Measure foot width by standing on paper, tracing the outline, and measuring straight across the ball of the foot — then read that number beside a brand’s size-and-width chart, since width labels are not universal.
A wide shoe that still pinches usually means the width measurement was taken in the wrong spot. The number itself is simple to get: paper on a hard floor, full weight on the foot, a mark across the widest part. The work is in measuring both feet and then matching the result to the specific brand’s chart instead of guessing from a size label.
How Do You Measure Foot Width At Home?
Nike’s official method uses paper taped to the floor, a pencil, and a ruler, with width taken in centimeters across the widest part of the foot — normally the ball, just behind the toes. Weight goes on the foot while it is traced.
- Tape paper to a hard floor and set the heel against a wall.
- Stand with full weight on the foot and trace the outline, or mark the heel and the longest toe.
- Measure length from the back of the heel to the longest toe.
- Measure width straight across the widest part of the foot.
- Repeat with the other foot, then use the larger length and the larger width.
Skip the arch and the narrow midfoot — those give a falsely small width. A soft surface or loose paper bends underfoot and skews the trace, so the floor has to be hard and the paper taped down.
Why Timing and Stance Change the Number
Measure in the late afternoon, when feet are at their largest from normal swelling, and always while standing rather than seated. New Balance’s sizing guidance flags standing as more accurate because the foot spreads under body weight.
Both feet get measured, every time. Feet routinely differ in length and width, and the larger foot decides the shoe — otherwise the smaller foot’s size leaves the bigger one compressed. Because foot shape shifts over years, New Balance’s printable women’s tool recommends re-measuring annually.
How Do You Read a Foot Width Measurement?
Foot width is not a standalone number — it only means something paired with foot length and the manufacturer’s chart. Nike suggests a ratio as a screening aid: divide width by length, where a 4-inch-wide, 10-inch-long foot gives 0.40. Nike describes roughly 0.39 as average and 0.43 or higher as unusually wide. That ratio is a rough screen, not an industry or medical standard.
New Balance labels US men’s widths Narrow B, Medium D, Wide 2E, and Extra Wide 4E in its printable tool, and its range runs from X-Narrow through XX-Wide — but which widths a given model offers depends on the product. Nike’s charts note that a wide shoe carries about 1/4 inch (6.35 mm) more girth in the toe box than a regular width; the women’s chart puts extra-wide at about 1/2 inch (1.27 cm) more. Those are internal girth differences, not a bigger flat, side-to-side measurement.
| Width Label (US Men’s) | What It Means | Verify Before Buying |
|---|---|---|
| Narrow B | Below medium girth | Often a special order |
| Medium D | Standard width | Stock width in most models |
| Wide 2E | Added toe-box girth | Model-specific availability |
| Extra Wide 4E | Most girth offered | Limited to select models |
| Between two sizes | Ambiguous fit | Nike and New Balance both say go larger |
| Brand chart match | Not transferable between brands | Recheck per brand and per model |
| Printable template | Accuracy depends on print scale | Print at 100%, “fit to page” off |
Brand charts are not interchangeable. A measurement that lands on 2E at one company may not map to another’s wide designation, so the width chart on the individual product page is the one that counts. New Balance’s printable tools only work at 100% scale with “fit to page” disabled — an auto-scaled template throws the measurement off. After the numbers, pressure on the sides or top of the foot signals a wider width may be needed, while excess side space points the other way. Readers who already know their size can compare specific models in this roundup of xx wide shoes tested for fit.
What Do the Common Mistakes Cost?
A larger size is not a fix for a narrow shoe. Extra length leaves dead space in front while the forefoot stays compressed, which is why width and length get measured separately and matched to the correct chart.
- Measuring one foot only — the larger foot then fights the shoe.
- Measuring seated, with no weight on the foot.
- Taking width at the arch or midfoot instead of the ball.
- Using a template printed with automatic scaling.
- Trusting a width number without checking the shoe on a standing foot.
Nike associates pressure along the outside edge of the foot and visible bulging of the upper over the midsole with a likely need for a wide fit. New Balance’s fit check adds the rest: the heel stays secure, the midfoot is snug but not tight, and the toes can move. Try both shoes and fit the larger foot.
Persistent pressure, numbness, tingling, blisters, or pain means the shoe is too narrow or otherwise wrong and should come off. Anyone with diabetes, significant swelling, neuropathy, bunions, or recurring foot pain should get professional footwear or medical advice rather than relying on an online chart. Before ordering, confirm the exact model’s US width options and return policy — “wide” can describe added internal girth rather than a wider outsole.
Sources
- Nike. “How to Measure Foot Size” Source for the paper-and-wall method, the width-to-length ratio, and toe-box girth differences.
- New Balance. “Product Sizing FAQs” Source for US width labels, print-at-100% requirements, and annual re-measuring.
- New Balance. “Size Guide” Source for standing measurements, width range, and shoe fit checks.