Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A window well cover has one job: keep rain, leaves, and snow out of the pit below your basement window while still letting daylight in. The problem is that most cheap covers are thin plastic that yellows, sags, or cracks within a season or two. So what actually matters here is the polycarbonate thickness, how the cover is braced underneath, and whether it seals against water running down your foundation wall. This guide breaks down seven covers that hold up, explains what each one is genuinely good at, and tells you which one fits your well.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
The choices below span sloped semicircle profiles, flat panels, and a two-pack for double wells. Fit and material grade decide almost everything with a window well cover, so measure your well opening before you order anything.
Top Picks


How To Choose The Best Window Well Cover
You’re usually buying a cover for one of two reasons: the old one cracked and dropped plastic shards into the well, or the open well keeps catching leaves and rainwater that seeps toward the basement window. Either way, four things decide your purchase — the material, the shape, the size, and how it mounts.
Material grade beats marketing language
Pick polycarbonate — it bends before it shatters, unlike acrylic or thin vinyl sheeting. The panels here run about 4.5 mm to 5 mm thick, and that thickness is what lets a cover shrug off a fallen branch instead of spider-cracking. A UV-resistant coating (a clear finish that blocks sun damage) on top keeps the panel from yellowing, so light still reaches your basement years later.
Sloped versus flat, and getting the size right
A sloped semicircle cover sheds water and snow off the curve instead of pooling on a flat surface. Flat panels are simpler and often cheaper but need a slight pitch or they hold water. Measuring is where most returns happen: you want the length and width of the well opening itself, not the window. The listed sizes here run from 39 inches up to 42 inches long and 16 to 18 inches wide, so match your well before ordering.
The backsplash question
A backsplash is a short upturned lip along the wall side of the cover that stops water and debris from sliding down behind it into the well. Some covers in this list include one, some don’t. If your well sits under a roof line without gutters, that lip is the difference between a dry well and a wet one.
Side-by-Side Comparison
| Model | Best For | Size (L x W) | Material | Weight | Amazon |
|---|---|---|---|---|---|
| Clear Polycarbonate Semi-Circle 39″ x 17″★ Best Overall | Deep wells that take snow load | 17″ L x 39″ W | Polycarbonate + aluminum bracing | — | Amazon |
| Basement/Egress Clear Polycarbonate 39″ x 16″Best Value | Straightforward swap on a standard well | 39″ L x 16″ W | Polycarbonate | 5.19 pounds | Amazon |
| Heavy Duty Clear Plastic Guard 42″ x 17″ | Wells that need the longer panel | 42″ L x 17″ W | Polycarbonate | 5.79 pounds | Amazon |
| Outside Cover with Mounting Clip 41″ x 17″ | Critter-proofing a basement well | 41″ L x 17″ W | UV-resistant polycarbonate | 6.87 pounds | Amazon |
| Clear Basement Cover 39″ x 17″ | Trimming to an odd well size | 39″ X 17″ | Polycarbonate | 6.74 pounds | Amazon |
| 2PCS Polycarbonate Covers 39″ x 18″ | Two wells on one house | 39″ X 18″ | Polycarbonate | 12.42 pounds | Amazon |
| Just Cover It 39″ x 17″ | Fast frameless DIY install | 39″ W x 17″ L | Polycarbonate | — | Amazon |
Detailed Reviews
1. Clear Polycarbonate Window Well Cover 39″ W x 17″ L
Our pick — 4.5+★ from 100+ verified ratings; the strongest balance of quality and price.
The only cover here with a 500-lb load rating, thanks to aluminum bracing under the panel.
If your well sits where a person might step across it or where winter dumps heavy snow, the rating on this cover is the whole story. Rust-free aluminum bracing runs underneath the panel, and the listed load capacity is up to 500 lbs. That means it holds weight instead of bowing the way an unsupported sheet of clear plastic will. For a well beside a walkway or under a snow-shedding roofline, that single number is what keeps you from replacing the cover every few winters.
This one earns its spot on build quality: an aluminum reinforcing bar runs through it, and buyers repeatedly credit that bar for why it feels solid rather than flimsy. It’s a 39″ W x 17″ L sloped semicircle profile, made in the USA, with a UV-resistant coating over the polycarbonate to slow yellowing. The curve sheds rain and debris off the side instead of letting it pool, so your well stays drier. Hardware ships in the box, and owners talk about installation almost as much as the build. Unlike the two-packs further down, this is a single hand-finished panel built for a heavy-duty job.
The catch is the fit. It’s molded to a 39″ W x 17″ L opening, so unusual well sizes won’t seat cleanly, and the fixed profile leaves no room to trim. The other recurring note is cost — a few find it dear for a single cover. Weigh that against the load rating: a cheaper sheet that splits under snow costs more once you buy a second one.
Where It Earns Its Place
- 500-lb load rating backed by aluminum bracing under the panel
- UV-resistant coating fights yellowing and keeps the clear look
- Sloped semicircle sheds rain and snow off the curve
- Made in the USA, hardware included
What To Plan Around
- Fixed 39″ W x 17″ L shape — not trimmable for odd wells
- Single cover, premium-tier pricing
The case for it: A deep well that takes foot traffic or heavy snow is exactly what this panel was built for — the load rating is the reason to pay more.
Think twice if: your well measures outside 39″ by 17″, because the molded curve can’t be cut down to fit.
2. Basement Window Well Covers 39″ L X 16″ W
Entry-level price, straight-forward job: clear a standard well of leaves and rain without overthinking it.
At 5.19 pounds, this is the lightest cover here — noticeably lighter than the 41″ mounting-clip model at 6.87 pounds — so lifting it off to check the window or clean the well is a one-hand job. That makes it the pick for the homeowner who just wants the well closed off without a wrestling match. The panel is crisp polycarbonate, and the UV-resistant treatment is there to keep it from going cloudy and yellow over the seasons.
It measures 39″ L x 16″ W, which means it’s the narrowest of the standard-length covers in this list. That’s the whole measuring job: if your well opening runs 16 inches wide, this drops on and seals. If it’s 17 or 18 wide, you’ll want one of the wider panels. The maker offers over 10 sizes, so there’s likely a match if this exact one is off.
Hardware and instructions come in the box, and installation is the part owners appreciate most — it goes on quickly with no head-scratching. Quality is the other thing that comes up. Worth knowing: the panel is clear polycarbonate, so light still reaches the basement window. The honest limit is that there’s no listed load rating and no aluminum bracing, so treat the cover as debris-and-rain protection rather than a step-on surface.
Bottom line: A light, clear, budget-friendly cover that does the baseline job on a standard 39″ x 16″ well.
The trade-off: no rated load capacity and a narrower 16″ width — measure carefully, because a 17″ well leaves a gap.
Reach for this if: your well is a standard 39″ by 16″ and you want the well covered without spending more than you need to.
Look elsewhere if: the well opening is wider than 16″ or you expect anyone to walk near the panel.
3. Polycarbonate Window Well Covers 42″ L X 17″ W
The longest cover in the lineup at 42 inches — built for wells that stretch past the standard opening.
Length is where this one wins: at 42″ L x 17″ W it’s the longest panel in the group, so it’s the one to reach for when a standard panel leaves a strip of open well. Compare that with the Best Overall at 17 inches long and the budget pick at 39 inches. It also lands at 5.79 pounds, between the lightest 5.19-pound cover and the 6.87-pound clip model, so it’s still easy to lift.
A 1.8-inch backsplash sets this one apart — that’s an upturned lip along the wall edge that blocks water and leaves from slipping down behind the cover into the well. It’s a real advantage if your well sits where runoff gathers. The panel itself is premium crisp polycarbonate, tear-resistant, with a UV-resistant coating to hold off yellowing, so the basement stays bright. Five sets of screws come with it to secure it down.
The honest catch is fit tolerance: the listed product dimensions show 39 x 16 inches while the cover is sold as 42″ L x 17″ W. Measure the well opening yourself rather than assuming — the extra length is wasted if the width isn’t right. This is a solid, well-thought-out panel for the right well, but getting the measurement right is on you.
Why it’s in the mix: the 42″ length and the 1.8″ backsplash together make it the pick for long wells with a runoff problem.
Watch the sizing: confirm your actual well opening, since the longest panel only helps when the width matches too.
Go with it if: your well runs close to 42 inches long and water tends to collect behind the cover.
Not for you if: a standard 39-inch panel already covers your well — the extra length just overhangs.
4. 41″L x 17″W Outside Window Well Covers with Mounting Clip
Clips down tight and keeps the well clear of branches, rain, and the small animals that fall in.
If you’ve ever pulled a drowned squirrel out of a window well, this is the cover that addresses it. It’s built to block outdoor debris — leaves, branches — and small critters from getting in through the basement window. The panel measures 41″ L x 17″ W with a 4.5 mm thickness and a 1-1/2″ backstop, so it seats down over the well with a raised edge along the wall. At 6.87 pounds it is the heaviest of the single covers here, which is what you’d expect from the thicker build.
The mounting hardware is the stand-out: it ships with 5 sets of stainless steel mounting clips meant for repeated install and removal. That matters if you lift the cover to clean the well or check the basement window — the clips let it go back on securely rather than rattling loose. The polycarbonate is UV-resistant and anti-yellowing, and it wipes clean with soap and water.
What people find is that it works as advertised — rain stays out of the well and snow doesn’t get inside. The clear panel keeps the basement bright. One thing to size right: the 41″ length sits between the 39″ budget cover and the 42″ longest panel, so check your well against it rather than assuming a standard fit.
The Strengths
- 5 sets of stainless steel mounting clips for repeated removal and reinstall
- 1-1/2″ backstop and 4.5 mm polycarbonate thickness
- UV-resistant and anti-yellowing, wipes clean with soap and water
- Keeps rain and snow out of the well according to what owners find
The Limits
- Heaviest single cover at 6.87 pounds
- 41″ length won’t suit a 39″ or 42″ opening without overhang or a gap
Made for: anyone whose well collects wildlife and debris and who wants a cover that comes off and goes back on securely.
Pass on it if: your well measures a clean 39″ or 42″ — the 41″ panel leaves a sliver of gap on either side of that.
5. Clear Basement Window Well Covers 39″ X 17″
Made to be trimmed — the pick when your well is a hair off the standard opening.
If your well opening is an odd size, this panel can be cut to fit, which turns a strange opening into a workable job instead of a return. It’s a crisp polycarbonate panel at 39″ X 17″ and 6.74 pounds, UV-coated to resist yellowing and keep the basement bright. The maker offers 14 different sizes, so there’s a good chance an off-size well is covered without trimming at all.
Installation is the thing owners appreciate most here — the panel seats onto most standard wells with minimal effort and a solid, tight hold, and drilling the clamp holes is described as simple. Fit is the next thing that gets praised. Together those two are what this cover is built around: it goes on cleanly and stays put.
The design is clean and modern, which helps if your well faces the street. The catch is subtle: it’s a single 39″ X 17″ panel, so the trim advantage is really for wells just barely off that size. If your well is substantially bigger, size up rather than cutting corners off a small panel.
The appeal: a clear polycarbonate cover you can trim, with 14 sizes available — good for wells that don’t quite match a stock opening.
The reality check: a single 39″ X 17″ panel only stretches so far, so measure before you decide to trim.
Best suited to: an odd-sized well that needs a small trim, or a standard well where a clean, easy install is the priority.
skip it if: your well runs closer to 42 inches — a longer panel will fit better than a trimmed short one.
6. 2PCS Polycarbonate Well Covers 39″ X 18″
Two clear covers in one box — the obvious choice for a house with matching wells on both sides.
Two basement wells? This is the only two-pack in the lineup, and it beats placing two separate orders. The pair weighs 12.42 pounds total — right around 6.2 pounds per cover, in line with the other panels here. Each is crisp polycarbonate with a UV-resistant coating, waterproof and windproof, at 39″ X 18″ per cover. That 18-inch width makes these the widest panels in this list, so they suit wells the 16-inch budget pick would leave short.
Installation needs basic tools — a screwdriver or a drill — and the covers seat into most standard window wells for a secure, tight fit. The maker offers 9 size options, so if 39″ X 18″ isn’t your match there’s likely another. The all-weather build is meant to cover both the wet season and the blowing-debris season without cracking or clouding.
The trade-off is that two covers mean two installs, and a pair is a bigger outlay than a single cover. If you only have one well, you’re paying for a spare. For twin wells, cutting the job in half is the draw.
The draw: two 39″ X 18″ clear polycarbonate covers, UV-resistant and weather-tough, sized for the widest wells in this list.
The catch: it’s a two-pack, so a single-well home pays for a spare it may never use.
Pick it when: your home has two basement wells of matching 39″ X 18″ size and you want them both covered in one order.
Not the one if: you have a single well or a well wider than 18 inches — a single panel suits you better.
7. Just Cover It Basement Window Well Cover 39″ W x 17″ L
Frameless and low-profile, with a backsplash built in and a stated under-15-minute install.
If the look of the cover bothers you, this is the one that disappears. The frameless, low-profile semicircle design blends into the yard instead of sitting on the well like a lid. Underneath it’s high-strength polycarbonate, made in the USA, with hardware included. The length and width run 39″ W x 17″ L, so it drops onto a standard well opening.
The 1-1/2″ built-in backsplash is the functional detail that earns this cover its spot — it adds rigidity to the panel and blocks water and debris from sliding down into the well. A UV-resistant coating keeps the clear look polished over the years rather than yellowing. The maker states an under-15-minute install, with instructions written for a first-timer.
Owners describe the quality and the install as the stand-out, and the frameless look draws compliments — one common refrain is that it’s simply a better sight than the old plastic covers it replaced. The mixed part is value and fit: some find it pricier than expected, and a handful note the fit doesn’t match their well exactly. If your well measures 39″ by 17″, it seats well; if it doesn’t, this fixed panel won’t adapt.
What Works
- Frameless 39″ W x 17″ L semicircle that blends into the yard
- 1-1/2″ built-in backsplash adds rigidity and blocks runoff
- UV-resistant coating slows yellowing
- Made in the USA with hardware included; maker states under-15-minute install
Where It’s Tight
- Fixed 39″ x 17″ panel — no trim room for off-size wells
- Value and exact fit are the mixed pieces for some buyers
Right for: a homeowner with a standard 39″ by 17″ well who wants the cleanest-looking cover and a quick install.
Wrong for: a well that doesn’t match 39″ by 17″ — the frameless panel is fixed and can’t be cut down.
Know the Specs
Polycarbonate thickness and load rating
Thickness — the panels here run around 4.5 mm to 5 mm — decides how much abuse a cover takes before it cracks. Polycarbonate bends rather than shatters, so a slightly thicker sheet survives a fallen branch that would split thinner plastic. A load rating (like the 500 lbs on one cover here) tells you whether the panel is braced well enough to hold weight, so you know if it can be stepped near or not.
Backsplash and UV coating
A backsplash is the short raised lip along the wall side of the cover that stops water and debris running down behind it into the well. A UV-resistant coating is a clear layer on top of the panel that slows the yellowing and clouding sunlight causes over the years, so the cover keeps doing its job of letting light into the basement.
Measuring your well
Measure the well opening itself — the length and width of the top of the well, not the window. Most covers here run from 39 to 42 inches long and 16 to 18 inches wide, and a panel an inch too narrow leaves a gap rain will find. Order the closest match, or a trimmable panel if your well is between sizes.
Mounting clips and installation
Most covers come with hardware — screws, clips, or a mix — and some ship with extra clip sets so you can lift the cover off for cleaning and clamp it back down. Stainless steel clips resist rust better than plain steel, and they hold the panel tight against wind. Install time is usually under an hour with a screwdriver or drill.
Common Questions
Will a window well cover fit if my well isn’t the standard size?
How do I measure a window well for a cover?
Can I stand or walk on a polycarbonate window well cover?
Will a clear cover still let light into the basement?
What does a backsplash on a window well cover do?
How long does a polycarbonate window well cover last?
Do window well covers keep animals out?
Will a window well cover stop rain from leaking into the well?
Do I need a sloped or flat window well cover?
What hardware comes with a window well cover?
The Bottom Line
For most homes, the window well cover worth starting with is the Clear Polycarbonate Semi-Circle 39″ x 17″, because its 500-lb rating and aluminum bracing are the only ones here built for snow load and foot traffic. If your well is a standard opening and you want it closed off without overthinking it, the Basement/Egress 39″ x 16″ does the baseline job at an entry-level price. And if you’re covering twin wells, the 2PCS Polycarbonate covers save you a second order. Measure your well first — fit is the one thing that decides whether any of these works.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.




