What Is a YTX4L-BS Battery and What Does It Power? | Size, Specs, Fitment

A YTX4L-BS battery is a 12-volt sealed lead-acid battery, typically 3 Ah and 50 CCA, that starts motorcycles, scooters, ATVs, and other small powersports engines.

A dead battery on a 250cc dirt bike usually announces itself with one slow, grinding crank. The replacement you need is a small sealed brick of a battery — roughly 4.4 inches long and under 3 pounds — and the YTX4L-BS is the size designation stamped on a huge share of them. Knowing what those letters actually mean saves you from buying a battery that bolts in but won’t crank.

What Does the YTX4L-BS Designation Actually Mean?

YTX4L-BS is a battery size and fitment code, not a brand or a single model, so two batteries with the same label can differ in chemistry, cranking power, and terminal layout. The code tells you the case will likely fit a given battery box; it does not promise identical performance.

That distinction matters because AGM, gel, and lithium versions all get sold under the same designation. A conventional sealed lead-acid YTX4L-BS runs about 2.9 to 3.0 pounds and delivers around 50 cold-cranking amps. Same label, very different battery.

Related codes float around too: YT4L-BS, GTX4L-BS, ETX4L-BS, CTX4L-BS, and a dozen similar variants. They are not automatically interchangeable. Terminal arrangement, polarity, case dimensions, and CCA have to match your vehicle, not just the name on the box.

What Vehicles and Equipment Does It Power?

The battery supplies starting current and low-voltage power to small powersports machines — motorcycles, scooters, ATVs, UTVs, dirt bikes, snowmobiles, and some personal watercraft and jet skis. It also turns up in backup-power and small-equipment applications.

Retailer fitment records tie YTX4L-BS products to vehicles such as the Suzuki DR250SM (1991) and Adly models, but a size code alone never proves fitment for every year or trim. Your vehicle manufacturer’s replacement-battery spec is the final word. Confirming voltage, dimensions, polarity, terminal style, CCA, and chemistry before you buy takes two minutes and prevents the most common return.

When you’re ready to compare options, the tested picks in this roundup of the best YTX4L-BS batteries cover the main AGM and lithium contenders side by side.

How Do the Specs Compare Across Versions?

Conventional sealed lead-acid and lithium versions share a footprint but almost nothing else, and the table below shows where they split.

Spec Typical AGM/Lead-Acid Lithium (LiFePO4)
Nominal voltage 12 V 12.8 V
Capacity 3 Ah (3,000 mAh) 3 Ah
Cold-cranking amps ~50 CCA Up to 150 CCA
Weight ~2.9–3.0 lb ~0.82 lb
Length ~4.40–4.45 in ~4.44 in
Width ~2.75–2.90 in ~2.75 in
Height ~3.35–3.42 in ~3.25 in
Charger requirement Standard lead-acid charger Lithium-compatible charger only

Polarity is commonly negative on the left and positive on the right when viewed from the terminal side, but check your vehicle before installing. Terminals are usually bolt-and-nut style, with some listings offering quad-terminal designs.

How Do You Install and Charge It Safely?

Disconnect the negative cable first when removing the old battery, and connect the positive cable first when installing the new one, then the negative. Never reverse polarity or let a wrench bridge both terminals.

  • Secure the battery firmly — vibration kills small batteries fast.
  • Match your charger to the chemistry: sealed AGM needs a compatible lead-acid setting, and lithium needs a charger explicitly rated for lithium.
  • Charge lead-acid batteries in a ventilated area, away from sparks and flames, with eye protection on — charging can release explosive hydrogen gas.
  • Some Yuasa acid-pack versions ship uncharged and must be filled and charged per the manufacturer’s instructions before installation.

If the battery cranks slowly after a full charge, or the terminals show corrosion, replace rather than revive. A Yuasa YTX4L-BS AGM battery listing from J&P Cycles shows 50 CCA, a one-year manufacturer warranty, and an acid pack that requires charging before installation — a useful reference point for what a conventional sealed version includes.

Common Questions

Can I swap an AGM battery for a lithium one?

Sometimes, but only if the lithium version matches your case dimensions, polarity, and terminal layout, and you use a lithium-compatible charger. Lithium replacements can deliver far higher cranking amps and weigh under a pound, but your vehicle’s charging system and charger must support the chemistry.

How long does a YTX4L-BS battery last?

Service life varies with chemistry, riding frequency, and charging habits. Lead-acid versions generally need replacement sooner than lithium, and a battery left discharged in storage degrades quickly. Keeping it on a maintainer during off-season storage extends life noticeably.

How do I know if the YTX4L-BS fits my bike?

Check your vehicle manufacturer’s replacement-battery specification, then compare dimensions, polarity, terminal style, CCA, and chemistry against the product listing. The size code alone is a starting point, not proof of fitment for every year or trim.

Sources

Scroll to Top