Measure length and width separately, standing in your normal socks, and fit the larger foot.
A longer size won’t fix a shoe that pinches across the forefoot. Length and width are separate dials; turning only the length one leaves a shoe too long in front while still squeezing the sides. This guide covers measuring both feet, reading the letter codes, and confirming fit before the box ships.
What Do the Width Letters B, D, 2E, and 4E Actually Mean?
Width letters are manufacturer-specific labels, not a universal scale, so the chart on the exact product page always overrules any rule of thumb. On New Balance’s US men’s and unisex charts, B is narrow, D is standard, 2E is wide, and 4E is extra-wide.
The numbers vary by model too. In the Made in USA 993, a men’s/unisex US size 10 measures roughly 10.2 cm at B, 10.6 cm at D, 10.9 cm at 2E, and 11.3 cm at 4E — that shoe’s own fit chart, not a cross-brand conversion table.
Women’s lettering can follow a different sequence than men’s and unisex sizing. Don’t convert by matching letters. New Balance publishes separate printable men’s, women’s, and children’s sizing tools and points shoppers to the chart on each product page.
How to Measure Your Foot for Width and Length
Measure while standing, in the socks you’ll wear, and measure both feet. Standing loads the foot so it spreads to its true width, which a seated measurement misses.
- Print the sizing tool at its intended scale. A shrunken or stretched printout invalidates the numbers.
- Stand on the tool with weight evenly distributed.
- Mark the widest part of the foot for width and the longest point for length.
- Compare both numbers against the chart for the exact model you’re buying.
- Repeat on the other foot. Feet often differ slightly — fit the larger one.
- Recheck with the insoles or orthotics you plan to wear.
A physical fitting follows the same logic. Walk in both shoes. The toe box should let your toes spread without touching the front or sides, the midfoot under the arch and over the top should feel snug but not tight, and the heel should stay put without slipping.
If the forefoot is the problem, buy the wider width rather than sizing up. Extra length adds room in front of the toes but does nothing for a compressed forefoot and can leave the arch and heel in the wrong place.
Which Fit Mistakes Throw Off the Measurement?
- Measuring one foot only. The smaller foot’s number gets applied to both, and the larger foot suffers.
- Measuring seated. The foot doesn’t spread under body weight, so the width reads narrow.
- Using a generic chart. Internal shape varies by model. New Balance publishes separate fit charts on product pages, including the Made in USA 993, Made in USA 990v6, FuelCell Rebel v5, 577v1, 574, and 471.
- Assuming wide means only a wider toe box. A width change shifts the fit through the forefoot, midfoot, and heel. Check the heel doesn’t slip once you go up a width.
- Trusting an old pair’s size. Different models, versions, materials, and lasts fit differently. Verify against the current product page.
- Skipping the insole. A thick orthotic eats volume, and a shoe measured without it can feel tight with it in place.
| New Balance Width | Men’s/Unisex Label | 993 Size 10 Width |
|---|---|---|
| B | Narrow | ~10.2 cm |
| D | Standard | ~10.6 cm |
| 2E | Wide | ~10.9 cm |
| 4E | Extra-wide | ~11.3 cm |
Width options vary by model, size, color, and region — the 990v6 page, for instance, lists Standard (D) and Wide (2E), while several men’s and unisex charts carry B, D, 2E, and 4E columns. Confirm the exact combination is in stock before you commit. New Balance’s size and width guide is the reference to check.
When a Wide Shoe Still Isn’t Enough
Correct width solves most forefoot pressure, but it isn’t a substitute for medical advice. Too narrow a shoe can cause pressure points, rubbing, blisters, or crowded toes; too wide lets the foot slide, which costs stability.
Pain, numbness, ongoing rubbing, skin breakdown, or worsening symptoms deserve a professional look — especially with diabetes, neuropathy, circulation problems, a foot deformity, or past foot surgery. A sizing chart can’t diagnose a foot condition.
The 993’s centimeter figures apply to that model’s US chart only, not every brand, country, or footwear category. Specs and availability change, so verify the model page before ordering. For shoes already vetted for roomy forefeet, this roundup of tested women’s wide comfort shoes is a practical next stop.
Common Questions
Should I size up or buy a wider width?
Buy the wider width when the forefoot feels compressed. Sizing up adds length in front of the toes without fixing the squeeze across the ball of the foot and can push the arch and heel out of position. Size up only when the length itself is short.
Can I measure my foot width at home without a printable tool?
Yes. Stand on a sheet of paper, mark the widest points across the ball of the foot and the longest point, then measure with a ruler. Compare against the specific model’s chart, since letter widths differ by brand.
Does a wide width always mean a roomier toe box?
Not automatically. Going up a width changes the fit through the forefoot, midfoot, and heel, so a shoe can gain toe room and still feel loose at the back. Walk in both shoes and confirm the heel stays secure.
Sources
- New Balance. “Size & Width Guide” Source for width letter definitions and model-specific fit charts.
- New Balance. “Product & Fit FAQs” Supports guidance on comparing measurements to individual product pages.
- New Balance. “Women’s Sizing Tool” Source for the standing measurement procedure and print-scale warning.