What Is a UHS-II microSD Card and How Is It Different From UHS-I?

A UHS-II microSD card uses a two-row, 16-contact interface that raises the maximum bus speed to 312 MB/s, while UHS-I tops out at 104 MB/s.

A UHS-II card only reaches that rate in a device built to support it — and that catch matters more than the headline number. The second row of contacts carries a Low-Voltage Differential Signaling (LVDS) connection the SD Association added in specification version 4.00. UHS-I cards stay on a single 8-contact row and version 3.01. Both keep the identical microSD footprint, so the difference lives entirely in the pins and the electronics behind them.

What Separates UHS-II From UHS-I?

UHS-II is a bus-interface generation, not a speed guarantee, and the gap between the two standards shows up in the interface, the contact count, and the signaling method. The SD Association’s standards documentation lists the maximum bus speed for UHS-I at 104 MB/s through SDR104 mode, with 50 MB/s in SDR50 or DDR50. UHS-II reaches 156 MB/s in full-duplex mode and 312 MB/s in half-duplex.

That jump comes from the added contacts. UHS-I microSD cards use one row of 8 pins and single-ended signaling. UHS-II microSD cards use two rows of 16 pins, with LVDS running on the second row. Supply voltage follows the same split: the first row runs at 2.7–3.6 V for UHS-I and 3.3 V for UHS-II, while the UHS-II second row needs 1.70–1.95 V.

One number often gets mixed up: full-size SD UHS-II cards carry 17 contacts, microSD UHS-II cards carry 16. Both capacity and bus interface remain separate labels. microSDHC covers above 2 GB through 32 GB, microSDXC covers above 32 GB through 2 TB, and microSDUC covers above 2 TB through 128 TB. Any of those capacities can carry a UHS-I or UHS-II interface.

Attribute UHS-I microSD UHS-II microSD
SD specification version 3.01 4.00
Maximum bus speed 104 MB/s (SDR104) 312 MB/s half duplex
Contact rows One row, 8 contacts Two rows, 16 contacts
Signaling Single-ended LVDS on second-row pins
Second-row voltage None 1.70–1.95 V
Capacity classes SDHC, SDXC, SDUC SDHC, SDXC, SDUC
App Performance Class A1, A2 A1, A2

Does a UHS-II Card Speed Up a UHS-I Device?

No — a UHS-II card in a UHS-I-only slot falls back to whatever mode that host supports, and the extra pins do nothing. The card still works, because the first-row contacts follow the older interface, but you get UHS-I performance at best. Buying a UHS-II card for a device that only reads UHS-I wastes the premium.

To use the second-row interface you need a UHS-II-compatible microSD slot or reader.

Even in a correct host, actual throughput depends on the card’s flash memory, controller, file system, workload, and heat — not just the bus ceiling. UHS-II’s 312 MB/s is a maximum interface rate, never a sustained write figure.

How Do You Identify and Use One Correctly?

Read the card label for the letters UHS-II and confirm the host supports it, because markings like U3, V30, or A2 describe speed classes and application performance, not the bus generation. “U3” in particular is a UHS Speed Class rating, not UHS-II.

Those figures belong to that specific product — environmental and durability claims vary by model, so don’t assume every UHS-II card is waterproof or X-ray-proof.

  1. Confirm UHS-II on both the card label and the host specification.
  2. Use a UHS-II-compatible slot or reader for full interface speed.
  3. Format the card with the host device’s documented procedure, backing up first since formatting erases contents.
  4. Eject or unmount safely before pulling the card to avoid file-system corruption.
  5. Buy from an authorized seller — counterfeit media can misreport capacity and sustained speed.

If you’re weighing specific cards for a camera or drone, this roundup of tested UHS-II microSD cards covers capacities and real-world read/write results. The SD Association’s bus speed overview documents the interface rates behind both generations.

Common Questions

Will a UHS-II card work in my phone or action camera?

Usually yes, as long as the device accepts microSD. The card runs through the first-row contacts at whatever interface the device supports. If that device is UHS-I only, you’ll see UHS-I speeds and none of the UHS-II benefit, though the card remains fully usable.

Can I tell the generations apart just by looking?

Flip the card over. UHS-II microSD cards have a second row of pins below the standard row, for 16 contacts total. A standard UHS-I card shows only 8. The bus label on the front reads UHS-II when present, but the physical pin count is the clearest confirmation.

Does a bigger advertised speed always mean faster transfers?

No. Advertised read figures are peak sequential rates under ideal conditions. Real transfers are limited by the reader, the USB connection, the file sizes involved, and the card’s write performance, so a card’s read number is not a reliable predictor of how fast your files actually move.

Sources

Scroll to Top