Built for the W8 VZ wheel specifically, so the fitment target is unambiguous
What it does not give you
- No published diameter or inner snap measurement, so the part number has to be your check
- Single cap only, with no set option in this listing
- OE pricing rather than multi-pack value
Right for: a W8 VZ wheel that needs the 6N0-601-171-BXF cap and nothing else will do.
Not right for: anyone who cannot confirm that part number on their own wheel first.
8. Genuine OEM VW Hubcap Jetta-Sedan 2011-2014
A metal cap for the 2011-2014 Jetta sedan on 15-inch wheels, and only that combination.
The listing is refreshingly clear about its own limits. A Jetta sedan from those years could have come with either a 15-inch or a 16-inch wheel, and this hubcap fits the 15-inch only. The maker tells you to identify your wheel size before ordering, and that instruction is the single most important line on the page. The cap itself is metal with a machined exterior finish, silver in color, and a snap-on installation.
Fit is the thing this cap gets right, and it is the quality owners come back to talk about. It matches the factory part, seats properly, and the car reads as new again once it is on. Installation is straightforward, and customers note no installation issues to speak of. It is the same story as the 15-inch nine-spoke Jetta cap at the top of this list, and the same reason both earn a spot: when the wheel and the part number agree, a genuine VW cap simply works.
Price-to-value is where this one shines against the other single OE caps here, since a metal finished factory cap at this level is a strong proposition. One owner did report a cap breaking within two weeks of installation, so this is not indestructible, but that is an isolated report against a much larger body of durability feedback that describes the cap staying in good condition over time. It is a single cap, and it will not fit a 16-inch wheel.
The straight answer: a metal, machined-finish genuine VW hubcap for the 2011-2014 Jetta sedan with 15-inch wheels — correct part number, correct finish, correct fit.
The one honest snag: a single report of it cracking early sits alongside far more feedback describing it holding up, so treat the plastic of a hubcap generally as something a hard pothole can surprise.
Reach for this if: you have a 2011-2014 Jetta sedan on a 15-inch wheel and want the factory metal finish back on it.
Look elsewhere if: your Jetta sits on 16-inch wheels — this part number will not fit that rim.
9. VW Wheel Center Hub Cover Heritage Beetle 2012
The chrome Heritage Beetle cap for 17-inch wheels, from the 2012 model year onward.
This is the premium end of the lineup, and it is a specialist part. Genuine Volkswagen, part number 5C0-601-149-D-QZQ, metal construction with a chrome exterior finish, sized for the 17-inch wheel on the Heritage Beetle from 2012 onward. It is listed for left, right, front and rear placement, carries a 1-year manufacturer warranty, and is a direct replacement with a snap-on fit. The tire is not included, as you would expect.
For a car like the Heritage Beetle, the finish is the whole point, and a genuine chrome cap is what keeps the wheel looking intentional rather than patched together. The fit quality backs it up — the cap seats perfectly and the quality reads as decent and factory-correct. That is not a long review history being drawn on, so treat the feedback as confirmation of fit and finish rather than a long-term reliability record.
Two things to hold in mind. It is a single cap, and at this end of the market a full set of four is a serious outlay, so most people will buy this to replace the one that went missing. And it is strictly a 17-inch Heritage Beetle part — measure the rim and confirm the 5C0 part number before ordering, because nothing about this cap is universal. It is also vulnerable to curb scuffs in the way any chrome surface is, so it is worth protecting.
Go for it when: you have a Heritage Beetle on 17-inch wheels and you want the genuine chrome cap rather than a lookalike.
Hold off if: you are on 15-inch or 16-inch wheels, or you need four caps — this is priced and built as a single specialist piece.
Know the Specs
Outer diameter vs inner diameter
The outer diameter is the full width across the face of the cap — the measurement you see when it is seated. The inner diameter is the narrower ring underneath that grips the hub bore. On the Rheedal set those are 66mm and 55.5mm respectively, and on the Biomar Labs set they are 65mm and 56mm. Two different numbers for one part, which is why a single measurement never tells you whether a cap will fit. Measure both: the face for the outer figure, the lip underneath for the inner.
Snap depth and tolerance
Snap length is how deep the gripping ring reaches into the bore — 2.9mm on the Rheedal set — and height covers the full depth of the cap at 16mm. The tolerance figure, often listed as 0.5mm, is the window the maker allows for manufacturing variation. It also tells you how precise your own measurement needs to be. A 0.5mm window against a hub bore means a cap that is a millimetre off will not click in. A digital caliper gives you a reading inside that window; a tape measure does not.
Part numbers and OEM equivalents
Volkswagen part numbers such as 3B7 601 171, 5C0 601 147 and 6N0 601 171 appear on the back of the original cap and in the listing’s OEM equivalent field. Matching those digits is the most reliable check you can make, ahead of photos, ahead of diameter, ahead of model-year lists. Two caps from the same brand can look identical and have completely different snap geometry underneath. The part number is the thing that describes the geometry.
Materials: ABS, resin and metal
Most aftermarket sets here are ABS plastic, sometimes blended with PC. The domed sets add a resin cap over the printed emblem, which the maker states carries UV and waterproof protection and a self-healing anti-scratch coating. Genuine VW caps come in chrome, machined metal and aluminum depending on the wheel they serve. Metal holds a machined finish well and tends to keep its appearance; ABS is lighter and keeps the cost of a four-piece set down. Neither is a better choice in the abstract — it depends whether you are matching an existing wheel or refreshing all four.
Common Questions
How do I know if my wheel takes a 65mm or a 66mm center cap?
Will a 15-inch Jetta hubcap fit a Jetta with 16-inch wheels?
Are these center caps genuine Volkswagen parts?
How long does a center cap take to install?
Why did my center cap fall off and how do I stop it happening again?
Do these caps come as a set of four or as singles?
Is a domed resin cap better than a flat printed one?
Can I use a 3B7 601 171 cap on a 5G0 601 171 wheel?
Where is the part number on a Volkswagen center cap?
Will an aftermarket set of four look different from my factory caps?
The Bottom Line
If your wheel and your part number agree, order the Genuine VW Hub Cap Jetta 2015-2016 9-spoke — factory chrome, factory snap ring, factory part number 5C0601147DQLV, and the strongest owner score in this lineup. For a black domed set of four on a 3B7 or 6U7 wheel, the Biomar Labs CV 73 carries the best rating here, and its sibling the SkinoEu CV 22 X brings the same construction to a slightly larger bore. And if money is the deciding factor on a full-car refresh, the Rheedal 66mm set puts four caps on your wheels for about the price of one OE piece.
One last thing worth saying: measure before you buy. Every return and every rattle in this category starts with a bore that was guessed rather than measured. A caliper reading against the numbers on this page turns a frustrating purchase into a five-minute job — and that is the whole trick to the volkswagen wheel center caps that actually stay in place.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.





