Whirlpool’s filter family names (Filter 1 through 6, plus Filter A) are not interchangeable, so the safest match comes from the number printed on the old cartridge combined with your refrigerator’s full model number.
A cartridge that looks identical can belong to a different filter family, and a wrong match shows up fast: weaker dispenser flow, smaller ice cubes, longer pour times. The trick is finding the model number before you order, not after the box arrives. Three places give you the answer — the old cartridge, the refrigerator’s model plate, and Whirlpool’s model-support page — and the steps below walk through them in order.
Where Is The Filter Number Actually Printed?
Start with the cartridge already in your refrigerator. Whirlpool advises selecting the package that matches both the filter’s number and brand for an exact fit, so read the label end to end rather than relying on shape or color.
Common Whirlpool-family cartridges break down like this:
- Whirlpool Filter 2: WHR2RXD1
- Whirlpool Filter 4: WHR4RXD1 (the two-pack is WHR4RXV2P)
- everydrop Filter 3: EDR3RXD1 (two-pack: EDR3RXV2P)
- everydrop Filter 4: EDR4RXD1
- Whirlpool in-line filter: 4378411RB
Watch for a second layer of numbering. Replacement pages list “replaces” references that also appear on old cartridges and packaging: Whirlpool says Filter 4 replaces W11256135 and W11311161, while everydrop Filter 3 replaces P1WB2 and P1WB2L. Any of those codes pointing to the same family is a good sign — it is not proof on its own, which is why the next step matters.
One more distinction to keep straight: the in-line filter 4378411RB is a different animal from a numbered internal or grille-mounted Ice & Water cartridge. Both are sold for Whirlpool refrigerators, and neither swaps into the other’s slot.
How Do You Confirm The Filter Against Your Refrigerator Model?
The refrigerator’s model number is the tie-breaker, and Whirlpool’s official guidance puts it inside the refrigerator, on the wall. Copy the complete string, letters and suffixes included — partial numbers pull up the wrong documentation.
With the full model number in hand, open Whirlpool’s owner-support page and look up that model. Whirlpool’s page for model WRS325FDAM, for example, lists WHR1RXD1 as the compatible Whirlpool Refrigerator Water Filter 1. That is the confirmation you want: your model number, the manufacturer’s own compatibility listing, the exact filter code.
Resist the shortcuts. Refrigerator size, configuration, color, and cartridge appearance are not compatibility signals. Neither is a retailer’s “fits Whirlpool” badge — compare the exact replacement references against Whirlpool’s documentation before you buy. Once you know the code, a roundup of tested filters for Whirlpool refrigerators can help you sort the genuine options from the lookalikes.
What Does A Filter Cost And How Often Should It Change?
All of it is subject to change.
Replacement timing is simpler: every 6 months, when the indicator light activates, or sooner if flow drops. Whirlpool also expresses the interval as 6 months or 200 gallons on applicable filters, and treats a flow decrease before the six-month mark as a possible clogged filter worth swapping early. Refrigerators without a filter-status indicator fall back to the plain six-month rule.
| Cartridge | Model Number | Two-Pack Code |
|---|---|---|
| Whirlpool Filter 2 | WHR2RXD1 | — |
| Whirlpool Filter 4 | WHR4RXD1 | WHR4RXV2P |
| everydrop Filter 3 | EDR3RXD1 | EDR3RXV2P |
| everydrop Filter 4 | EDR4RXD1 | — |
| Whirlpool in-line | 4378411RB | — |
| Filter 4 replaces | W11256135, W11311161 | — |
| everydrop Filter 3 replaces | P1WB2, P1WB2L | — |
Do not confuse the cartridge number with the package model number — Whirlpool Filter 4 is WHR4RXD1, but a two-pack carries WHR4RXV2P. Ordering the single code when you wanted two is an easy slip.
How Do You Install It And Reset The Indicator?
Whirlpool states replacement takes under 5 minutes on applicable products, though the exact removal and installation steps vary by refrigerator model — your owner’s manual is the authoritative source, retrievable with the complete model number.
The indicator reset is where models diverge most. Whirlpool gives one model-specific example: press and hold Freezer and Drawer for 3 seconds to reset the water-filter status, and the “Replace Filter” icon should turn off. Do not assume that combination applies to your refrigerator; check its control panel documentation instead.
If a clogged filter has to stay in place a little longer, Whirlpool says removing it puts the water system into bypass mode, which restores flow — but the water runs unfiltered until a new cartridge goes in. Whirlpool’s water filter replacement guidance covers the timing details, and its filter replacement and indicator reset page walks through the swap and the status light.
Common Questions
Can I Use The Same Cartridge Across Two Different Whirlpool Refrigerators?
Only if Whirlpool’s model-support page lists that cartridge for both refrigerators. Filter families are tied to specific models, and identical-looking cartridges from different families will not seat or seal correctly. Check each refrigerator’s complete model number separately before assuming one cartridge covers both.
What Happens If I Install The Wrong Filter?
An incorrectly installed or clogged filter can reduce dispenser flow, produce smaller ice cubes, cut ice production, and lengthen dispensing time. If the cartridge does not seat properly, remove it and recheck the number against your model before forcing it. A wrong-family cartridge may fit loosely or not at all.
Does Whirlpool Sell Filters By Subscription?
Whirlpool’s US site displays refill pricing for its filter families, and subscription eligibility is tied to specific products and regions. The figures above reflect current listed prices and promotions, which change over time — recheck the product page before ordering so you are not working from an outdated number.
Sources
- Whirlpool. “Find Your Model & Serial Number” Confirms refrigerator model and serial numbers appear inside the refrigerator, on the wall.
- Whirlpool. “When to Change the Water Filter” Supplies the 6-month / 200-gallon interval and early-replacement guidance.
- Whirlpool. “Replace Filter – Refrigerator” Documents the model-specific Freezer + Drawer reset and the bypass-mode behavior.