Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
A work bench table is really three purchases in one: a flat surface you can hammer on, a frame that refuses to wobble when you push a plane or crank a vise, and enough power and storage within arm’s reach so you stop walking to the wall outlet. Miss on any of those three and you’ve bought a shelf, not a bench. So the question worth answering first is simple — what actually separates a bench you’ll keep for a decade from one that rattles on day two? Rank benches by load rating (how much weight the bench holds), then top thickness, then frame bracing (the cross-pieces that stop the frame twisting). Height stops, pegboards, and outlets are secondary to those three.
This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
Below you’ll find eleven benches sorted by what they’re genuinely good at — heavy load, wide surface, built-in power, or rolling mobility. Every claim traces back to the maker’s own spec sheet. If you want the short version: the work bench table that fits most garages is a solid-wood top on a braced steel frame with locking casters.
Top Picks
How To Choose A Work Bench Table
Start with the job you actually do, not the number on the box. A bench used for sanding and assembly has different demands than one that holds a bench grinder, a vise, or a 25-gallon aquarium. Match the bench to the heaviest single thing that will sit on it, then add margin for the downward push of a hammer or a clamp.
Load capacity: read it as a ceiling, not a target
Capacity is the maximum weight the frame and top are rated to hold, usually spread evenly across the surface. The spread matters — a 2,000 lb rating assumes the load is distributed, not concentrated on one corner. For general garage work, 1,500 to 2,000 lbs covers almost anything you’ll do. If you’re parking an engine block or a heavy welding fixture, the higher-rated frames earn their keep.
Top material and thickness
A 1-inch solid wood or rubberwood top gives you something to clamp onto and absorbs impact without denting. Thicker engineered tops look substantial but can chip at the edges over time. Solid wood also lets you sand and refinish the surface years down the line, which an engineered top won’t allow.
Height adjustment: how much range do you really need?
Benches here adjust anywhere from a low of 25.9 inches to a high of 43.4 inches, and the number of preset stops ranges from 3 up to 11. If two people of different heights share the bench, more stops and a wider range matter. If it’s just you at one task, three settings is plenty.
Power and storage built into the bench
A built-in power strip — typically 4 AC outlets (standard wall sockets) plus 2 USB ports on a cord between 6.5 and 10 feet — removes the extension cord from your floor, so you can run a drill and charge a phone without tripping over a cable. Pegboards with hooks keep tools off the work surface, and drawers or a lower shelf hold the bulky items. Decide if you want that storage on the bench or on the wall behind it.
Side-by-Side Comparison
| Model | Best For | Load Capacity | Top Size | Height Range | Amazon |
|---|---|---|---|---|---|
| Seville Classics UltraGraphite★ Best Overall | Rolling all-rounder | 500 lbs | 24″D x 48″W | — | Amazon |
| MUWOOD 48″ AdjustableBudget Starter | Tight-budget starter bench | 2,000 lbs | 24″D x 48″W | 28″ to 40″ | Amazon |
| VEVOR 48 x 20 AdjustableBest for Power | Power at the surface | 2,000 lbs | 20″D x 48″W | 28.5″ to 38.3″ | Amazon |
| Northsky 48″ with Wheels | Storage-heavy garage | 2,200 lbs | 23.6″D x 48″W | 27.9″ to 43.4″ | Amazon |
| CAMMOO 60″ Adjustable | Long two-station surface | 2,000 lbs | 22″D x 60″W | 28.5″ to 39″ | Amazon |
| VekMax 48″ with Power Strip | Low-sitting work | 2,000 lbs | 23.7″D x 47.3″W | 25.9″ to 38″ | Amazon |
| WORKPRO 48″ Adjustable | Certified wood, modest load | 1,500 lbs | 22″D x 48″W | 30.5″ to 39.4″ | Amazon |
| HABUTWAY 60″ Height Adjustable | Wide flat multipurpose top | 2,000 lbs | 22″D x 60″W | 29.5″ to 38.4″ | Amazon |
| Maemttes 60″ with Drawers | Tool storage and mobility | 3,000 lbs | 59″D x 23.6″W | — | Amazon |
| Granper 70″ Solid Wood | Largest top, heaviest rating | 3,000 lbs | 70″W | Multiple settings | Amazon |
| VEVOR 72″ Oak Top | Extreme-load workshop | 5,000 lbs | 24″D x 72″W | 29.1″ to 39″ | Amazon |
Detailed Reviews
1. Seville Classics UltraGraphite Wood Top Workbench on Wheels
Our pick — 4.5+★ from 850+ verified ratings; the strongest balance of quality and price.
The bench that rolls where you need it, then plants itself when you lock the wheels.
The first thing you notice on paper is the top: a full 1-inch slab of solid wood, finished in scratch-resistant polyurethane. That’s a surface you can clamp a vise to, drop a hammer on, and sand back into shape in five years. Underneath sits an alloy steel frame in a graphite powder coat, and it rolls on four 3-inch casters — two of which lock, so the bench becomes stationary the moment you set the brake.
Capacity is 500 pounds. That’s the honest ceiling, and it’s worth reading as a ceiling. Buy this one if your work is assembly, electronics, model building, or a home office bench you also use for repairs. If you plan to park a small-block engine or do heavy welding on it, the 2,000 lb and 5,000 lb frames further down this list are the right call instead.
The organizer drawer is the detail that wins people over: a steel drawer with 2 adjustable dividers, a non-slip liner, and 7 mounting points, so you can carve compartments that match how you actually work. It’s roomy enough for files and tech gear, not just screws. What most buyers talk about is the build quality and the sheer solidity of the thing — this is a bench that feels like furniture and takes abuse like a work surface. The one recurring note is height: at 37 inches, it’s a touch tall for shorter users who prefer to work seated.
What earns it first place
- 1-inch solid wood top finished in scratch-resistant polyurethane — clamps and hammers don’t faze it
- Organizer drawer with 2 adjustable dividers, 1 non-slip liner and 7 mounting points
- Four 3-inch casters, 2 locking, on steel hardware — roll it out, lock it down
- Graphite powder-coated alloy steel frame that reads as furniture in a garage
Where it gives ground
- 500 lb capacity is the lowest rating on this list — fine for assembly, not for an engine block
- 37-inch working height runs tall for seated work
Go with this if: you want one bench that moves around the garage and still looks good enough for the office.
Hold off if: the heaviest thing you’ll set down weighs more than a few hundred pounds — pick a higher-rated frame instead.
2. MUWOOD 48″ Heavy Duty Adjustable Work Bench
A 2,000-pound rating on a first-bench budget — the surprise of the entry tier.
Here’s a head-to-head worth stating plainly: the MUWOOD carries a 2,000 lb load rating while the Seville Classics above is rated at 500 lbs. Four times the rated capacity, on a frame that sits on fixed legs rather than casters. If your bench stays put and you load it hard, that trade favors the MUWOOD immediately.
The top is 48 x 24 x 1.18 inches of solid rubber wood, coated and polished for easy cleaning. Height adjusts through 6 positions from 28 to 40 inches with no extra tools, which covers sitting at the low end and standing at the high end. Pre-drilled holes on the back of the board mean you can have it standing in about 10 minutes with the included hardware.
It’s a newer listing with a smaller review base, so treat it as a bench you’re buying on spec, not on long track record. The quality and sturdiness of that rubber wood top are what people respond to, along with how quickly it goes together. No power strip and no pegboard here — you’re getting the frame and the top, and adding your own lighting and storage.
The value read: a 2,000 lb steel frame under a 1.18-inch rubber wood top for entry-tier money is the honest headline of this bench.
The honest limit: fixed legs mean you find a home for it and leave it there — no rolling it to the other bay.
Right for: the first-time garage bench where the load stays put and the budget is tight.
Wrong for: a shop that needs power at the surface or wheels under the frame.
3. VEVOR Adjustable Workbench, 48 x 20 Inch, 2000 LBS
Eleven height stops, a power strip on the top, and 2,000 pounds of rating underneath.
Say you’re drilling and the cordless battery dies mid-hole. On most benches that’s a walk to the wall. Here you plug straight into the surface: 4 AC outlets, 2 USB ports, and a 9.8 ft power cord, all built into the bench so your tools stay powered without a tangle of extension leads on the floor.
The working height adjusts through 11 levels from 28.5 to 38.3 inches — the widest range of stops in this group, which matters if two people of different heights share the bench. The 1-inch oak top resists cracking and sits on a corrosion-resistant steel frame, and four rubber adjustable feet level it on uneven concrete so it stops wobbling.
At 48 x 20 inches the surface is the narrowest here at 20 inches deep — plenty for tools and a cutting task, less so for spreading out a large project. What people notice first is the engineering and the finish, followed by how easily the legs level and how much the braces add to the rigidity. The build quality is rated highly, though opinions on the finer construction details split — worth knowing if you’re fussy about weld appearance.
Why it earns a spot: an 11-stop height range plus onboard power is a combination nothing else on this list pairs so completely.
Watch this: 20 inches of depth is the tightest top here — great for tools, cramped for large layouts.
Reach for this if: you share a bench between a tall user and a short one and want the outlets right at the work.
Look elsewhere if: you need to lay out wide sheet goods or heavy long stock.
4. Northsky 48″ Work Bench with Wheels, 2200 LBS
Pegboards on both ends, shelves above and below, and a 2,200-pound rating holding it all up.
The storage layout is what separates this bench from the pack. A rear shelf with 4 open compartments holds hardware and hand tools. A lower shelf swallows toolboxes and containers. And both sides carry widened steel pegboards with 5 long hooks and 6 short hooks between them, which keeps wrenches, pliers, and drills off the work surface and within reach.
The rating is 2,200 lbs on the main surface and 500 lbs on that lower shelf, on a reinforced steel frame under a 1-inch engineered wood top. Legs adjust from 27.9 to 43.4 inches — the highest top height in this group, useful if you’re tall or prefer to stand tall while working. Casters are included, so you can set it on wheels or swap to leveling feet on an uneven floor.
Power comes from a 1500W ETL-certified strip with 4 AC outlets, 1 USB-A port, 1 USB-C port, and a 6.5 ft cord. The one honest note: the hardware kit draws mixed reactions, so take assembly slowly and don’t over-torque. Everything else — sturdiness, adjustability, the sense that it fits where you put it — comes across as soundly built.
What the layout buys you
- Rear shelf with 4 open compartments plus a lower shelf for large toolboxes
- Dual steel pegboards with 5 long and 6 short hooks — tools off the bench, in reach
- 1500W ETL-certified power strip with 4 AC outlets and both USB-A and USB-C
- Adjustable legs from 27.9″ to 43.4″ with casters included
The fine print
- The hardware kit is the most-discussed weak spot — assemble patiently
- 1-inch engineered wood top, not solid wood, so refinishing isn’t an option
The fit: a cluttered garage that needs a home for every tool, not just a flat surface to work on.
The mismatch: a woodworker who wants a solid top they can sand and re-finish for decades.
5. CAMMOO 60″ Adjustable Workbench, 2000LBS
A 60-inch bench you can assemble solo, with a rubberwood top that looks like real furniture.
Sixty inches across is a different class of bench. Two 3D printers fit side by side on this one with room for the filament, which is exactly the setup it’s being used for in real workshops. The top is rubberwood, finished to a gloss, and the 2,000 lb capacity comes off a carbon steel leg base with adjustable glides that let it sit flat on uneven flooring.
Height moves through 6 settings from 28.5 to 39 inches using 360-degree tool-free knobs — no wrench hunt required, just twist and lock. Pegboards on both sides give you hanging space, and one side runs long enough to hold extra tools, with six hooks included so the workstation stays clear.
Power is an ETL-certified strip with 4 AC outlets, 2 USB ports, a switch, and a 6.5 ft wire, so a bench grinder, a work light, and a charger can all live on the bench. Sturdy and easy to put together is the broad verdict, and the value runs strong for a 60-inch solid-wood-top bench. The glossy finish is genuinely nice, but it will show scratches — put a mat down before you start cutting on it.
The standout: a 60-inch rubberwood surface plus 6 tool-free height stops, assembled by one person.
Small caution: that glossy finish is a showpiece, so it scratches if you cut directly on the top.
Pick it when: the bench is a long, shared surface — 3D printers, craft work, a home assembly station.
Skip when: you want a rough-and-ready surface you can abuse without a second thought.
6. VekMax 48″ Adjustable Workbench with Power Strip
The bench that drops to 25.9 inches — the answer for seated work and shorter users.
Most benches bottom out around 28 inches. This one goes to 25.9, then climbs through 10 preset positions to 38 inches. For anyone who works seated, or who finds standard bench height a stretch, that extra couple of inches of drop is the entire reason to pick it.
The frame is reinforced steel with a front cross beam and a rear support beam — the bracing that keeps a bench steady through sanding and assembly rather than skating across the floor. Rating is 2,000 lbs across a 48 x 24-inch rubberwood top, and the open-bench design leaves room underneath for a stool or a toolbox.
Power and storage live on a side-mounted panel: a pegboard combined with 4 AC outlets, 2 USB ports, and a 6.5 ft cord. You can also choose leveling feet or caster wheels when you order, and multiple units can be combined into an L-shaped layout. The review base is small and newer, so the quality and easy-assembly signal is promising but not yet proven over years — one owner’s note about running a heat press on it suggests it handles real load.
Where it wins: a 25.9-inch minimum height with 10 stops is the widest downward range here.
What to weigh: a smaller review history means less evidence on how the top and frame hold up long-term.
Best for: seated tasks, shorter users, and a workroom where you sit more than you stand.
Consider another: buyers who want a proven track record over several years of use.
7. WORKPRO 48″ Adjustable Garage Workbench, 1500 LBS
The one bench here with an FSC-certified rubberwood top and a 1mm steel frame.
If sourcing matters to you, this is the bench on the list that names it: an FSC-certified solid rubberwood top, 1 inch thick, under an eco-friendly transparent coating. The 48 x 22-inch surface leaves room for tools, projects, electronics work, or a 3D printer setup.
The frame is built from 1mm steel and rated to 1,500 lbs — lower than the 2,000 and 2,200 lb frames here, which is the trade for the certified top. Height adjusts through 5 settings from 30.5 to 39.4 inches on leveling feet, so you can flatten it out on a sloped garage floor. Assembly is claimed at 10 minutes with a video guide, and the kit includes everything.
Power runs off an ETL-certified strip with 4 AC outlets and 2 USB-A ports. Size is the aspect people talk about most with this bench — the working footprint is generous without being a wall-hog. It’s heavy-duty enough for pool pump work according to owner experience, and the adjustable feet are easy to dial in. It’s a general-purpose utility table rather than a specialist: 1,500 lbs, 5 height stops, and a 48-inch top.
What stands out
- FSC-certified solid rubberwood top — the only certified top on this list
- 1mm steel frame with leveling feet from 30.5″ to 39.4″ across 5 settings
- ETL-certified power strip with 4 AC outlets and 2 USB-A ports
What to weigh
- 1,500 lbs rated — well below the 2,000 and 3,000 lb frames here
- 5 height stops, less range than the 10 and 11-stop benches
The right buyer: someone who wants certified sustainable wood and a 48-inch footprint that does a bit of everything.
The wrong buyer: a heavy-load shop where 1,500 lbs won’t leave enough headroom.
8. HABUTWAY 60″ Height Adjustable Workbench
A 60-inch solid wood surface rated to 2,000 pounds, built to double as a desk and a dining table.
The HABUTWAY’s pitch is flat-out versatility: a 60 x 22-inch solid wood top over a precision-cut steel frame rated to 2,000 lbs, for hitting, dyeing, drilling, and cutting. It’s been used to hold 6-gallon carboys for wine racking. It’ll equally serve as a study desk, a craft station, or a spare dining surface when the garage door is open.
Height adjusts through 3 positions from 29.5 to 38.4 inches with no tools needed — enough to sit or stand, and low enough clearance underneath for storage. Power is an ETL-certified strip with 4 AC outlets, 2 USB ports, and a switch. It comes in multiple colours and cleans up easily.
The frame is solid and stable, and the assembly is straightforward with the included hardware. One tip worth passing on: leave every screw loose until all of them are threaded, then tighten at the end — it twists together far easier that way. The top is finished wood rather than a rough workshop surface, so plan on a mat for anything that scores or cuts.
Why it stands out: a 60 x 22-inch solid wood top on a 2,000 lb steel frame, with 3 height positions and onboard power.
The trade: 3 height settings is fewer than the 10 or 11-stop benches, so it’s a set-once bench, not a shared one.
Go for it if: you want one wide bench that handles repairs, crafts, and desk duty in the same space.
Pass if: two users of different heights need frequent adjustment.
9. Maemttes 60″ Solid Wood Work Bench with Drawers
Drawers, casters, outlets, and a 3,000-pound rating in one rolling 60-inch workstation.
Drawers are rare on a work bench, and that’s the reason to stop here. Integrated drawers keep screws, bolts, and small tools within arm’s reach and off the surface, which is exactly the clutter problem a 60-inch bench is meant to solve. You get integrated power too, for charging tools and devices straight from the bench and skipping the extension cord.
It holds up to 3,000 lbs (about the weight of a small motorcycle) on solid wood construction, so you can stack a full tool chest on it without the top sagging. The bench rolls on sturdy wheels, so you can shift the layout to fit the project — flip it from a standing workbench to packing station without unbolting anything. Height is adjustable for the stand-or-sit call.
The overall read is a quality, sturdy bench that assembles with clear instructions. Mobility and the built-in outlets with USB charge ports are what people bring up, along with how it suits a garage and even a visual arts studio. Note one spec-sheet quirk: the listing shows a 59-inch depth alongside a 23.6-inch width, which is clearly transposed — read the working surface as 60 inches, not 59. Confirm with the seller before you commit if that matters.
Where it pulls ahead
- Integrated drawers keep small tools and hardware off the work surface
- 3,000 lb capacity on solid wood — high headroom for heavy parts
- Wheels make it a layout you can move, not a bench you commit to
Worth a call
- The listing’s depth and width figures are transposed — confirm the surface dimensions before ordering
- Solid wood and casters together mean care when rolling across rough concrete
Suits: anyone whose bench clutter lives in loose piles of screws and bolts rather than a pegboard.
Doesn’t suit: someone who wants a fixed bench with zero rolling to worry about.
10. Granper 70″ Solid Wood Adjustable Work Bench
Seventy inches of solid wood top rated to 3,000 pounds — the widest surface here.
Seventy inches is a serious footprint. That’s long enough to lay out full-length stock, spread a project across the surface, and still have room for the tools beside it. The top comes in solid wood or chipboard, and the reinforced steel frame with metal legs is rated to 3,000 lbs for woodworking, tool repairs, and home improvement.
The smart part of this bench is choice. You can pick 4 swivel casters, 2 locking, for a mobile bench, or fixed legs for steady support under heavy work. You can also choose drawers for tools and small parts, built-in power outlets with USB ports, and an integrated pegboard — all depending on configuration. Sizes run 48, 60, and 70 inches.
Multiple height settings let you stand or sit and match the working post to your posture. The review base is newer and smaller, but the quality and easy assembly come through clearly, and it works for crafts, repairs, and gun cleaning alike. If you’re building a shop around one bench, the appeal is choosing casters or fixed legs, drawers, outlets, and pegboard instead of settling for what’s in the box.
The core win: a 70-inch top at a 3,000 lb rating, configurable with wheels or fixed legs and optional drawers, outlets, and pegboard.
The catch: which features land depends entirely on the configuration you order — check the listing for what’s actually included.
Fits: a dedicated shop where the bench is the center of the workflow and the surface is the point.
Misses: a one-wall garage where 70 inches crowds out the space you need to walk.
11. VEVOR 72″ Oak Top Workstation, 5000 lbs
Five thousand pounds, a 30mm oak top, and a 72-inch surface still open for real work.
This is the top of the load scale, and it isn’t close: 5,000 lbs of rated capacity, against the 2,000 lb VEVOR elsewhere on this list. That number traces to a Q235 triple-brace frame with front and rear crossbars under a 30 mm thick oak top. The Q235 triple-brace frame with front and rear crossbars is built to take carving, cutting, drilling, and welding without wobble or flex.
At 72 x 24 inches the surface runs 1,728 square inches — long and wide enough that a big project doesn’t crowd out the tools. The bench weighs 91.1 pounds, which matters when you’re moving it into place: that’s the mass behind the stability, and it isn’t a one-person lift.
Organization is built in: dual side pegboards with 20 hooks so your go-to tools hang clear of the surface. Power is a 10 ft cord feeding 4 AC outlets and 2 USB ports — the longest cord here, useful if you don’t work near an outlet. Height shifts from 29.1 to 39 inches across 6 positions by moving the leg bolts, which is a one-time adjustment rather than a tool-free dial. Solid and stable is the overall take, with the finish and appearance drawing compliments too.
The heavyweight case
- 5,000 lb capacity on a Q235 triple-brace frame — the highest rating on this list
- 30 mm thick oak top with 1,728 sq in of surface
- Dual pegboards with 20 hooks and a 10 ft cord feeding 4 AC outlets + 2 USB ports
The honest cost of that
- Height adjusts by moving leg bolts across 6 positions — set it, then leave it
- 91.1 lbs is real mass to shift into place
Made for: the workshop that puts heavy assemblies, welding rigs, or engines on the bench without thinking about limits.
Overkill for: a home bench used for sanding and light repair, where the lower-rated picks save weight and room.
Know the Specs
Load Capacity (and why 2,000 vs 5,000 matters)
Capacity is the maximum weight the frame is rated to support, usually assuming the load is spread across the top. The spread is the key part — a 2,000 lb bench holds 2,000 lbs distributed, not 2,000 lbs balanced on one corner. For general garage work, sanding, and assembly, a 2,000 lb rating is more than you’ll put on it. The 3,000 and 5,000 lb frames are for engines, welding fixtures, or heavy stock where precision-cut steel does the work rather than skill.
Top Material and Thickness
A solid wood or rubberwood top, typically 1 inch thick, gives you a clampable, hammerable surface you can sand and refinish later. A 30 mm oak top on a framing-grade steel frame holds up to direct impact. Engineered or chipboard tops cost less and look thick, but they chip at the edges and can’t be refinished. When you’re comparing a 1-inch wood top against a 30 mm oak top, think about the finish: one is easy to sand back, the other is a heavier slate.
Height Adjustment and Working Posture
Height settings range from 25.9 to 43.4 inches across these benches, with anywhere from 3 to 11 preset stops. More stops and a wider range matter when the bench is shared. A low minimum like 25.9 inches is the answer for seated work. A high maximum like 43.4 inches lets a tall user stand straight. If it’s only you at one task, three settings covers it — and one-time bolt adjustment is fine if you’ll never touch it again.
Power Strips, ETL Rating, and Cord Length
A built-in power strip typically gives you 4 AC outlets plus USB ports — 2 USB-A ports on most, or a USB-A and USB-C pair on some. The ETL certification listed on several of these benches means the strip has been tested to a recognized safety standard. Cord length is the practical spec: 6.5 ft on most benches, 9.8 ft on the VEVOR 48-inch, and 10 ft on the VEVOR 72-inch. The longer cord saves you from adding an extension lead to reach the bench.
Common Questions
What load capacity do I actually need on a work bench table?
Is a solid wood top better than an engineered wood top?
Can I roll a work bench table around a garage without it wobbling?
How tall should a work bench table be for standing work?
What does an ETL-certified power strip on a workbench mean for safety?
Can a work bench table handle a bench vise and hammering?
How long does assembly take on these benches?
Is 48 inches or 60 inches better for a work bench table?
What is the difference between adjustable legs and leveling feet?
Can I combine two work bench tables into one long layout?
Do these benches ship with the pegboard hooks and drawer dividers included?
The Bottom Line
For most garages, the work bench table that gets the job done is the Seville Classics UltraGraphite — a 1-inch solid wood top, a graphite steel frame, four 3-inch casters (wheels) with two locking, and an organizer drawer with 7 mounting points, at 4.5+ stars across 800+ ratings. It rolls on four 3-inch casters, two locking, and the graphite frame and wood top look good enough to keep indoors. Its one honest limit is the 500 lb rating; if you load heavy, step up. If load is your priority, grab the VEVOR 72-inch Oak Top at 5,000 lbs with 20 hooks and a 10 ft cord. And for a wide 60-inch bench that goes together solo, the CAMMOO 60″ Adjustable is the one to reach for.
How we choose
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of November 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Tactical Gear Guy earns from qualifying purchases. This does not affect which products we feature.