7 Best Washer and Dryer Risers | 1200 Lbs Of Steel, Zero Wobble

Disclosure: This post contains affiliate links. As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Learn more

Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.

If your back aches every time you haul wet washing out of a front-loader, a riser is the cheapest fix in the laundry room. The right one lifts the door to hip height, holds the drum steady through the spin cycle, and leaves room for detergent underneath. The wrong one wobbles, rusts, or buckles under a full drum of wet towels. The short answer: buy by load capacity and lift height first, not by looks.

This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.

Two numbers decide whether a pedestal survives your laundry room: the load rating in pounds and the lift height in inches. This breakdown of washer and dryer risers covers both, plus which frames fit which machine.

Top Picks

I'Ezonk Full Size Heavy Duty Stainless Steel Laundry Pedestal, 6' Height
Best OverallI’Ezonk Stainless Steel Laundry Pedestal 6″4.5+★100+ ratingsA 1200-pound steel frame that holds a full-size machine and a soaked drum of towels steady. Start with the load rating, because it is the one figure that separates a real pedestal from a decorative one.Check price on Amazon
WBD Heavy-Duty All Steel Laundry Pedestal, 12' Height, 1200 lbs
Best for Back ReliefWBD All Steel Laundry Pedestal 12″4.5+★30+ ratingsTwelve inches of lift for anyone whose knees complain every time they bend to the washer.Check price on Amazon

How To Choose The Best Washer and Dryer Risers

A riser is a frame that sits under your appliance and raises it off the floor. That is the whole job. Everything that goes wrong in the laundry room afterwards — a shaking machine, a bent frame, a rusted foot — traces back to one of three numbers you can check before you buy.

Load capacity is the number that keeps you safe

A full drum of wet laundry is heavy. A washer with water in it is heavier still. Load capacity is the maximum weight the frame is rated to hold, measured in pounds. If your machine plus a soaked load pushes past that figure, the frame sags and the feet splay. Buy a rating with room to spare, not a rating that just barely covers the machine.

Lift height decides whether your back notices

Height is measured in inches from the floor to the top of the frame. A taller lift brings the machine door up toward hip level, which means less bending every time you load or unload. A taller lift also opens up space underneath for a basket, a bottle of detergent, or a broom. Shorter lifts keep the machine lower and closer to a countertop.

Adjustable length and width is how it fits your machine

Risers are sold as universal, which means they expand to a range of sizes. The width and depth adjust on sliding steel poles, and the frame locks once it sits snug against your machine’s base. Measure your appliance’s footprint before buying anything, then check the riser’s stated adjustment range against those numbers.

Anti-vibration design keeps the spin cycle quiet

A washer on a high-spin cycle puts real force into whatever it stands on. Rubber pads under the frame absorb that force and protect the floor. Some designs put pads on top as well, so the machine’s own feet grip the platform. Non-slip feet on the frame itself stop the whole assembly from creeping.

Side-by-Side Comparison

Model Best For Load Capacity Height Adjustable Fit Amazon
I’Ezonk Full Size Stainless Steel Laundry Pedestal★ Best Overall Most laundry rooms 1200 lbs 6 in 22″–34″ Amazon
WBD Heavy-Duty All Steel Laundry PedestalBest for Back Relief Back-saving height 1200 lbs 12 in 21″–29″ Amazon
VEVOR Laundry Pedestal Fast setup 1200 lbs 12 in 18.7″–31″ Amazon
Zsytbyyds All Stainless Steel Stand Heavy machines, low profile 1200 lbs 6 in 22″–34-3/8″ Amazon
DTK Washer and Dryer Pedestal with Basket Shelf Built-in laundry storage 800 lbs 23 in 29″ x 29″ Amazon
Nefish Mini Fridge Stand Compact appliances 480 lbs 11″–12″ 19″–27″ Amazon
Kokorona Washing Machine Stand Tight budgets 330 lbs 11″–12.2″ 16.1″–24.8″ Amazon

Detailed Reviews

★ Best Overall

1. I’Ezonk Stainless Steel Laundry Pedestal 6″

Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.

1200 lbs Capacity22″–34″ Adjustable

A 1200-pound steel frame that holds a full-size machine and a soaked drum of towels steady.

Start with the load rating, because it is the one figure that separates a real pedestal from a decorative one. This I’Ezonk frame holds up to 1200 pounds — 3.6 times the 330-pound ceiling of the Kokorona stand further down this list. For a room with a full-size front-loader and a family’s worth of washing, that margin is the whole reason it sits at the top.

The frame extends from 22 inches to 34 inches in length and width, so it opens wide enough for a large-capacity machine and closes down for something smaller. You adjust it by hand, with no tools, and the fit tightens until there is no gap between frame and appliance base. The feet are stainless steel and non-slip, which matters during a high-spin cycle: the assembly stays where you put it instead of creeping toward the wall.

You get a pedestal that goes together with little fuss, and buyers report so: reviews include 14 separate mentions of an easy build alongside 13 for plain functionality. The 6-inch lift (about the height of a stacked paperback) is the honest limit here. It raises the machine enough to stop floor rust, improve airflow, and slide a cleaning cloth underneath, but it will not save your back the way a 12-inch pedestal does. Vibration is the one split opinion: the frame holds steady for plenty of owners, yet a machine that is already unbalanced can still shake on it.

Where this pedestal earns its place

  • 1200-pound rating handles a full-size washer plus a wet load
  • Slides from 22 to 34 inches with no tools, so it hugs the machine base
  • Rust-resistant stainless steel with non-slip feet that stay put
  • Backed by a 2-year free replacement warranty

What to weigh before you buy

  • The 6-inch lift is modest — half the height of the 12-inch VEVOR and WBD frames
  • An already-unbalanced washer can still transmit shake through the platform

Reach for this if: you have a full-size front-loader, want maximum weight margin, and are happy with a low-profile lift that leaves the machine near counter height.

Look elsewhere if: your goal is to stop bending — go for a 12-inch frame instead.

Best for Back Relief

2. WBD All Steel Laundry Pedestal 12″

12 in Lift8 Anti-Vibration Pads

Twelve inches of lift for anyone whose knees complain every time they bend to the washer.

Here is the direct trade against the I’Ezonk above: this WBD frame lifts 12 inches, exactly double that 6-inch figure, and still rates for the same 1200 pounds. If bending is the problem you are solving, that extra half-foot is the purchase. It brings the machine door up toward hip height and opens a storage gap underneath wide enough for detergent bottles, towels, or a basket.

Fit runs 21 to 29 inches in both width and depth, a tighter window than the I’Ezonk’s 22-to-34 spread, so measure your machine’s footprint before committing. Scale markings are printed on the frame to line the poles up, and a lock knob pins the size once it is set. On spin-cycle noise, the design puts four anti-vibration pads on top and four on the bottom — the top set grips the machine’s feet, the bottom set protects the floor from scratches and walking.

The all-steel build and polished white finish suit a bright laundry room. What you give up for the height is a year of warranty cover rather than two, and the narrower fit range costs you flexibility if your machine is on the wide side. It is a straightforward height-first choice for a household where the washer is loaded by someone who would rather not stoop.

Height-first logic: the 12-inch lift is the feature you will feel every single day, and the 1200-pound rating means that height does not come at the cost of strength.

The case for it: a taller, sturdier platform for a standard-size machine, with padding on both faces to quiet the spin.

The catch: it maxes out at 29 inches wide and carries a single year of warranty — check your footprint first.

Easiest to Set Up

3. VEVOR Laundry Pedestal, 12 in, 1200 lbs Capacity

18.7″–31″ Adjustable201 Stainless Steel

A tool kit in the box and a 12-inch lift that reaches from Samsung to Miele.

The widest brand list on this list belongs to the VEVOR. Its frame expands from 18.7 to 31 inches — or 475 to 785 mm — and the maker names Samsung, LG, Whirlpool, GE, Miele, Electrolux and Bosch as fits. If you own an odd-sized machine, that spread is worth more than any cosmetic detail.

Construction is 201 stainless steel, chosen for rust resistance in a damp laundry room, and the rating tops out at 1200 pounds, or 544 kg. At 13.21 pounds the frame itself is substantial — compare that to the 4.2 pounds of the Nefish compact stand further down, and you can feel where the rigidity comes from. Four non-slip rubber pads sit between frame and machine to soak up vibration and hush the high-speed spin.

The 12-inch lift cuts the bend in half compared with a floor-level machine, easing the load on backs and knees. Setup is spelled out as a 5-minute job with the included tool kit and instructions. What you accept in exchange is the tightest adjustment range of the 12-inch frames here — the WBD reaches the same height with a slightly wider 29-inch ceiling.

Why it earns a slot

  • 18.7-to-31-inch range covers the major washer and dryer brands
  • 201 stainless steel construction rated for 1200 pounds
  • Four rubber pads damp vibration during fast spins
  • Tool kit and instructions included for self-assembly

Where it asks patience

  • The 31-inch adjustment ceiling is shy of the 34-inch frames on this page
  • 13.21 pounds makes it the heaviest frame here — a two-person job to shift once loaded

Pick it when: your machine falls inside a common brand footprint and you want the height without paying for a laundry cabinet.

Choose another frame if: your appliance is wider than 31 inches or you need something you can lift alone.

Most Versatile

4. Zsytbyyds Heavy Duty All Stainless Steel Appliance Stand

1200 lbs CapacitySnap-On Assembly

A low, wide steel platform that a washer, a fridge, or a row of plants can all sit on.

Sturdiness is what this stand is known for, and the numbers explain why. The all-steel frame carries a 1200-pound rating, the same figure as the I’Ezonk and WBD, and the frame itself weighs 4.68 kg — versus 2.31 kg for the Kokorona budget stand. That is more than twice the steel in the frame, and you can feel it the moment you set it down.

The adjustment range is the widest of the low-profile group: 22 inches out to 34-3/8 inches in both width and depth, with a 6-inch height. That width sits close to the I’Ezonk’s 34-inch maximum, so both suit a full-size machine — but this frame goes slightly further and handles a refrigerator or portable washer just as easily. Brushed stainless finish, rectangular base, one level.

Assembly is the small surprise. The frame arrives almost fully built, and the connecting rod snaps into place — the maker puts it at a 3-minute one-person job. If the 6-inch lift already suits your room and you want the broadest footprint coverage, this is the most flexible low frame here. The trade-off is the same as any low riser: it protects the machine from floor damp and opens a cleaning gap, but it will not raise the door to hip height.

What stands out: 1200 pounds of capacity across a 34-3/8-inch span, in a frame that snaps together in minutes.

One thing to plan for: at 6 inches tall it is a floor-care and airflow fix, not a back-strain fix.

Worth it for: a laundry room or utility space that needs one sturdy platform for a mix of appliances, not just a washer.

Think twice if: your knees are the reason you are shopping — the 6-inch height will not solve that.

Best Storage Build

5. DTK Washer and Dryer Pedestal

23 in LiftBuilt-In Drain

Half riser, half laundry cabinet — a 23-inch tower with doors on three sides.

This is the only pick on the list that is really furniture. The DTK raises your machine 23 inches — nearly double the 12-inch frames and close to four times the 6-inch ones — and wraps the space underneath in a steel cabinet with a pull-out shelf for laundry baskets. Three side doors give you flexible storage for detergent, dryer sheets, and the odds and ends that usually end up on top of the machine.

Fit is fixed at 29 by 29 inches rather than adjustable, so a standard Samsung, LG, or Whirlpool machine is the target and an oversized one is not. The steel frame is rated for 800 pounds — lower than the 1200-pound frames here, but plenty for a domestic washer and dryer pair. Anti-slip strips keep the machine planted and protect the floor beneath.

There is a practical extra the plain frames do not have: a steel top panel with a built-in drain, so a leak or an overflowing hose drains away instead of pooling under your machine. The drain hose itself is not included, so plan for that. Quality and appearance are what buyers notice most, including the wood-look doors on the cabinet front. The honest tension is that a fixed 29-inch platform leaves no room to adjust, and the cabinet build is heavier to move than a bare frame.

The draw of the cabinet build

  • 23-inch rise takes the bend out of every load
  • Pull-out basket shelf plus three side doors for laundry storage
  • Built-in drain panel helps keep the floor dry
  • Anti-slip strips hold the machine and protect flooring

The realities to weigh

  • Fixed 29 x 29-inch footprint — no adjustability for odd-sized machines
  • 800-pound rating is the lowest of the full-size steel frames here
  • Drain hose is not included

Built for: a laundry room short on storage where a standard 29-inch machine needs lifting well clear of the floor.

Not for: a compact, portable, or oversized appliance that will not sit within a fixed 29-inch square.

Compact Appliance Pick

6. Nefish Mini Fridge Stand, 11″–12″ Height, 480 lbs

19″–27″ AdjustableBuilt-In Corner Levels

The riser for portable washers, small dryers, and the fridge that lives in the garage.

Not every appliance in the house is full-size. This Nefish frame is built for the smaller end of that world — portable washing machines, compact dryers, mini fridges, and the little chest freezer in the corner. It adjusts from 19 to 27 inches in both width and length and lifts the appliance 11 to 12 inches, close enough to the tall frames to spare your back on a compact unit.

The steel frame is rated for 480 pounds, roughly a sixth of the 1200-pound frames here but plenty for a portable machine or a fridge. Its build quality is what buyers praise most, and the stability keeps the appliance clear of the floor where damp and dirt gather. The legs adjust individually, and each corner piece carries a built-in level, so you can level a unit on a floor that is not flat.

Assembly is described as straightforward, with clear instructions in the box. Where opinions split is value — some owners feel the price runs high for a compact frame, though the adjustability and the leveling feature are what you are paying for. The larger non-slip feet and thicker steel tube are the design upgrades that help it hold steady.

Why compact appliances like it: an 11-to-12-inch lift with per-leg leveling, on a frame rated for 480 pounds.

Keep in mind: it is a small-appliance frame — a full-size washer is outside its rating.

Suits you if: you are lifting a portable washer, a compact dryer, or a mini fridge off a damp garage floor.

skip it if: your appliance is a full-size washer — this frame’s 480-pound rating is not built for that.

Budget Champion

7. Kokorona Washing Machine Stand with 4 Strong Feet, 330 lbs

Shock-Absorbing MatsScale-Line Panels

The lightest frame here, and the most affordable way to get a machine off the floor.

Two factors set this Kokorona apart, and both are honest limits. The load rating is 330 pounds, a fraction of the 1200-pound frames at the top of this list, and the frame weighs 2.31 kg. That makes it the lightest steel stand in the group and the easiest to carry home in one hand — but it is not built for a heavy front-loader with a wet load inside.

What it does well is the smaller jobs. The four raised feet adjust from 11 to 12.2 inches tall, and the platform adjusts from 16.1 to 24.8 inches wide, which fits a portable washer, a mini fridge, a freezer, or a small cabinet. The shock-absorbing mats pull double duty: they take the sting out of vibration during a spin and cushion the floor beneath. The foot ends are wrapped in a tough non-slip material to stop the stand sliding.

Setup is the part owners praise. The panels carry clear scale lines so the poles align correctly on the first try, and you can set the size without a single screw. Installation is quoted at three minutes. Treat it as a compact-appliance frame and it does exactly what it promises.

The budget case

  • Quick three-minute setup with scale lines and no screws
  • Shock-absorbing mats reduce vibration and protect the floor
  • 16.1-to-24.8-inch range suits portable washers and small fridges

The honest limits

  • 330-pound rating rules out a full-size washer with a wet load
  • At 2.31 kg it is the lightest frame here — less steel to lean on

Best for: a portable washer or mini fridge in a small space where a full-size frame would be overkill.

Not the one: if your appliance is a full-size washer or dryer, the 330-pound rating puts you outside its working range.

Know the Specs

Load capacity in pounds

Load capacity is the maximum weight a riser’s frame is rated to hold. It covers the appliance plus whatever is inside it, so a wet wash load counts. A 1200-pound frame leaves room for a heavy front-loader and a full drum of towels. A 330-pound frame suits a portable washer or a mini fridge. Match the rating to your heaviest realistic load, not to the machine’s dry weight.

Lift height in inches

Lift height is the gap between the floor and the top of the frame. Taller lifts raise the door toward hip level and cut the bend out of every load. Shorter lifts improve airflow, keep the machine off damp floors, and leave it near counter height. A taller frame also open up more under-machine storage — but check the clearance to any cabinet or shelf above the machine.

Adjustable width and depth

Adjustable frames expand on sliding poles and lock at a set size. The stated range, for example 22 to 34 inches, is the window of machine footprints the frame will fit. Measure the appliance base before buying and check it falls inside that window. Fixed platforms, like a 29-inch square, suit a standard machine but leave no room for an oversized one.

Anti-vibration pads and feet

Rubber pads absorb the force a washer pushes down during a high-spin cycle. Pads on the bottom of the frame protect the floor and stop the stand from creeping. Pads on the top grip the machine’s own feet. Non-slip foot ends add grip on hard flooring. Frames built this way tend to run quieter, and the machine stays where it was set.

Common Questions

Will a universal riser actually fit my Samsung or LG washer?
It depends on the frame’s adjustable range, not on the brand label. Universal stands expand on sliding poles, so measure your machine’s footprint in both width and depth and check it falls inside that range. The VEVOR frame, for example, spans 18.7 to 31 inches and names Samsung, LG, Whirlpool, GE, Miele, Electrolux and Bosch as fits. The DTK platform is fixed at 29 by 29 inches, so it suits a standard footprint only.
How much weight can a riser hold with a full wet load?
Look at the stated load capacity and treat it as a ceiling for the machine plus its contents. Frames on this list range from 330 pounds up to 1200 pounds. A full-size front-loader with a soaked load belongs on a high-rated frame, while a portable washer or mini fridge is fine on a lighter one. When in doubt, choose the higher rating.
Does a 6-inch riser help with back strain or do I need 12 inches?
The height you choose depends on the problem you want to solve. A 6-inch frame lifts the machine clear of a damp floor, improves airflow, and opens a gap for cleaning. A 12-inch frame brings the door up toward hip level and reduces how far you bend to load and unload. If back strain is the reason you are shopping, the taller lift is the one that helps.
Will a riser make my washing machine shake more during the spin cycle?
A well-built frame with anti-vibration pads tends to quiet the machine, not amplify it. Pads on the bottom protect the floor and stop the stand creeping, and pads on top grip the machine’s feet. A machine that is already unbalanced on its own legs can still shake on any platform, so level the appliance before you place it on the riser.
Can I put a washer and dryer both on the same riser?
Only if the frame is rated and sized to carry both. Most risers here are built for a single appliance, with a load rating that reflects that. Stacking a washer and dryer side by side would mean exceeding both the weight rating and the footprint on any of these frames. Use one riser per appliance.
Do risers come with the drain hose for water protection?
Not usually. The DTK pedestal includes a built-in drain panel on its steel top, but the drain hose itself is not included, so you will need to supply one. The plain steel frames do not feature a drain at all — they simply raise the machine clear of the floor to reduce the risk of water sitting beneath it.
How long does it take to assemble a washing machine stand?
Setup time varies by design. The Kokorona stand quotes a three-minute install with no screws, using scale lines on the panels to align the poles. The Zsytbyyds frame arrives almost fully assembled and needs only the connecting rod snapped in. The VEVOR pedestal ships with a tool kit and instructions for a self-assembly job.
Can a riser be used for a mini fridge instead of a washer?
Yes. Several stands here are sold as multi-functional bases. The Kokorona and Nefish frames are designed around compact appliances like mini fridges, freezers, and portable washers. The Nefish adds built-in levels at each corner, which helps on an uneven floor. Just check the footprint and the weight rating before you commit.
What is the tallest riser on this list, and is a tall one safe?
The DTK is the tallest at 23 inches, followed by the 12-inch VEVOR, WBD, and Nefish frames. A tall riser is stable when the frame is rated for the load and the platform is level. The DTK pairs its 23-inch height with an 800-pound rating, so a standard domestic machine sits well within its limits. Check clearance above the machine before choosing a tall frame.
Do risers protect my floor from rust and water damage?
That is one of their main jobs. Raising the machine keeps its base off a floor that may be damp, which helps prevent rust on the appliance’s own feet. The I’Ezonk and Zsytbyyds frames use rust-resistant stainless steel for the frame and feet. The DTK goes further with a drain panel that channels water away, though you supply the hose.

The Bottom Line

For most laundry rooms, the I’Ezonk Full Size Pedestal is the strongest all-round pick. It carries a 1200-pound rating on a 22-to-34-inch adjustable frame, enough for a full-size washer plus a wet load. Owner feedback keeps praising how easy it is to assemble. If your back is the reason you are shopping, the WBD Heavy-Duty Pedestal brings the door up to hip height with the same 1200-pound rating and pads on both faces. For a laundry room starved of storage, the DTK Pedestal turns 23 inches of empty air into a basket shelf and a small cabinet. And if you are lifting a portable washer or a mini fridge, the Kokorona stand does the job for the least outlay. Measure your machine’s footprint and note if you want a low lift or a back-saving one, then match that to the load rating — that is the whole decision.

How we choose

We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.

Sources

Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.

As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.

Scroll to Top