Miracast is a wireless display standard that lets a compatible Windows PC mirror or extend its screen to a compatible TV, projector, or monitor without a cable.
Windows finds the receiver through the Windows + K Cast panel, and the receiving display must support Miracast or be paired with a dongle plugged into HDMI. The connection rides a peer-to-peer Wi-Fi link, so both devices do not need to sit on the same home network. What you actually see — resolution, smoothness, how far the signal reaches — depends on the wireless card, graphics driver, and firmware on the receiving end. Microsoft’s own documentation pins down no universal numbers for any of it.
How Does Miracast Work on Windows?
Miracast builds a direct wireless link between the sending PC and the receiving screen, then streams the display image across it. On a compatible Windows 10 or Windows 11 machine, press Windows + K and pick the target from the list that appears. Windows 10 users can also select Start, search for Connect, and open the Connect app to start or check support.
Microsoft lists Settings > System > Display > Connect to a wireless display as an alternate route on supported systems. If the PC has no Miracast support, Windows may tell you an external display needs a cable — that message is the machine reporting a hardware or driver limitation, not a settings mistake.
Two requirements decide whether the handshake completes. Wi-Fi must be switched on for the sending PC, and the receiver must have Miracast enabled — the menu for that varies by manufacturer. A Miracast connection can fail even when normal Wi-Fi networking works fine, because the wireless adapter, graphics hardware, or display driver simply lacks compatible support.
A Windows PC can also act as the receiver. That setup is covered further down, since it needs an optional feature most people have never installed.
What Do You Need to Project to a TV or Projector?
The short version: a Miracast-capable display, or an adapter that adds the capability through HDMI. Turn the TV or projector on first. If you are using a dongle, plug it into HDMI, connect its USB power, and switch the display to the correct HDMI input. Then press Windows + K, choose the display from the available-device list, and follow any on-screen prompts.
Microsoft sells its own adapters for this job. The Microsoft 4K Wireless Display Adapter works with Surface devices, other Miracast-enabled Windows 10 and Windows 11 PCs, and Android devices. The older Microsoft Wireless Display Adapter models cover Surface devices plus Miracast-enabled Windows 10 and Windows 8.1 machines. Microsoft notes that full functionality is unavailable with non-HDCP devices on those older adapter models.
Power is the detail that trips people up. The adapter needs HDMI for video and USB for power. Microsoft recommends an HDMI port plus a USB charging port, and if the display has no USB power, a standard USB Type-A charger rated 5 W (5 V/1 A) does the job.
If you are shopping for one of these dongles, this roundup of tested Windows wireless display adapters compares the options worth considering before you buy.
| Setup | What You Need | Where to Start |
|---|---|---|
| PC to Miracast TV | TV with Miracast enabled | Windows + K |
| PC to non-Miracast TV | Miracast adapter in HDMI plus USB power | Windows + K after selecting the HDMI input |
| PC to projector | Projector with Miracast, or an adapter | Windows + K |
| PC to another Windows PC | Wireless Display optional feature and app on the receiver | Windows + K on the sender |
| Windows 10 support check | Connect app | Start > search Connect |
| Alternate display route | Supported Windows system | Settings > System > Display |
| Older Windows receiver | Connect app instead of Wireless Display | Projecting to this PC |
How Do You Project to Another Windows PC?
The receiving PC needs the Wireless Display optional feature installed and the Wireless Display app running. On that PC, open Start > Settings > System > Projecting to this PC. Under the “Wireless Display” optional feature heading, select Optional features, choose View features, search for Wireless Display, then pick it and hit Next > Install.
Return to Projecting to this PC and set the discovery and projection permissions the way you want them. Launch the Wireless Display app. On the sending PC, press Windows + K and select the receiving machine.
Version matters here. The Wireless Display app runs on devices with Windows 11, version 22H2 and later. Earlier Windows versions use the Connect app instead. A receiver that is not discoverable under Projecting to this PC will not show up on the sender, so check those permissions before assuming the connection is broken.
Two things Miracast is not. It is not WiGig — Microsoft documents WiGig docks separately, and a compatible PC exposes WiGig under Settings > Network & Internet > Airplane mode. And it is not a paid Windows plan or a streaming service; Microsoft’s documentation identifies no subscription tied to it. Driver and firmware updates are the first fix for most failed connections, on both the PC and the display or adapter.
Common Questions
Does Miracast need both devices on the same Wi-Fi network?
No. Miracast uses a direct peer-to-peer wireless link rather than routing traffic through your home router. Both devices still need Wi-Fi radios that support the standard, but they do not have to share a network. That is why Miracast can work in a conference room where you have no network credentials at all.
Why does Windows say I need a cable instead of a wireless display?
That message means Windows did not detect Miracast support on the PC or found no compatible receiver. Check that Wi-Fi is switched on, that the display has Miracast enabled, and that your wireless and graphics drivers are current. If the hardware genuinely lacks support, a Miracast adapter connected through HDMI is the workaround.
Is 4K guaranteed over a Miracast connection?
No. Microsoft documents 4K video limitations in Miracast sessions on older Windows versions including Windows 8.1 and Windows Server 2012 R2, and the support documentation does not establish universal 4K capability on current hardware. Resolution, refresh rate, range, and latency all vary by PC, receiver, adapter, and content-protection requirements, so verify the specifics for your exact combination.
Sources
- Microsoft Support. “Screen mirroring and projecting to your PC or wireless display” Source for Windows + K steps, the Projecting to this PC setup, and Wireless Display app version requirements.
- Microsoft Support. “Fix connections to wireless displays or docks in Windows” Covers troubleshooting for failed wireless display connections and driver checks.
- Microsoft Support. “Use the Microsoft Wireless Display Adapter” Details adapter models, HDMI plus USB power requirements, and HDCP limitations.