Almost every modern skateboard wheel is cast from polyurethane, a synthetic elastomer tuned for rebound, grip, and wear resistance.
A wheel that feels dead underfoot and flat-spots on the first hard slide usually isn’t worn out — it was poured from the wrong urethane recipe. The material behind skateboard wheels is polyurethane, and the way that polyurethane is formulated, cast, and cured decides nearly everything about how a board rolls, grips, and slides.
Below is what the stuff actually is, how a wheel goes from liquid resin to finished product, and which numbers on the packaging tell you what you’re buying.
What Material Are Skateboard Wheels Actually Made Of?
Skateboard wheels are made of polyurethane, a cast elastomer rather than a plastic or a rubber. Northstar Polymers, which supplies casting resins to wheel makers, identifies PTMEG-based polyurethane casting resin as a common formulation for skate wheels, and BASF describes longboard wheels built from polyurethane cast elastomers.
The reason polyurethane wins is a balance no single alternative matches. It is harder than rubber yet still flexes, so it absorbs impact without losing shape. It resists abrasion and flat spots. It holds up against oil, water, and chemicals with minimal swelling. And it rebounds — Northstar lists rebound values between 46% and 59% across example wheel formulations, which is the property that lets a wheel return energy after it deforms instead of soaking it up.
Polyurethane is not one fixed recipe. A manufacturer adjusts the polymer chemistry, the hard and soft segments, the curing schedule, colorants, additives, and the molded profile to hit a specific ride. In one BASF longboard-wheel system, MDI molecules form the hard segment while PolyTHF serves as the soft segment.
How Polyurethane Wheels Get Made
Most urethane wheels are poured as liquid resin into a heated mold, cured in an oven, then finished to final dimensions. Northstar’s process description lays out the sequence plainly.
- Resin components are mixed at room temperature according to the manufacturer’s formulation.
- The mixture is cast into a heated mold.
- The molded wheels are post-cured in an oven to develop full physical properties.
- Treads, profiles, and bearing seats may be machined after casting to hit OEM or custom specs.
- Finished wheels are inspected for dimensions and tolerances.
BASF describes a related cast-elastomer route in which wheels are cast in metal molds at processing temperatures around 50 °C, then reworked after cooling and hardening. Either way, the mold and the cure do as much work as the chemistry.
Reading Hardness And Size Before You Buy
Wheel hardness is measured in durometer, usually on the Shore A scale, with harder wheels moving to Shore D. Hardness is a property of the polyurethane formulation, not a separate material.
Common skateboard-wheel hardnesses run 99A, 100A, and 101A, plus the 83B and 84B range, with manufacturer offerings spanning 75A–103A and 75B–90B. Those ranges are what individual makers sell, not a universal industry standard, so compare numbers within a brand rather than across them.
Solid-polyurethane wheels commonly measure 48–65 mm in diameter and 25–40 mm wide, with typical skate sizes landing between 50 × 28–30 mm and 60 × 33–36 mm.
| Durometer Range | Typical Use | Rebound |
|---|---|---|
| 75–80A | Cruiser, longboard, inline, roller skate | 59% |
| 80–85A | Cruiser, longboard, roller, inline | 58% |
| 85–90A | Skateboard, scooter, roller skate | 53% |
| 90–95A | Fast-rolling skateboard, scooter | 46% |
| 50–55D | Speed-focused skateboard | 46% |
Softer urethane grips and cushions rough pavement; harder urethane rolls faster and slides cleaner. For a tested shortlist across those hardness bands, this roundup of tested skateboard wheels saves a lot of guesswork.
What Is Not Part Of The Wheel Material
A skateboard wheel’s rolling body is solid polyurethane — bearings and bearing spacers are separate components, not part of the wheel material itself. Some designs bond urethane to a metallic or nonmetallic core, but that bonding is a specialized manufacturing requirement rather than standard construction.
Fit matters as much as compound. Match wheel diameter and width to the deck, trucks, and available clearance, because oversized wheels can contact the deck mid-turn. Hardness, diameter, profile, and contact patch together decide grip, speed, vibration, and slide behavior — which is why two wheels with identical durometer numbers can ride completely differently.
A final note on chemistry: Northstar and BASF both treat urethane as a tunable system, not a fixed product, so the same 99A stamp from two brands can hide two very different formulations.
Common Questions
Are Skateboard Wheels Plastic Or Rubber?
Neither. Skateboard wheels are polyurethane, a cast elastomer. Polyurethane is harder than rubber but still flexible, which lets it absorb impacts while holding shape, and it resists abrasion far better than either plastic or rubber would under a skateboard’s load.
Why Do Wheels Have Different Durometer Ratings?
Durometer describes how hard the polyurethane formulation is, and hardness changes how a wheel performs. Softer wheels grip and absorb vibration; harder wheels roll faster and slide more predictably. The rating reflects the formulation, not a different base material.
Can You Put Any Size Wheel On A Skateboard?
No. Wheel diameter and width must match the deck, trucks, and available clearance. Oversized wheels can contact the deck during turns, so check clearance before sizing up — larger wheels also change how the board accelerates and how much vibration reaches your feet.
Sources
- Northstar Polymers. “Skate Wheel Polyurethane General Information.” Source for casting process, rebound values, and example formulations.
- BASF. “Longboard Wheels.” Source for cast elastomer process and hard/soft segment chemistry.
- Aragon Elastomers. “Polyurethanes.” Reference on polyurethane properties including abrasion and water resistance.