A YETI Tundra hard cooler gets secured by sliding a stainless locking bracket into the cooler’s AnchorPoint tie-down slot and locking a chain, cable, or padlock through the bracket’s opening.
The job takes about a minute: no drilling, no hardware kit, no special tool — the slots are molded into the shell and the bracket drops straight in. The common mistake is buying the wrong accessory, since YETI sells two locking products and one ships without a lock or chain.
Which YETI Locking Accessory Do You Need?
Pick the bracket alone if you already own a heavy chain, hardened padlock, or trusted cable; pick the bundle for one box that covers everything, especially for a truck bed or boat where reach matters as much as security.
Both fit the AnchorPoint tie-down slots on Tundra hard coolers. Neither is designed for YETI soft coolers, LoadOut boxes, or drinkware, which have no AnchorPoint slots. For cable, chain, and shackle-based padlock setups, this breakdown of the best YETI cooler lock options compares real-world picks side by side.
How to Install a YETI Cooler Lock
- Confirm AnchorPoint slots. Look along the molded channels on the Tundra’s sides and lid area. YETI lists Tundra Hard Coolers as the compatible line, so soft coolers and Roadie-style bodies won’t accept the bracket.
- Slide the bracket into a slot.
- Route your security device through the bracket’s opening. Thread a chain, cable, or padlock shackle through the exposed loop; the bracket accepts a range of hardware rather than one proprietary lock.
- Anchor the other end to something immovable. Wrap the cable or chain around a truck-bed tie point, trailer frame member, boat fitting, or fixed post, then close the lock. A lock attached only to the cooler protects nothing.
Try to wiggle it out with the padlock engaged — if it slides loose, it is not seated.
What a YETI Cooler Lock Costs and Fits
| Item | US Price | What You Get |
|---|---|---|
| YETI Locking Bracket | $13.00 | Stainless bracket only, 3.9 in × 1.1 in; no lock or chain included |
| YETI Security Cable Lock & Bracket | $35.00 | Six-foot adjustable cable, lock, and stainless bracket |
| Tundra 35 Hard Cooler | $295.00 | AnchorPoint slots, five-year warranty |
| Tundra 45 Hard Cooler | $350.00 | AnchorPoint slots, five-year warranty |
| Tundra 65 Hard Cooler | $395.00 | AnchorPoint slots, five-year warranty |
| Tundra 75 Hard Cooler | $475.00 | AnchorPoint slots, five-year warranty |
| Tundra 105 / 110 / 125 | $525–$625 | Larger Tundra bodies, same AnchorPoint slot system |
YETI publishes no required shackle diameter, cable thickness, or torque spec, so check clearance yourself — a shackle that is too thick will not pass through the loop. The locking bracket product page lists dimensions but stops short of a lock-size recommendation.
Where The Lock Falls Short — And The Bear-Resistant Caveat
A cooler lock stops casual theft and the curious bear, but it is not a guarantee: the bracket secures the lid and body to an anchor point and does nothing to make an unattended truck bed, boat, or campsite tamper-proof. Inspect the cable, bracket, padlock, and cooler slots before each trip and replace worn hardware.
Separately, YETI’s Tundra owner’s manual identifies a dedicated Cooler Lock built specifically for Tundra models; when engaged, YETI states the cooler is certified as a bear-resistant container. The Tundra owner’s manual covers that accessory and the locking provisions.
For day-to-day theft deterrence rather than wildlife compliance, the $35 cable bundle handles most situations; the bracket alone makes sense only when you already own better hardware than what comes in the box.
Common Questions
Does the YETI locking bracket come with a lock?
No. The $13 YETI Locking Bracket ships as a single stainless-steel piece with no padlock, chain, or cable in the box. You supply the security hardware yourself, which is why the $35 Security Cable Lock & Bracket bundle exists for buyers who want everything in one purchase.
Will the bracket fit a YETI soft cooler?
No. YETI lists the locking bracket and cable lock for Tundra Hard Coolers, which carry the molded AnchorPoint tie-down slots. Soft coolers, LoadOut boxes, and drinkware do not have those slots, so the bracket has nothing to seat into and should not be purchased for them.
Can I lock the cooler to a truck bed?
Yes, and that is the most common use. Seat the bracket in an AnchorPoint slot, run the cable or chain through a truck-bed tie-down or trailer frame member, then close the lock. The cooler is only as secure as the anchor point you chose, so pick something welded or bolted down.
Sources
- YETI. “Locking Bracket / Security Cable Lock & Bracket.” Lists the two locking accessories, their prices, and Tundra compatibility.
- YETI. “Tundra Owner’s Manual.” Covers the Tundra-only Cooler Lock accessory, bear-resistance certification, and IGBC approval with Master Lock padlocks.