Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Your YETI Tundra is never more exposed than when it sits in a truck bed at a trailhead, a boat ramp, or a tailgate lot. What you need is a lock that actually anchors to the cooler’s own molded slot instead of a generic cable wrapped around a handle. This guide covers the seven cooler locks built specifically for that job, sorted by what each one physically does and who it fits.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Every option here mounts to a YETI tie-down slot or lid, so your real choice depends on cable length, lock type, and how much steel you want between a stranger and your ice. Those three details separate a good yeti cooler lock from a locked cooler that still walks away.
Top Picks


How To Choose The Best Yeti Cooler Lock
The mistake most buyers make is buying “a lock” instead of buying the right lock for their cooler. A YETI Tundra has a built-in tie-down slot, and the hardware that snaps into that slot is the only part that truly secures the cooler body. Your job is to match three things: the slot, the cable you plan to run, and how long the cooler sits unattended.
Know which part actually does the work
There are two distinct products in this category. A cable lock is the long chain of braided steel that runs from your cooler to a truck bed tie-down, tree, or trailer rail. A locking bracket is the short stainless piece that bolts or clips into the cooler’s tie-down slot to give that cable something to grab. Some kits include both, and some sell the bracket alone. Read the listing carefully — a bracket with no cable and no padlock will not secure anything by itself.
Cable length is a fit decision, not a spec brag
Longer cable buys you options: you can loop around a fat trailer rail, a truck bed tie-down, or a chunky tree and still have slack to close the lock. Shorter cable keeps the cooler tight against the mounting point, which is what you want when you are threading through a bracket and a handle. If your cooler travels inside a truck bed, a shorter run to the anchor point is easier to keep taut.
Cooler size and model year drive compatibility
This is where most returns happen. Lid-mounted locks are cut for specific Tundra sizes — 35, 45, and 65qt are the ones commonly listed. Lid hardware also depends on where the hinge and handle sit on your exact model. An occasional fit mismatch is the price of a tight, dedicated design, so confirm your model number before you buy anything that clamps over the lid.
Side-by-Side Comparison
| Model | Best For | Lock Style | Cable Length | Weight | Amazon |
|---|---|---|---|---|---|
| YETI Security Cable Lock and Bracket for Tundra Coolers★ Best Overall | All-in-one truck bed security | Braided steel cable + bracket | 6 ft | 1.2 lb | Amazon |
| 2-Pack Cooler Lock BracketTwo-Cooler Value | Two coolers, one budget kit | Bracket + retractable cable + combo lock | Retractable | 11.2 oz | Amazon |
| YETI Locking Bracket for Tundra Coolers | Adding a lock you already own | Stainless bracket only | — | — | Amazon |
| CodyCo Aluminum Security Overbend Lock Bracket | Lightweight camp and tailgate runs | Aluminum bracket + cable lock | 3 ft | 6.4 oz | Amazon |
| Ice Chest/Cooler Security Lock Bracket by Siberian Coolers | Generic tie-down slot fit | Steel bracket only | — | — | Amazon |
| DENY Cooler Security Lid Lock | Locking the lid itself | Stainless lid lock, key | — | — | Amazon |
| DENY Security Cooler Lock System | Mounting a cooler permanently | IronFist base + StiffArm bar | — | 13 oz | Amazon |
Detailed Reviews
1. YETI Security Cable Lock and Bracket for Tundra Coolers
Our pick — 4.5+★ from 750+ verified ratings; the strongest balance of quality and price.
The one lock here that is built by the cooler maker, for the cooler you own.
This is the only pick in the list where the company that molded the tie-down slot also makes the bracket that drops into it. The stainless bracket is shaped for YETI’s integrated tie-down slot, so it seats flush instead of rattling around in a generic hole. From there you have a 6 ft braided steel cable to work with, which gives you room to loop a trailer rail or a truck bed tie-down and still close the lock comfortably.
The cable itself is 5/16 in thick braided steel, and that thickness is why it threads through the bracket hole without needing a separate shackle. A 5/16 in braid takes real cutting effort, unlike a thin chain. The lock is fully adjustable along the cable, so you can snug the cooler tight to the anchor point and leave no slack to work with. The cable weighs 13.5 oz and the bracket weighs 4.5 oz.
What wins people over is the security itself: 4.5+ stars from 700+ owners, the highest rating in this roundup. Trucks, trailers, and boat decks are where it gets used, and the reports consistently land on the same point: the cooler is still there when they come back. The honest catch is the learning curve on threading and adjustment. Ease of use draws mixed feedback, and a few people find the first setup fiddly until they see how the locking collar tightens. It fits all YETI Tundra and Roadie Coolers, so older and smaller boxes are covered too.
Why This Holds The Top Spot
- Made by YETI for the exact tie-down slot on Tundra and Roadie models
- 6 ft of 5/16 in braided steel cable — long enough for a truck bed anchor
- Adjustable lock position lets you pull the cooler tight with no slack
- Rust-resistant, vinyl-coated finish for marine and salt-air use
Where It Asks More Of You
- The first setup takes some figuring out — threading and tensioning are not obvious
- You are paying for the YETI name on a small piece of hardware
Straight answer: If your Tundra or Roadie rides in a truck bed or on a trailer, this is the lowest-risk way to lock it down.
The trade-off: Budget a few minutes on the first install to learn the tensioning collar.
2. 2-Pack Cooler Lock Bracket
Two full bracket kits for one cooler’s worth of money — if it fits your box.
Here is one of the most compact hardware options in the group. The bracket measures 1.2 x 0.98 x 3.9 inches; the YETI cable lock package measures 10 x 1.4 x 5 inches. That small footprint is the point: it tucks against a cooler handle instead of hanging off the side, and the semi-enclosed shape grips that handle tightly so the bracket does not slide around in transit.
You get two of everything — two brackets, a 304 stainless turnbuckle, a retractable cable, and a 3-digit combination lock with 1,000-plus code combinations. The turnbuckle is the clever bit. It threads to tighten the cable, which pulls the cooler against the anchor and stops it shifting on a bumpy drive. The combination dial means no key to lose in the truck, and you can reset the code whenever you want. Setup is tool-free, and the 11.2 oz total weight keeps it out of the way.
Compatibility is the thing to check hardest. Buyers who run it on the coolers it targets report it works exactly as intended, and the build quality earns steady praise. But RTIC is a real sticking point — the bracket is listed for Yeti and RTIC Hopper and Tundra series, and yet fit complaints surface specifically on the RTIC side. If your cooler says RTIC on it, measure the handle before you commit. Yeti owners are on far safer ground.
The double-kit math: Two brackets for two coolers is genuinely useful for a family with a Tundra and a Hopper — you are not buying the same kit twice.
Check before you click: Measure your cooler handle. The semi-enclosed grip is the feature that makes this work, and it is also the reason a mismatched handle will not seat.
Worth it when: You own a Yeti or a Hopper and you want a keyless, low-profile setup for two boxes.
Hold off when: Your cooler is an RTIC hard model — that is where the fit reports go sideways.
3. YETI Locking Bracket for Tundra Coolers
The plain stainless anchor for anyone who already owns a good padlock.
Skip the bundled kits entirely if you have a lock and chain sitting in the garage. This single stainless bracket drops into the Tundra’s tie-down slot and gives you a solid loop to pass whatever you already own through — padlock, chain, or cable. It stands 4 1/8 in tall and 1 in wide, so it clears the slot and leaves a real hole to work with rather than a token tab.
The build is the story, and it is why this one lands so well with the people who buy it. Buyers talk about the quality of the stainless first and the way it functions second, and the fit draws the same steady approval. It is meant for strapping a Tundra into a truck bed or a trailer, and it does that without any moving parts to wear out. There is no cable, no lock, no code to remember — just the anchor point.
The value question is the one honest wrinkle. You are paying YETI-brand money for a single piece of formed steel that does one thing, and value feedback on this bracket is genuinely split. It makes the most sense as a replacement for a lost bracket or as the one piece you know will seat properly. If you are starting from nothing, the all-in cable lock above bundles this exact bracket idea with the cable you still need.
What It Gets Right
- Drops straight into the Tundra tie-down slot — no adapters
- Stainless steel with no moving parts to fail
- Works with any padlock, chain, or cable you already have
What You Should Know
- No lock and no chain included — read the listing twice
- The price is steep for one formed piece of steel
Pick this if: You already have a lock and cable and just need the YETI-made anchor.
Look past it if: You are buying your first lock setup — you would still need to add a cable and padlock.
4. CodyCo Aluminum Security Overbend Cooler Lock Bracket
Aluminum body and a short leash — made to travel, not to stay put.
At 6.4 oz this is the lightest complete setup in the roundup, and it sits alongside the 2-Pack kit as the two genuinely compact options. The bracket is cut from 1/8 in marine-grade aluminum, which resists rust and corrosion when it lives near saltwater or a wet boat deck. The cable runs 3 ft — the shortest complete kit here — which keeps the cooler tucked close to the anchor rather than swinging loose.
Short cable is a deliberate choice, not a limitation. If you are locking through a bracket and a handle, 3 ft is plenty and there is less line to work slack into. The overbend design wraps the cooler’s edge, and installation is quick enough that you are not fighting it at the ramp. It is listed for both Yeti Tundra and RTIC hard coolers, so it covers the two big names.
The catch is a simple one: aluminum is lighter than steel, and light is the trade. It resists the elements beautifully, but a 1/8 in aluminum bracket is not the same blunt deterrent as the stainless pieces in this list. Quality and functionality are what buyers consistently come back to on this one — it does what it says and the hardware holds up. Think of it as the camp and tailgate bracket, not the leave-it-in-a-public-lot bracket.
Best use case: Toss it in the truck for weekend camping and tailgates where you want light hardware that still locks the cooler down.
Where it gives ground: Against the stainless picks, the aluminum construction is a softer target for a determined thief.
Suits you if: You want a compact, corrosion-resistant kit that packs away with the rest of your camp gear.
Think twice if: Your cooler sits in a high-traffic public spot — go stainless for that.
5. Ice Chest/Cooler Security Lock Bracket by Siberian Coolers
A chunk of 7-gauge steel with a lifetime warranty and a forgiving slot fit.
Start with the number that matters: 1 1/4 in wide by 3/16 in thick, which is 7-gauge steel. That is a serious slab of metal for a bracket this small, and it is why buyers keep coming back to how sturdy it feels. It is built to slot into the tie-down recess that many coolers share, so it is not locked to the YETI ecosystem — the listing covers Yeti and a range of other coolers with that style of slot.
The lifetime warranty is unusual in a category where most of these are unbranded hardware. That backing, plus the raw steel, is what earns the durability and value praise this bracket gets. There is no cable and no lock in the box, same as the YETI bracket — this is the anchor only, and you supply the lock.
Fit is the honest asterisk here, and it is the most-discussed part of this bracket by a distance. Plenty of buyers report it drops right into a Yeti slot and works exactly as needed, while others find it does not align cleanly on their box. That is not a defect so much as the nature of a universal bracket — tolerances vary cooler to cooler. If yours is a non-YETI brand with a tie-down slot, this is one of the few options that even claims to cover you.
Why The Steel Wins Fans
- 7-gauge steel at 3/16 in thick — heavier stock than most brackets here
- Lifetime warranty backs the hardware
- Fits a broad range of coolers, not just the YETI slot
Before You Order
- Alignment varies by cooler — some slots take it easily, others fight it
- Bracket only; no cable, chain, or lock in the box
The right call for: A non-YETI cooler with a tie-down slot that needs a heavy steel anchor and a real warranty behind it.
Test-fit first: Dry-fit the bracket in your slot before you plan a trip around it.
6. DENY Cooler Security Lid Lock Fits YETI Tundra 35, 45, 65qt
Locks the lid shut so nobody helps themselves to what is inside.
This solves a different problem than the cables and brackets. Where those stop the whole cooler from walking off, this locks the lid down — which is what you want when the cooler is staying put but the contents are the prize. Everything DENY makes here is 304 stainless steel, and it is purpose-built for the Tundra 35, 45, and 65qt only. The lock is a key type, and a key is included.
Slow down and read carefully on fit. Compatibility draws split feedback: the lid lock works well for plenty of Tundra owners, yet a real share of owners mention it does not work on the 45 model and that the fit is off on their box. That is a fit mismatch, not a build failure — the construction itself is consistently called well-constructed. If you own a Tundra 45, measure and double-check against your specific model year before committing.
Value is the second honest note. This is priced like a premium accessory, and the feedback on whether it is money well spent genuinely divides — some call it worth it, others feel stung. The 304 stainless lid piece is what you are paying for, and it is built to outlast the cooler. It is the right tool if theft of contents is your worry. It is the wrong tool if your worry is the whole cooler disappearing.
The real job it does: Stops a bystander from flipping the lid open and lifting your food and drinks while the cooler sits at a campsite.
The honest risk: The 45qt fit reports are too common to ignore — verify your exact model before you rely on this.
Buy it for: Tundra 35 or 65qt owners who want the lid locked on a cooler that stays in place.
Measure twice for: A Tundra 45, where the fit feedback is the least settled.
7. DENY Security Cooler Lock System
Bolts the cooler to the vehicle so it cannot leave without the truck.
This is the heaviest-duty approach in the roundup, and it works differently from everything else. Instead of a cable you loop, you get an IronFist lock base and a StiffArm-13 lock bar, plus the hardware to mount the whole thing to a truck bed, SUV, UTV, or side-by-side. The cooler then sits locked to that mount. It fits Tundra 35, 45, and 65qt models and carries 13 oz of stainless hardware.
The all-stainless construction is why durability is the most consistent praise in its reviews. For overlanding, hunting, and off-road use where the cooler rides on the rig full time, a fixed mount is more secure than a cable because there is no line to cut. You unbolt it or you do not take it.
The plain catch is cost. Price is the most consistent complaint about this system, and the value feedback skews negative for that reason. It is a real investment, and it only earns that outlay if your cooler is staying mounted to a vehicle long-term. If you move the cooler from truck to boat to camp, a cable kit above suits you better. If it lives bolted in an overland rig, this is the most thorough answer here.
Where it earns its place: Overland, hunting, and side-by-side setups where the cooler is semi-permanent rig equipment.
The cost reality: It is the priciest pick by a wide margin, and the value feedback reflects that.
Made for: Overlanders and hunters who want the cooler bolted to the vehicle, not chained to it.
Not for: Anyone who hauls the cooler between vehicles — the fixed mounting hardware works against that.
Know the Specs
Cable Length and Diameter
Length decides where you can anchor. A long braided cable, like the 6 ft run on the YETI kit, reaches around a trailer rail or a fat tree and still closes. A short 3 ft cable keeps the cooler tight to the anchor and leaves less slack for a thief to work with. Diameter is the cut-resistance side. The 5/16 in braid on the YETI cable is thick enough to make cutting a chore. A thinner cable is easier to travel with but easier to get through. Match the length to your anchor point, then accept the diameter that comes with it.
Bracket Material and Gauge
The bracket is what the thief actually has to beat, so material matters more than most buyers think. Stainless steel like the 304 grade on the 2-Pack kit and the DENY pieces resists moisture and salt spray. Marine-grade aluminum like CodyCo’s 1/8 in plate is lighter and still corrosion-resistant, but a softer target. Thickness — called gauge — tells you how much metal is there. The Siberian bracket at 3/16 in of 7-gauge steel is heavy stock; a thin stamped tab is not. Heavier steel is harder to bend or cut, and it is why the steel brackets feel more serious in the hand.
Common Questions
Will a YETI cooler lock fit my Roadie as well as my Tundra?
Does a cooler lock come with the padlock and cable included?
Can I use a regular padlock with a YETI locking bracket?
Which cooler lock is hardest to cut through?
Will the DENY lid lock work on a Tundra 45?
Is a cable lock or a fixed mount more secure for a truck bed?
How do I know which bracket fits my cooler’s tie-down slot?
Is a key lock or a combination lock better for a cooler?
Can I lock two coolers with one cooler lock kit?
Does a stainless bracket rust if I keep the cooler on a boat?
The Bottom Line
For most owners, the yeti cooler lock to buy is the YETI Security Cable Lock and Bracket for Tundra Coolers, because it is the only pick built by the cooler maker for its own tie-down slot and it pairs a 6 ft braided steel cable with a 5/16 in cut-resistant braid. If you want a compact keyless setup across two coolers, grab the 2-Pack Cooler Lock Bracket with Retractable Cable & Turnbuckle. And for locking the lid of a Tundra that stays in place, the DENY Cooler Security Lid Lock is the one to reach for. The YETI kit’s 4.5+ stars from 700+ owners is the highest rating in this roundup.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.



