Women’s snowboard pants are sized by waist, hip, and inseam measurements, then matched to a fit that leaves room for movement and your base layers.
Your jeans size will steer you wrong. Snowboard pants have to survive deep knee bends, a seated chairlift, and a boot cuff stuffed with liner — the tag number matters less than three tape measurements and how you actually ride. Burton’s chart runs XXS to 3XL, and the brand notes conversions are approximate and fit shifts by style.
How Do You Measure For Snowboard Pants?
Measure chest, natural waist, and hips against the body or over the base layers you plan to ride in, then take a body inseam and compare it to a garment inseam on pants you already like.
- Chest: tape under the arms, around the fullest part.
- Natural waist: around the narrowest point — not where your jeans sit.
- Hips: around the fullest part of the seat.
- Body inseam: top of the inner thigh down to the bottom of the ankle. For a longer trouser preference, Burton notes measuring farther down the lower foot.
- Garment inseam: crotch seam to hem on a pair that already fits well.
That last step is the one most people skip. Body inseam tells you about your leg; garment inseam tells you where the hem will land relative to your boots.
The Burton Women’s Outerwear Chart
Burton’s US women’s chart maps XXS–3XL to numeric sizes 00–20, with inches converted from published centimeters.
| Size (Numeric) | Natural Waist (in) | Hips (in) |
|---|---|---|
| XXS (00) | 22–24 | 32–34 |
| XS (0–2) | 24–26 | 34–36 |
| S (4–6) | 26–28 | 36–38 |
| M (8–10) | 28–30 | 38–40 |
| L (12–14) | 30–33 | 40–43 |
| XL (16) | 33–37 | 43–46 |
| XXL (18) | 37–41 | 46–48.5 |
| 3XL (20) | 41–45 | 48.5–52.5 |
Treat every number as approximate. Burton’s size chart page states conversions are approximate and fit varies by style and preference. Between two sizes, the deciding question is how much room your layering plan needs.
Slim, Regular, Relaxed, Or Baggy: Which Fit Works?
For most resort riding, regular or relaxed is the practical starting point — slim only makes sense in minimal layers.
- Slim/streamlined: skims the body while allowing full range of motion; close at chest, hip, and thigh.
- Regular: neither tight nor loose; room for layering and movement.
- Relaxed: looser, with ample space for layers and maximum movement.
- Baggy: roomiest cut; drapes with generous layer space.
Pick the fit first, then the size inside that fit. A slim pant and a baggy pant in your measured size behave like two different garments. Bulky insulation, freestyle mobility, or a loose silhouette pushes you toward relaxed or baggy. Minimal layering and a trim look pushes you toward slim — with the caveat that a tight fit plus knee protection restricts movement.
Many riders shop by model rather than number. To see how specific cuts run, this roundup of tested women’s snowboard pants pairs the sizing math with hands-on notes.
The Mistakes That Sink A Size Order
Most bad orders trace back to measuring the wrong thing rather than picking the wrong letter.
- Measuring over bulky clothing instead of against the body or intended base layers.
- Substituting jeans or street-pant sizing for the outerwear chart.
- Choosing by waist alone, then finding the seat and thighs restrict your squat.
- Confusing body inseam with garment inseam, ending up with a hem that drags or rides up.
- Picking a tight fit without counting base layers, knee protection, or insulation.
- Adding length without checking boot compatibility and cuff construction.
- Assuming every brand — or Burton model — uses identical numeric sizing. It doesn’t.
Then test it: squat deep, sit down, mimic edging, and walk in your boots. Waist closures should stay put without compressing your breathing, cuffs must clear or sit cleanly around the boots, and the system has to keep full range of motion with layers on. Burton’s current women’s snowboard pants, including the [ak] Summit GORE-TEX 2L Pants, use the same XXS–3XL chart and inseam guidance.
Common Questions
Should I size up in snowboard pants?
Size up only when your measurements land near the top of a range and you plan heavy layering or knee protection. With a thin base layer, your measured size usually works. Use the stated fit as the tiebreaker rather than defaulting to a bigger number.
Can I wear regular winter pants snowboarding instead?
You can, but you’ll likely lose waterproofing and cuff coverage where it counts. Snowboard pants are cut to clear boots, block snow on a seated lift ride, and allow a deep squat. Street or fashion winter pants often bind at the hip and soak through.
How do I know if the length is right?
Check garment inseam against a pair you already own, then confirm the hem clears your boot without dragging. With boots on, the cuff should sit over or around the boot and stay off the ground when standing normally. Extra length raises snow-drag risk.
Sources
- Burton Snowboards. “Size Charts” Source for the XXS–3XL women’s outerwear measurements and the note that conversions are approximate.
- Burton Snowboards. “Women’s [ak] Summit GORE-TEX 2L Pants” Confirms the model uses the standard women’s outerwear chart and inseam guidance.
- Burton Snowboards. “Women’s Snowboard Pants” Current collection listing the same women’s outerwear sizing information.