YETI’s Tundra Haul fits the Security Cable Lock & Bracket, Locking Bracket, Tie-Down Kit, Bear Proof Locks, Corner Chock Set, Beverage Holder, and Rod Holster, but not the Divider, Seat Cushion, or SeaDek.
YETI publishes a model-specific compatibility list for the Tundra Haul, and it is shorter than most people assume. Buying the wrong add-on for this particular wheeled body wastes money and, in the Divider’s case, simply will not install.
Which YETI Tundra Haul Accessories Are Compatible?
Seven YETI accessories are confirmed compatible with the Tundra Haul, and each mounts using hardware the cooler was built to accept. The Haul’s AnchorPoint tie-down slots, molded corners, and lid rails are the attachment points these add-ons rely on.
| Accessory | Fits the Haul? | What It Does |
|---|---|---|
| Security Cable Lock & Bracket | Yes | Locks the lid shut against theft or bears |
| Locking Bracket | Yes | Hardware base for padlock security |
| Tundra Tie-Down Kit | Yes | Straps the cooler through AnchorPoint slots |
| Bear Proof Locks | Yes | IGBC-approved design with extra-long Master Lock padlocks |
| Corner Chock Set | Yes | Stops the cooler sliding in a truck bed or boat |
| Beverage Holder | Yes | Holds drinks within reach on the lid rail |
| Rod Holster | Yes | Carries fishing rods on the cooler side |
| Divider, Seat Cushion, SeaDek | No | Not compatible with the Haul body |
One caution on the Bear Proof Locks: YETI describes the design as IGBC approved only when paired with extra-long-shank Master Lock padlocks. Confirm the specific lock and the requirements of the land management agency where you camp before trusting it around wildlife.
What Doesn’t Fit: The Haul’s Excluded Accessories
Three accessories sold for other Tundra models will not work on the Haul: the Divider, the Seat Cushion, and the SeaDek pad. The Haul also does not ship with a basket, and YETI does not list one as a compatible add-on.
The reason is body shape. The Tundra Haul is a wheeled cooler with a molded handle and NeverFlat Wheels, so the interior and lid geometry differ from a standard Tundra. A divider cut for a straight-walled Tundra tub has nothing to seat against here. Do not assume an accessory that fits a Tundra 45 or 65 will transfer — check the fit list for the Haul specifically before you buy.
Haul Specs That Affect Accessory Choice
The cooler holds 82 cans only or 64 pounds of ice only on YETI’s US listing. Those are separate single-use capacities, not a combined limit — do not add them together. The 5-year warranty covers the cooler, and dry ice is compatible with the Haul’s FatWall design and PermaFrost insulation. Follow YETI’s dry-ice instructions and vent the lid rather than sealing a block inside an airtight container.
When you strap the cooler into a truck bed or boat, use the AnchorPoint slots with proper tie-down equipment. Accessory compatibility does not substitute for real cargo-securing requirements, and a 37.50-pound cooler becomes a projectile in a hard stop without a strap.
How to Choose the Right Add-Ons for the Haul
Match the accessory to your actual use: security hardware and a tie-down kit solve theft and sliding, while the beverage holder and rod holster solve access on the water. For a side-by-side look at mounting options and prices, this tested roundup of YETI Tundra Haul accessories covers the options we actually run.
Before installing anything, pull up the accessory’s current product page and check the mounting hardware against the Haul’s AnchorPoint slots. Universal interchangeability across product generations, colors, or regional versions is not established, and YETI’s regional pages show different units and capacity figures. Buy from the US listings, priced in dollars, if you are in the United States.
YETI’s Tundra compatibility FAQ is the model-specific list to check against your specific cooler before you order.
Common Questions
Does the Tundra Haul take a basket insert?
No. YETI states the Tundra Haul does not come with a basket and does not list one as compatible. Some other Tundra models accept wire baskets, so do not buy one on the assumption it will fit the Haul’s wheeled body. Check the fit list for this model first.
Can I use a Tundra divider in the Haul?
No. The Divider is explicitly listed as not compatible with the Tundra Haul. The wheeled body and its molded handle change the interior geometry, so a divider cut for a standard Tundra tub will not seat properly. Plan your packing around a single large compartment instead.
Will YETI bear locks work on the Tundra Haul?
Yes, Bear Proof Locks are compatible. YETI describes the design as IGBC approved when used with extra-long-shank Master Lock padlocks, so use that pairing. Verify the requirements of the specific park or agency where you camp before relying on the lock for wildlife protection.
Sources
- YETI. “Tundra FAQ.” Source of the model-specific accessory compatibility list for the Tundra Haul.
- YETI. “Tundra Haul Wheeled Cooler.” Source of US pricing, dimensions, weight, capacity, warranty, and dry-ice guidance.
- YETI. “Tundra Haul.” Regional page showing metric dimensions and alternate capacity methodology.